On 06/24/2011 12:39 AM, ntg-context-requ...@ntg.nl wrote:
japanese is not yet defined; we need entries in scrp-ini and scrp-cjk for
that, character categories and initializations and we need japanese
expertise for that
Japanese is supported (it?s only a few extra chars for the chinese
On 11/27/2011 11:44 PM, ntg-context-requ...@ntg.nl wrote:
Send ntg-context mailing list submissions to
ntg-context@ntg.nl
To subscribe or unsubscribe via the World Wide Web, visit
http://www.ntg.nl/mailman/listinfo/ntg-context
or, via email, send a message with subject or body
My favourite command chooses to remain anonymous for now. All it has
agreed to disclose about itself is that it gives total control over
margin notes, in particular placement page breaking...
In case an ID is required for attendance, I think I'll go for
\setCJKmainfont, representing Unicode
Could someone savant provide me with a rough overview of how to place
text in a margin these days, or else point me to a reference. (I
searched the garden without success.)
Many thanks,
Severin
___
If your question is
Great, thank you.
Just in case I missed it on the mailing list... Is there a way of
floating a margin text to the top/bottom of the page (aligning with the
top/bottom of the text area)?
Could someone savant provide me with a rough overview of how to place
text in a margin these days, or else
Is it possible to place the ruby text in a margin?
This would allow me to keep line spacing decently tight and also prevent
the reader from only reading the annotation.
How can one change the font size of the annotation and is there a way to
keep it fixed, not being scaled according to the font
I had a look at the garden reference of \setupinmargin. Trying to set
width=70mm, I get no change.
The default seems to be bold and aligned right. Changing the style
works, but trying to align inner/left also has no effect.
Any help?
Thank you,
Severin
Is it possible to place the ruby text in a margin?
No.
This would allow me to keep line spacing decently tight and also prevent
the reader from only reading the annotation.
This can be added but then you need a symbol (or something else) to see
to which word the annotation refers.
I'm
\usemodule[ruby]
\setupruby[overhang=start]
\starttext
foo \ruby{bar}{foo bar baz} baz
\stoptext
end,yes,auto all give overhang=none. Am I doing something wrong?
Severin
___
If your question is of interest to others
On 03/09/2012 04:30 PM, ntg-context-requ...@ntg.nl wrote:
Is it possible to place the ruby text in a margin?
No.
This would allow me to keep line spacing decently tight and also
prevent
the reader from only reading the annotation.
This can be added but then you need a symbol
Korean has spaces, so I guess I am only asking for CJ, but I was
wondering if it is possible to enable line breaking, i.e. cheap
hyphenation for CJ(K).
I can only speak with certainty for Japanese, but at least here the
rules are quite simple. There is no kerning for Japanese characters, so
when
I was expecting this to work:
\setuplayout[
width=10cm,
backspace=10cm,
leftmargin=8cm
]
\starttext
\inleft[stack=yes]{
\input tufte
}
\input tufte
\inleft[stack=yes]{
\input tufte
}
\stoptext
but it doesn't stack. Also, is it correct that stack=yes belongs
At the moment I have \setcjkmainfont to a Japanese font. How do I
specify more fall-back fonts, e.g. for Korean script.
Also I may need to use a different font for IPA (phonetic characters).
Is there a way of specifying a fall-back font for a particular range of
Unicode characters?
Thank you.
Not quite sure what causes this problem, but for particular text widths
in combination with \setscript[hanzi], the glyph width gets thrown off.
\setuplayout[width=110mm,height=200mm]
\usemodule[simplefonts]
\setscript[hanzi]
\setcjkmainfont[IPAexMincho]
\starttext
?? \input tufte
\stoptext
The
Is there something like ruby for vertical layout?
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
non-standard breaks as
non-stan-
dard
Is there a way to tell context to break the word at the hyphen that
already exists?
___
If your question is of interest to others as well, please add an entry to the
Wiki!
I use a Korean unfont as main fonts and an English fonts as fallback font
using the following type script file which is made by the help of Hans and
D.H. Kim.
You may set fonts similarly.
Korean fonts contained Chinese glyph(not all of them) and Japanese glyph, we
don't have any problem
Is there something like ruby for vertical layout?
For vertical typesetting you can also use ruby.
Wolfgang
OK, how do I use the vertical ruby in horizontal text?
___
If your question is of interest to others as
Is there something like ruby for vertical layout?
For vertical typesetting you can also use ruby.
Wolfgang
OK, how do I use the vertical ruby in horizontal text?
That’s not supported, you can only use horizontal ruby in horizontal text and
vertical ruby in vertical text.
Wolfgang
I
On 03/11/2012 02:58 PM, Wolfgang Schuster wrote:
Am 11.03.2012 um 10:18 schrieb S Barmeier:
Is there something like ruby for vertical layout?
For vertical typesetting you can also use ruby.
Wolfgang
OK, how do I use the vertical ruby in horizontal text?
That’s not supported, you can
much sense of it.
Severin
On 03/12/2012 01:58 PM, Hans Hagen wrote:
On 11-3-2012 15:51, S Barmeier wrote:
On 03/11/2012 07:30 PM, Hans Hagen wrote:
On 10-3-2012 21:52, S Barmeier wrote:
non-standard breaks as
non-stan-
dard
Is there a way to tell context to break the word at the hyphen
On 03/11/2012 05:24 PM, dalyoung wrote:
Dear Severin,
Try the following in the preamble.
\usetypescriptfile[your-typescript file-name]%if you save it as another file.
\usetypescript[MyIPAex]
\setupbodyfont[Myface, rm, 12pt]
I hope that it helps you.
If it doesn't work for you, then
I have leaved through the ConTeXt and MetaFun manuals on the search for
examples of graphics resembling the attached file which I created in TikZ.
I was wanting to switch to something more native to ConTeXt, but haven't
quite found a way of realising it in ConTeXt or MetaFun.
Maybe someone would
On 03/23/2012 03:11 AM, Hans Hagen wrote:
On 22-3-2012 15:09, S Barmeier wrote:
I have leaved through the ConTeXt and MetaFun manuals on the search for
examples of graphics resembling the attached file which I created in
TikZ.
I was wanting to switch to something more native to ConTeXt
I have some typescript problems.
The output says
fontstypescripts unknown: library 'mytypescript'
fontstypescripts unknown: library 'Myface'
fontspreloading latin modern fonts (third stage)
In my environment file I have
\usetypescriptfile[mytypescript]
On 03/29/2012 03:33 PM, Wolfgang Schuster wrote:
Am 28.03.2012 um 09:32 schrieb S Barmeier:
I have some typescript problems.
The output says
fontstypescripts unknown: library 'mytypescript'
fontstypescripts unknown: library 'Myface'
fontspreloading
I tried
\definefontfallback[fallback1]
\definefontfallback[fallback2]
and then
\definefontsynonym[][][fallbacks={fallback1,fallback2}]
and failed. What is the correct syntax?
Thank you,
Severin
___
If your
Hi,
I would like to include an index with Japanese terms, ordered according
to the Japanese alphabet.
I can say \index[kanji]{漢字} for an entry under K. For my Japanese
index I imagine \index[かんじ]{漢字} to place an entry under か. Is
something like this possible?
The Japanese alphabet fits (almost)
My main font is Japanese and I'm falling back on a different font for
Latin characters.
The \it switch works fine, but \em renders the Japanese font (e.g. page
numbers in the index). Is there a way to have \em use the italic (of the
fallback font)?
Thanks,
Severin
On 04/02/2012 09:18 PM, Wolfgang Schuster wrote:
Am 02.04.2012 um 11:37 schrieb S Barmeier:
My main font is Japanese and I'm falling back on a different font for
Latin characters.
The \it switch works fine, but \em renders the Japanese font (e.g. page
numbers in the index
On 04/08/2012 12:03 AM, Hans Hagen wrote:
On 2-4-2012 11:01, S Barmeier wrote:
Hi,
I would like to include an index with Japanese terms, ordered according
to the Japanese alphabet.
I can say \index[kanji]{漢字} for an entry under K. For my Japanese
index I imagine \index[かんじ]{漢字} to place
On 04/15/2012 07:44 AM, Aaron W. Hsu wrote:
Hey All:
I am very new to ConTeXt, but I am trying to use it to achieve a format
similar to what you can get from WEB systems. Right now I am working on
the definitions of chunks and their cross references. I have three main
macros:
\defchunk
On 04/22/2012 04:16 PM, Yue Wang wrote:
Dear powerful ConTeXt users:
Is there some way to do tufte style side notes? I googled and did
found Wolfgang's solution
(http://archive.contextgarden.net/message/20110906.202722.f501f115.en.html)
but it's just too simple and cannot be used for
Leaving out the plural in \setupregister gives you the setup you set up.
\defineregister[Note][Notes]
\setupregister[Note][n=2,pagestyle=small,textstyle=normal]
\defineregister[Text][Texts]
\setupregister[Text][n=2,textstyle=normal,pagestyle=normal]
\defineregister[Music][Musics]
On 04/26/2012 10:14 PM, Alan BRASLAU wrote:
On Thu, 26 Apr 2012 19:18:55 +0900
S Barmeier severinbarme...@googlemail.com wrote:
\defineregister[Music][Musics]
Musics?
Alan
Hey, that wasn't me... It was like that when I got
After updating to ubuntu 12.04, my shouts of joy were smothered by the
following
!LuaTeX error: cannot find OpenType font file for reading ()
== Fatal error occurred, no output PDF file produced!
mtx-context | fatal error: return code: 70
I ran mtxrun --script fonts --reload, updated to
wrote:
On Sat, 2012-04-28 at 13:25 +0900, S Barmeier wrote:
After updating to ubuntu 12.04, my shouts of joy were smothered
by the following
!LuaTeX error: cannot find OpenType font file for reading () ==
Fatal error occurred, no output PDF file produced!
Fuuck...and here I was planning
I am writing documents in English/Japanese.
If you want to include English text, you probably need to define your
own typescript (or use simplefonts), because most Japanese fonts have
terrible Latin fonts...
I can probably help you, if you tell me what exactly you need.
If you're just
Depending on your needs, p(La)TeX may be a quicker solution, if you can
afford to miss out on the benefits of ConTeXt. But that's just my opinion...
On 05/07/2012 10:17 PM, KUROKI Yusuke wrote:
Hello, Henman,
What the timing you choose to post this message!
Several days ago, I, Japanese,
... /
fontsbodyfont 42pt is defined (can better be done global)
fontsbodyfont 50.4pt is defined (can better be done global)
fontsbodyfont 40.32pt is defined (can better be done global)
I guess this has to do with my path variables, but having context
minimals installed prevents pdfcrop from running successfully:
PDFCROP 1.33, 2012/02/01 - Copyright (c) 2002-2012 by Heiko Oberdiek.
kpathsea: Running mktexfmt pdftex.fmt
/usr/local/texlive/2010/bin/x86_64-linux/mktexfmt: 395:
On 06/18/2012 07:47 PM, Vladimir Lomov wrote:
Hello,
** S Barmeier [2012-06-18 15:38:20 +0900]:
I guess this has to do with my path variables, but having context
minimals installed prevents pdfcrop from running successfully:
PDFCROP 1.33, 2012/02/01 - Copyright (c) 2002-2012 by Heiko
On 06/21/2012 09:32 AM, Aditya Mahajan wrote:
On Thu, 21 Jun 2012, S Barmeier wrote:
On 06/18/2012 07:47 PM, Vladimir Lomov wrote:
Hello,
** S Barmeier [2012-06-18 15:38:20 +0900]:
I guess this has to do with my path variables, but having context
minimals installed prevents pdfcrop from
On 06/22/2012 06:23 PM, Martin Fechner wrote:
Hey list,
does anybody know an useable font for sanskrit writings another then
sanskrit2003.ttf? It is preferred to have the same range (with ligatures
etc.) as the sanskrit2003.ttf.
Best regards,
Martin
It is hard to imagine that there is
On 06/22/2012 07:27 PM, Martin Fechner wrote:
Am 22.06.2012 12:05, schrieb S Barmeier:
On 06/22/2012 06:23 PM, Martin Fechner wrote:
Hey list,
does anybody know an useable font for sanskrit writings another then
sanskrit2003.ttf? It is preferred to have the same range (with ligatures
etc
You can \setup what you \define|d yourself and \setup what is
pre\define|d, but not \setup something that is not \define|d.
Maybe ;)
Severin
On 07/26/2012 12:18 PM, Bill Meahan wrote:
I'm confused again. :\
When do you use a \defineSOMETHING instead of \setupSOMETHING ?
Must something be
On 09/17/2012 07:11 PM, Pavel Dohnal wrote:
Hello,
I am creating script which generates context source from database
data. Then converts context to pdf and sends it to user. Problem is
that users enter international texts into database and some characters
are not present in final pdf.
Here
If you are not using all predefined font styles, you could set your
monospace, sans, serif, or whichever style you aren't using to the
font you want to use and use the predefined command (e.g. \sf) to
access that font.
Severin
On 6/13/13, Sander Maijers s.n.maij...@student.ru.nl wrote:
On
, although
it, too, should not go unnoticed during compilation. Could this be
because of the space in the font name?
I'm grateful for any sort of answer.
Again, many thanks.
Severin
On 9/12/10, Wolfgang Schuster schuster.wolfg...@googlemail.com wrote:
Am 09.09.2010 um 10:21 schrieb S Barmeier
The simplefonts message ignores spaces and caps... Any ideas?
Thank you.
Severin
On 9/14/10, Wolfgang Schuster schuster.wolfg...@googlemail.com wrote:
Am 14.09.2010 um 02:28 schrieb S Barmeier:
Thank you all for your detailed answers. Wolfgang's suggestion does
not produce any errors and seems like
:
Am 14.09.2010 um 11:10 schrieb S Barmeier:
Thank you for your quick reply. In the above example neither IPAMincho
nor Sazanami Mincho (Regular) are loaded correctly. I get several
lines of
simplefonts : font 'sazanamiminchoregular' not found
interspersed with
! fonts : font
Dear CJK experts,
I am looking to add furigana (readings) above the Kanji (Chinese characters)
in a Japanese text.
In XeTeX I'd be used to something translating to
\usemodule[simplefonts]
\usemodule[ruby]
\starttext
\ruby{今日}{こんにち}は
\stoptext
What would be the correct command for mkiv?
Many
Thank you, it's almost working. I am making use of projects, products,
environments and components.
My \usemodule[ruby] sits in my environment file, but I'm using the \ruby
command down in the component file. The environment is only called in
the project file, but the component links back to the
Sorry to keep going on about this, but trying to load the
project/environment with either of
\project myproject
\environment myenvironment
in the component (directly after \startcomponent) gives me an error. It
compiles fine without these commands, but then the \ruby command does
not work. What
On 10/20/2010 09:30 AM, Hans Hagen wrote:
On 20-10-2010 6:25, S Barmeier wrote:
Sorry to keep going on about this, but trying to load the
project/environment with either of
\project myproject
\environment myenvironment
in the component (directly after \startcomponent) gives me an error
On 10/20/2010 02:12 PM, ntg-context-requ...@ntg.nl wrote:
Sorry to keep going on about this, but trying to load the
project/environment with either of
\project myproject
\environment myenvironment
in the component (directly after \startcomponent) gives me an error. It
compiles
Well, I resolved the ruby issue. After playing around with a minimal
example, I noticed that \usemodule[tikz] was causing all the trouble
when trying to load the environment. Not knowing what was wrong I've now
updated to texlive '10 and everything works as expected, including tikz.
Thank you for
Dear all,
I don't know how you all compile your context documents. I have used
Winefish until now, but it is no longer maintained (last stable version
2006) and so I was thinking of switching to something else. I have
looked at vim and it looks promising. There is a compiler file from
Aditya
Hello,
I tried to follow the PRAGMA document for setting up SciTE to run with
ConTeXt. The Tools menu seems to recognize that I am trying to process
a ConTeXt file and the syntax highlighting seems to fit as well.
However, when trying to Compile or Build, SciTE tells me
mtxrun --autogenerate
I don't know if anyone feels the same, but I'm not happy with the
spacing of commas in math mode (pictures attached). For instance,
typesetting H^1(X,F), the comma seems to be closer to the F than to the
X. Equal spacing on both sides or setting the comma closer to the X are
I guess a matter of
The spacing for numbered and unnumbered equations is different:
\input tufte
\placeformula[-]
\startformula
a=b
\stopformula
\input tufte
\placeformula
\startformula
a=b
\stopformula
\input tufte
\placeformula[-] seems to insert extra space after the displayed
equation. Removable feature?
Thank
I was wondering if there are any kind of spaces which (partly) fix the
spacing between characters. For example, typesetting Chapter 1, I
would like to keep the space from stretching at the same rate as the
surrounding spaces (just like ck ligatures in old German texts would be
prevented from
Currently I am using something like
\defineenumeration[lemma]
[location=serried,
headstyle=bold,
text=Lemma,
width=broad,
style=italic]
to define theorems, lemmas, etc.
Sometimes a theorem or lemma will have its own name (e.g. Yoneda Lemma),
and I find it slightly cumbersome
Thank you for the quick reply, it is getting quite close. I guess the
trick is to define an enumeration for one-off use and use title= to
fake text=. The only problem is that the number sits between text and
title. So to still be able to use \starttheorem alongside
\startproclaim{Theorem}, I would
With the current solution, I still have the problem that the numbers of
\starttheorem and \startproclaim{Theorem} are on the (resp.) left and
right side of the text/title and I don't know how to change that.
I still find \starttheorem[text={Special Theorem}] (and that is called
key-val-input?)
Hi,
please consider this:
\starttext
\math{flow_1}
\stoptext
When compiled with MkIV, space between f and l is quite big and doesn't
look very good. Is it a bug?
Spacing between letters when treated as individual variables is always a
bit fishy. In this case the math mode
Hi,
After updating my system to ubuntu 11.04, all sorts of access
permissions seem to have changed. In particular, when compiling any
ConTeXt document, I get
oad otf loading:
/usr/local/texlive/2010/texmf-dist/fonts/opentype/public/lm/lmmono8-regular.otf
(hash: lmmono8-regular)
load otf
frequently, but the ConTeXt version is from July 2010.
Is there any savvy way to update to a newer release of ConTeXt without
meddling too much with the existing texlive installation?
On 05/08/2011 08:26 PM, Taco Hoekwater wrote:
On 05/07/2011 02:49 PM, S Barmeier wrote:
Hi,
After updating my
I am trying to compile a 2-year-old mkiv document with the latest beta
and am getting an error on the line
\inleft[style=bold,stack=continue]
Two years ago, stacking of margin notes was still experimental, so I'm
guessing something has changed since then. What is the correct way these
days to
69 matches
Mail list logo