[ns] problem with installation of ns2.33 on redhat liux

No rule to make target 'VERSION' needed by 'gen/version.c'. stop. ns make failed! please help me, i need the ns to do my thesis work, best regards Anas Explore the seven wonders of the world Learn more!

[ns] implemention malicious node in MANET over DSR

I am doing some research to provide security to MANET. However, I am stuck by the way how to simulate one or more malicious node(s) in one MANET scenario, such the nodes that drops the forwarding packets intentively, or absorbs all packets to it, or duplicates the forwarding packets. Is

[ns] how to implement watchdog and promiscuse mode

Dear ns users, could you please give my an information about implementing watchdog technique and how to change the mode to promiscuous mode thanks in advance

[ns] how to send an acknowledgment to the one before the previous hop in dsr SR

Dear NS-Users Please I need to send an acknowledgment to the node which is before the previous one through the source rout in DSR, just I need to implement a TWOACK approach, I mean where should I but the code, and is there a packet format for network layer acknowledgments. Thanks in

[ns] how to send an acknowledgment to the one before the previous hop in dsr SR

Dear NS-Users Please I need to send an acknowledgment to the node which is before the previous one through the source rout in DSR, just I need to implement a TWOACK approach, I mean where should I but the code, and is there a packet format for network layer acknowledgments. Thanks in

[ns] Watchdog Algorithm position in the dsragent

Dear, ns users is it right to put the code of the watchdog technique in the SendOutPacketWithRoute please help anas

[ns] Watchdog time out and threshold

Dear ns users, depend on what can I set he value of timeout and threshold of the watchdog technique best regards

[ns] what is the GAF Packet

Please if anybody knows about this type of packet help me best regards Anas

[ns] Fw: alarm in dsr

From: anas Sent: Saturday, December 20, 2008 12:58 PM To: ns Subject: alarm in dsr Dear all, I need to generate alarm in dsr. is it an regulare route error or there is another type of packets, Best Regards

[ns] should i have to change the seed number each run or there is another way to do so

dear all, is there any way to change the seed number automatically please help me best regards Anas KFUPM COE

[ns] Fw: should i have to change the seed number each run or there isanother way to do so

-- From: anas saba717...@hotmail.com Sent: Tuesday, December 23, 2008 11:35 PM To: ns ns-users@ISI.EDU Subject: [ns] should i have to change the seed number each run or there isanother way to do so dear all, is there any way to change

[ns] how to print route cach of dsr nodes

please all, I need just to know what are the contents of the cach of any node using dsr routing protocol thanks in advance

[ns] how can i purge specific route form the cache of dsr nodes

dear all, please help me, how can i purge specific route form the cache of dsr nodes thanks in advanced Anas

[ns] Fw: generating video traffic

From: anas Sent: Monday, February 02, 2009 11:38 PM To: ns Subject: generating video traffic Dear all, could you tell me how can I generate a video traffic over DSR Thanks in advance Anas KFUPM

[ns] please how can i generate VBR (video) traffic in ns2

Dear all, please help me how can I generate a video traffic or VBR traffic and how can I simulate H.264 Thank you in advance Anas KFUPM

[ns] committee presentation

best regards Anas

[ns] video traffic generator

Dear all, please it is very important for me, I have searched for many times in the internet to get an understandable description about the video traffic generator , I need to use it in my thesis work on DSR Best Regards, Anas KFUPM

[ns] Fw: vedio traffic output e-e delay is not reasonable

From: anas Sent: Monday, March 16, 2009 3:41 AM To: ns Subject: vedio traffic output e-e delay is not reasonable Dear all, I have used the MPEG4 traffic of TES model over DSR but the end to end delay was not reasonable it was 5 s in average please if you have any suggestion

[ns] how to get the coordinates of the nodes in evrey period of time

Dear users how to get the coordinates of the nodes in evrey period of time Regards Anas

[ns] how to build a scenario from 100 node and 2000 x 2000 flat erea

Dear NS users , I have generate a mobile scenario of 100 node in ns2.33 with flat area of 2000 x 2000 my ram was 512 with pantium 3... 3mhz the ns does not respond what is the problem , I used setdest command best ragrads, Anas

[ns] how can i get the node coordinates to the c++ file

Dear users, I need to get the node coordinates to the c++ file I am working in dsragent.cc file and I need to get the nodes coordinates to do some calculations thanks in advance Anas

[ns] please is there an extra fields in the DSR header that can i use to classify the packets

Dear users, I need just one bit in the DSR header to use it for classifying the packets to two types is it found best regards, Anas

[ns] unreasonable average end to end delay of TES video traffic model

in advance Anas

[ns] Fw: unreasonable average end to end delay of TES video trafficmodel

-- From: anas saba717...@hotmail.com Sent: Thursday, April 02, 2009 8:44 PM To: ns ns-users@ISI.EDU Subject: [ns] unreasonable average end to end delay of TES video trafficmodel Dear NS users, when I did a simulation for video traffic

Re: [ns] Why NAM does not work for wireless simulation!

I have the same problem I have tried too much but still did not work I am using ns2.33 I am now trying to use iNSpect but still have errors Anas -- From: qute rose cynosureb...@yahoo.com Sent: Friday, April 03, 2009 8:17 AM To: ns-users@ISI.EDU

Re: [ns] Why NAM does not work for wireless simulation!

Dear Rodrigo I have tried both but it didn't work it gave me this massage cannot connect ot existing nam instance. starting new one Regards, Anas --- --- From: Rodrigo Palucci Pantoni palu...@smar.com.br Sent: Friday, April 03, 2009 2:38 PM

[ns] large delay by Mac802_11 is that right

--- 585 cbr 634 [13a 1e 19 800] --- [9:1 10:1 25 30] [17] 7 2 as it appears there is about 150 second at MAC layer what is the bug here I used NS2.33 under both Linux and sygwin all of them have the same bug please help me best regards Anas

[ns] big delay by MAC-802_11 bug

--- 585 cbr 634 [13a 1e 19 800] --- [9:1 10:1 25 30] [17] 7 2 as it appears there is about 150 second at MAC layer what is the bug here I used NS2.33 under both Linux and sygwin all of them have the same bug please help me best regards Anas

Re: [ns] how to implement overhearing by neighborhood nodes in manetprotocol( DSR )?

there is a function in the dsragent.cc called tap the purpose of this function is to overhear the transmission of the neighbors so this the input of this function always the packets that are sent by the neighbors nodes hop it will help Anas Al-Roubaiey

Re: [ns] help needed

firstly, you will name your file as the same name of the original one, ofcours you will save the original with different name, and do make take your statistics and then go back and rename yours and rename the original one to the original name and do make and take your statistics and so on,

[ns] invalide command name Agent/myUDP during using smallko Evalvid

I am working on video traffic over MANET. I downloaded the EvalVid version used for NS. In that they have created new agent called myUDP agent. I follwed all the steps given in http://hpds.ee.ncku.edu.tw/~smallko/ns2/Evalvid_in_NS2.htm when I compiled the ns again everything was fine. But

Re: [ns] invalide command name Agent/myUDP during using smallkoEvalvid

just be sure that all of them is modified and do ./confugure before make clean; make Regards, Anas Al-Roubaiey KFUPM -- From: anas saba717...@hotmail.com Sent: Saturday, May 09, 2009 8:19 AM To: ns ns-users@ISI.EDU Cc: Dr.Tarek Sheltami ta

[ns] NS results differ from platform to other

Dear NS-2 users, Do the results of NS-2 differ from one platform to other, or they are all the same? Best Regards, Anas

[ns] trace file simulation

Hi guys i found this website which finally helped me getting a good tool to convert my trace file into graph i just followed the steps and it worked

[ns] Diffusion implementation

Hi guys Through the examples of directed diffusion provided with the ns2 tutorials only ping sending are receiving are presented. however, there is no examples how the subscription should meet the publication or the opposite. if any body knows any example plz help regards anas

[ns] Urgent Help

Dear Ns2 users I have been trying to learn how to simulate wireless sensor network on NS2 using Directed Diffusion as the routing protocol but till now all the presented examples with the program deals with the ping sender and receiver without mentioning how the matching mechanism and the data

[ns] wrong node routing agent!

Hi guys i have been trying to simulate wireless sensor network on ns2.34 but it does not recognise the phenom routing protocol it keeps giving this error message wrong node routing agent! PLZ help

[ns] ns2.29, nrlsensorsim, PHENOM routing not recognised

Dear NS2 users I am trying to simulate wireless sensor network using ns2.29 with both mannasim and nrlsensorsim 2.29 i managed to get working scripts from the first one but when i try to run any example in the second using PHENOM as routing protocol i get this error msg although i followed

[ns] sensor net in ns2

Dear NS2 users I am a master student who has been struggling to simulate wireless sensor network in NS2 but still have no success i tried ns2.34 and 2.29 the main problem is about the phenom routing agent plzz if any body have any idea about how to simulate wsn in ns2 can u help

[ns] Dear Diffusion users

Hi i am trying to implement Directed diffusion in my WSN simulation and i found twoo ways of defining diffusion the first is set opt(adhocRouting) Directed_Diffusion Which is used in the simple-diffusion example While in the test-suit-wireless-diffusion the routing was defined as follows

[ns] regarding packet forwarding + WSN

had a previous experience with wsn Regards Anas

[ns] RMST source publish or start

Dear NS users i am trying to use rmst in diffusion to send my data through my wireless sensor network I have build my network but i am having problem in making the source starting to publish when i put src publish i get the following error plz help ns: _o98 publish: (_o98 cmd line 1)

[ns] Diffusion RMSt (diffagent, routing table, reinforcement messages )

With all appreciate to any reply or suggestion Regards Anas #=== # Simulation parameters setup #=== set val(chan) Channel/WirelessChannel;# channel type set val(prop) Propagation/TwoRayGround ;# radio-propagation

[ns] ns-leach extesion problems

I do not know what is wrong, and I wonder if I have to install ns-2.27, but I tried to install it but it did not work. I am grateful for your help Regards Anas - Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try

[ns] LEACH total energy consumpsion

. Regards Anas - Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

[ns] energy model variables

Hi all I am trying to acces the initial energy value after configuring the wireless node, unfortunally i did not succeed to do that. As a result I wonder anyone knows a way to do that and I will be grateful for the help Regards Anas

[ns] energy model variables

the initial energy using an if statement if {$initialEnergy 2} { DO WHATEVER} I will be grateful for your help Regards Anas - Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

[ns] counting the number of packets sent during the simulation

] 120 } { set x_coor [$node_(0) getX] set y_coor [$node_(0) getY] $node_(4) setdest $x_coor $y_coor 15.0 } However the code is working fine but it is not recognizing the condition in the if statement. I will be grateful for your help Anas

[ns] node id in c++

Hi all I am trying to get the node id in the aodv and the udpagent c++ codes. Can anyone provide my with the way to do that and I will be grateful. Regards Anas

[ns] mannasim using

Dear NS2 users I have been working on NS2.34 to simulate a wireless sensor networks with Directed Diffusion as routing protocol Can any one tell me if Mannasim is compatible with ns2.34 Regards Anas

[ns] Geographical Routing

of any kind of geographical routing? Or does anyone know if this GPSR implementation can work with 2.34 or 3.35? Best Regards, Anas

[ns] GPSR implementation running out of memory

and the memory consumption is within limits. Does anyone know were does GPSR goes wrong and consumes the memory? and is there a fix for that? Anas