On 15 sept. 2012, at 00:12, luigi scarso luigi.sca...@gmail.com wrote:
On Fri, Sep 14, 2012 at 11:50 PM, Alessandro Perucchi
alessan...@perucchi.org wrote:
On 14 Sep 2012, at 13:26, Wolfgang Schuster wolfgang.schus...@gmail.com
wrote:
There is a vertical skip missing in the MkIV
Am 14.09.2012 um 23:50 schrieb Alessandro Perucchi alessan...@perucchi.org:
And apparently the command \starttextrule ... \stoptextrule doesn't work
(this was explain in the cont-entp.pdf page 204) in either mkii mliv.
This does work for me:
\starttext
blah blah blah
Am 15.09.2012 um 00:06 schrieb Aditya Mahajan adit...@umich.edu:
Thanks for the diagnosis. What will be a good way to fix this? I think that
\expanded{\setupcounter[#1][\c!start=\ifx\p_start\empty0\else\number\p_start\fi.,...]}
should work (but I haven't tested it yet).
I would do the
Hello ConTeXist.
Is there possibility view all subsubsection number (ie in format 2.3.4 -
it mean with section and also subsection number) without \section{} and
\subsection{} command using previously?
I need to start a separate section number from a certain number
(inserted into an existing
On 15 sept. 2012, at 09:28, Wolfgang Schuster wolfgang.schus...@gmail.com
wrote:
Remove [top] from \starttextrule. All possible combinations are:
(...)
Hello Wolfgang,
Thanks, now I understand how this command works.
So probably it would be good to correct the documentation accordingly (
Hi Alessandro,
On Sat, Sep 15, 2012 at 12:00 PM, Alessandro Perucchi
alessan...@perucchi.org wrote:
So probably it would be good to correct the documentation
accordingly ( even if all coders hate that part :-D ) Or maybe
update the wiki... Is anybody able to modify the wiki? if
yes then I
Am 15.09.2012 um 11:46 schrieb Jaroslav Hajtmar hajt...@gyza.cz:
Hello ConTeXist.
Is there possibility view all subsubsection number (ie in format 2.3.4 - it
mean with section and also subsection number) without \section{} and
\subsection{} command using previously?
I need to start a
Thanx Wolfgang.
Thank you. Everything works.
While I was looking, I could not find it. I wanted to put your example
into the wiki, but the wiki shows the numbers and hidden sections, so I
did not there yet.
Thanks again
Jaroslav
Dne 15.9.2012 12:37, Wolfgang Schuster napsal(a):
Am
On Sep 15, 2012, at 1:36 AM, luigi scarso
luigi.sca...@gmail.commailto:luigi.sca...@gmail.com
wrote:
On Sat, Sep 15, 2012 at 1:23 AM, Troy Henderson
thend...@gmail.commailto:thend...@gmail.com wrote:
and which uses Cairo and Poppler for its conversion. Now in order for my
simplistic filter
Hi Jaroslav,
While I was looking, I could not find it. I wanted to put your example into
the wiki, but the wiki shows the numbers and hidden sections, so I did not
there yet.
That might be because the wiki uses mkii by default; to use mkiv write
context mode=mkiv
If you can't get an example
Whether the filter is simple or simplistic, it is odd that such a
filter has not been abundantly available before. I often wondered years
ago when I first started to understand the difference between raster and
vector graphics why something so simple (or simplistic) could not be easily
done. It
Thanx Sietse.
I wikified it! (http://wiki.contextgarden.net/Command/setuphead).
This is my first attempt :-).
I finally get to it. It's very simple.
I'll try over there now and give good advice.
Jaroslav Hajtmar
Dne 15.9.2012 14:48, Sietse Brouwer napsal(a):
Hi Jaroslav,
While I was
Hello Wolfgang,
I feel that Your solution insert some vertical space above subsubsection
text. Is it possible to get rid of it somehow?
I try \removeunwantedspaces, \blank[back] etc., but without efect.
Thanx Jaroslav
Dne 15.9.2012 16:36, Jaroslav Hajtmar napsal(a):
Thanx Sietse.
I wikified
Try \setuphead[...][placehead=empty]
Aditya
On Sat, 15 Sep 2012, Jaroslav Hajtmar wrote:
Hello Wolfgang,
I feel that Your solution insert some vertical space above subsubsection
text. Is it possible to get rid of it somehow?
I try \removeunwantedspaces, \blank[back] etc., but without efect.
Aditya, thankx,
BUT here is correction of my previous statement:
Wolfgang's solution: \setuphead [section, subsection] [placehead = hidden]
works correctly and does not insert any vertical space!!!
Unfortunately, it works in my minimal example only, but in my real
application, this option does
On Sat, 15 Sep 2012, Wolfgang Schuster wrote:
Am 15.09.2012 um 00:06 schrieb Aditya Mahajan adit...@umich.edu:
Thanks for the diagnosis. What will be a good way to fix this? I think that
\expanded{\setupcounter[#1][\c!start=\ifx\p_start\empty0\else\number\p_start\fi.,...]}
should work (but
On Wed, 12 Sep 2012, Otared Kavian wrote:
Dear Hans,
I noticed that with the latest version of mkiv (ConTeXt ver: 2012.09.10 00:57)
the command
\items[location=bottom]
does not behave as usual (in mkii the bejaviour is correct)
Minimal example:
\starttext
Thanks Aditya: I added the new syntax to the wiki.
http://wiki.contextgarden.net/Command/items
Best regards: OK
On 15 sept. 2012, at 20:10, Aditya Mahajan adit...@umich.edu wrote:
On Wed, 12 Sep 2012, Otared Kavian wrote:
Dear Hans,
I noticed that with the latest version of mkiv
I often want every math mode (between single $) be \displaystyle. In Plain
TeX, you do something like
\everymath={\displaystyle}
Is the best ConTeXt way to do something like this?
\appendtoks\displaystyle\to\everymathematics
Or is there a key in \setupmathematics?
Thanks,
Michael
19 matches
Mail list logo
