define the ‘figure’ counter, that
> works!
>
>
> Second, it seems that \setupenumerations does not modify the counter of an
> explicit defined enumeration, so you need to use the explicit
> \setupenumeration[enumeration] form. This may be intentional, I do not know
> for sure.
>
>
>
or …
For the singular explicit \setupcaption[figure], I think this is a bug.
The solution I found is to blatantly redefine the ‘figure’ counter, that works!
Second, it seems that \setupenumerations does not modify the counter of an
explicit defined enumeration, so you need to use the explicit
…) to be numbered consecutively prefixed by the chapter and section number,
> so 1.1.1, 1.1.2, 1.2.1, ...
>
> I’ve managed to change figure/table captions to do this by:
>
> \setupcaptions[
> way=bysection,
> prefixsegments=chapter:section,
> ]
>
> And I’ve
figure/table captions to do this by:
\setupcaptions[
way=bysection,
prefixsegments=chapter:section,
]
And I’ve setup my enumerations by:
\setupenumerations[
way=bysection,
prefix=yes,
prefixsegments=chapter:section,
]
But how do I use the same counter for figures, tables, and all
={R},
align={flushleft,broad},
commandbefore={\space\endash\space}]
\setuphead
[subsection]
[sectionsegments=subsection,
conversion={n},
style=\bfb,
align={flushleft,broad}]
\setupenumerations
[before={\blank},
after={\blank},
alternative=serried,
title=yes
ble
> \stopplacetable
>
> Best regards: Otared
>
>
> On 14 Jul 2020, at 11:28, Fabrice Couvreur
> wrote:
>
> Hello,
> In my lessons, I often have to include tables, figures, ... in
> definitions, theorems ...
> With the context engine it works fine but not with lmtx.
; In my lessons, I often have to include tables, figures, ... in definitions,
> theorems ...
> With the context engine it works fine but not with lmtx.
> Thanks for your help.
> Fabrice
>
> \setupenumerations
> [before={\blank},
>after={\blank},
>alternati
Hello,
In my lessons, I often have to include tables, figures, ... in definitions,
theorems ...
With the context engine it works fine but not with lmtx.
Thanks for your help.
Fabrice
\setupenumerations
[before={\blank},
after={\blank},
alternative=serried,
title=yes,
titleleft
=\Title]
\setupenumerations
[before={\blank},
after={\blank},
alternative=serried,
title=yes,
prefix=yes,
prefixsegments=chapter,
way=bychapter,
titlestyle=bold,
width=broad]
\defineenumeration
[definition]
[text=Définition,
number=yes,
headcommand
] [] [n]
\setupenumerations
[before={\blank},
after={\blank},
alternative=serried,
title=yes,
distance=1em,
%headcommand=\groupedcommand{}{~---~},
distance=none,
prefix=yes,
prefixsegments=chapter,
way=bychapter,
prefixconversionset=digit,
titlestyle=bold,
width
Hello,
Perhaps the key proposed by Wolfgang is what I want to do : put a dash
between the numbering and the text
\setupenumerations[
before={\blank},
after={\blank},
text=Théorème ,
alternative=serried,
headstyle={\sc},
prefix=yes,
prefixsegments
after theorem head; " " = normal interword space
{\thmname{#1}\thmnumber{ #2}\thmnote{ (#3)}}
\theoremstyle{theoremdd}
\newtheorem{thmd}{Theorem}[section]
I'm trying to do the same thing with ConTeXt but I can not do it completely
:
What are you missing?
Aditya
\setupen
interword space
{\thmname{#1}\thmnumber{ #2}\thmnote{ (#3)}}
\theoremstyle{theoremdd}
\newtheorem{thmd}{Theorem}[section]
I'm trying to do the same thing with ConTeXt but I can not do it completely
:
\setupenumerations[
before={\blank},
after={\blank},
tex
ice Couvreur wrote:
> > Hello,
> > I would like the numbering of the properties to be like this :
> > [...]
> > I thought it was enough to use the key way = bychapter
>
> Hi Fabrice,
>
> "way=bychapter" resets numbering in each chapter.
>
> You
On 07/23/2018 05:11 PM, Fabrice Couvreur wrote:
> Hello,
> I would like the numbering of the properties to be like this :
> [...]
> I thought it was enough to use the key way = bychapter
Hi Fabrice,
"way=bychapter" resets numbering in each chapter.
You need thi
}}
\setupenumerations[
text=Propriété ,
title=no,
way=bychapter,
titlestyle=bold,
style=slanted,
width=fit,
headcommand=\ProprieteHeadcommand,
numbercommand=\groupedcommand{}{\nbsp},
after=\textrule
]
\defineenumeration[propriete]
\starttext
gt; ####
>>
>> Thank you
>> Fabrice
>>
>> %
>>
>> \definestructureconversionset
>> [structure]
>> [numbers, Romannumerals, numbers, numbers, numbers]
>> [numbers]
>>
>> \setuph
gt; [structure]
> [numbers, Romannumerals, numbers, numbers, numbers]
> [numbers]
>
> \setupheads [sectionconversionset=structure]
>
> \setupenumerations
> [
> before={\blank[big]},
> after={\blank[big]},
> alternative=serried,
> width=broad,
>
, Romannumerals, numbers, numbers, numbers]
[numbers]
\setupheads [sectionconversionset=structure]
\setupenumerations
[
before={\blank[big]},
after={\blank[big]},
alternative=serried,
width=broad,
distance=0.5em,
headstyle=bold,
titlestyle=bold,
prefix=chapter,
way=bychapter,
conversion=numbers
gt; \setupexternalfigures[location=default]
>> \setupenumerations[
>> alternative=left,
>> text=Theorem,
>> title=no,
>> stopper={:},
>> distance=0ex,
>> width=fit,
>> right={~},
>> style=normal,
>>
On 4 Sep 2016, at 19:37, Florian Leupold <fleup...@posteo.net> wrote:
>>
>> Dear list,
>>
>> I am trying to use enumerations with MKIV I am a bit at a loss when it comes
>> to the documentation (see below for a few issues).
>>
>> Working on a concrete exam
Florian Leupold <mailto:fleup...@posteo.net>
4. September 2016 um 19:37
Issues with the documentation:
- In “ConTeXt Commands”, it says on page 224 that \setupenumeration
inherits from \setupcounter; but in “ConTEXt reference manual", it
says on page 246 that \setupenumerations in
ty close to what I want for my
> enumeration ‘theorem’:
>
> \setupexternalfigures[location=default]
> \setupenumerations[
> alternative=left,
> text=Theorem,
> headstyle=bold,
> title=no,
> way=bychapter,
> stopper={:},
&
]
\setupenumerations[
alternative=left,
text=Theorem,
headstyle=bold,
title=no,
way=bychapter,
stopper={:},
distance=1ex,
width=fit,
style=normal,
hang=fit]
\defineenumeration[theorem]
\starttext
\chapter{First chapter}
\starttheorem
A general question. I use setupenumerations to define theorem-,
lemma-, and definition-environments for my document. I realised that
setupenumerations is overwriting keys that are set in setupitemize
(and groups defined by defineitemgroup).
~~~snip~~~
\setupenumerations [numberconversion
Am 20.02.2014 um 14:45 schrieb Thomas Möbius kont...@thomasmoebius.de:
A general question. I use setupenumerations to define theorem-,
lemma-, and definition-environments for my document. I realised that
setupenumerations is overwriting keys that are set in setupitemize
(and groups defined
2014-02-20 14:52 GMT+01:00 Wolfgang Schuster schuster.wolfg...@gmail.com:
Am 20.02.2014 um 14:45 schrieb Thomas Möbius kont...@thomasmoebius.de:
A general question. I use setupenumerations to define theorem-,
lemma-, and definition-environments for my document. I realised
compiled with 'texexec'.
When compiled with 'context', the chapter number is missing in the
numbering of theorems. Lemmas are not numbered at all.
~~~snip~~~
\setupenumerations
[title=yes,
style=normal,
list=all,
before={\blank[big]},
after={\blank[big]},
location=serried
', the chapter number is missing in the
numbering of theorems. Lemmas are not numbered at all.
~~~snip~~~
\setupenumerations
[title=yes,
style=normal,
list=all,
before={\blank[big]},
after={\blank[big]},
location=serried,
Change “location=serried” to “alternative=serried
missing. Question: How do I get
the same output when compiling the following code with 'context' as
when compiled with 'texexec'.
When compiled with 'context', the chapter number is missing in the
numbering of theorems. Lemmas are not numbered at all.
~~~snip~~~
\setupenumerations
[title=yes
of theorems. Lemmas are not numbered at all.
~~~snip~~~
\setupenumerations
[title=yes,
style=normal,
list=all,
before={\blank[big]},
after={\blank[big]},
location=serried,
Change “location=serried” to “alternative=serried”.
width=broad,
distance=0.5em,
headstyle=bold
number, and there is an additional line break after each
theorem title.
~~~ snip ~~~
\setupcolors[state=start]
\setupframedtexts
[width=\makeupwidth,
frame=off,
bottomframe=on,
topframe=on,
background=screen,
backgroundscreen=.95]
\setupenumerations
[title=yes,
style
=on,
background=screen,
backgroundscreen=.95]
\setupenumerations
[title=yes,
style=normal,
list=all,
before={\blank[big]},
after={\blank[big]},
location=serried,
width=broad,
distance=0.5em,
headstyle=bold,
titlestyle=bold,
way=bychapter
On 4 avr. 2013, at 23:13, Hans Hagen pra...@wxs.nl wrote:
[…]
\defineenumeration[test]
\setupenumeration[test][way=bysection]
^
This should rather be
\setupenumerations[test][way=bysection]
Best regards: OK
\starttext
\startsection[title=one
Am 05.04.2013 um 11:31 schrieb Otared Kavian ota...@gmail.com:
On 4 avr. 2013, at 23:13, Hans Hagen pra...@wxs.nl wrote:
[…]
\defineenumeration[test]
\setupenumeration[test][way=bysection]
^
This should rather be
\setupenumerations[test][way
]
^
This should rather be
\setupenumerations[test][way=bysection]
No, \setupenumeration is the correct command for MkIV, the plural form
\setupenumerations is only a synonym and was added for backwards
compatibility.
Thanks Wolfgang, of course you are right and somehow I
Hi Tobias,
When I try to use \setupenumerations in the latest beta
(2013.03.22 12:06) for multiple enumerations, the
alternative=... is ignored for all but the first enumeration.
It's not just the enumeration; e.g. the color key, too is applied to
only to the first enumeration class named.
I
Am 26.03.2013 um 12:52 schrieb Sietse Brouwer sbbrou...@gmail.com:
Hi Tobias,
When I try to use \setupenumerations in the latest beta
(2013.03.22 12:06) for multiple enumerations, the
alternative=... is ignored for all but the first enumeration.
It's not just the enumeration; e.g
Hi Sietse, Wolfgang,
Thanks for your replies!
Indeed, I do not have a reference to some manual. However, there is this
old thread http://www.ntg.nl/pipermail/ntg-context/2010/046090.html and reading
\setupenumerations in plural form, I just supposed that it should work for
multiple enumerations
Hi list,
While learning the very basics of context, I stumbled upon the following
bug:
When I try to use \setupenumerations in the latest beta (2013.03.22 12:06)
for multiple enumerations, the alternative=... is ignored for all but the
first enumeration.
A minimal example demonstrating what I
=1sp,#1]
\let\doitem\item
\def\item{\doitem[]\hbox{}\kern12pt\rightskip=0pt}%
}
\def\stopouteritemize{\stopitemize\endgroup}
\setupenumerations [indentnext=no]
\setupdescriptions [indentnext=no]
\unexpanded\def\smalltyping{%
\switchtobodyfont[tt]%
\parindent=0pt
}
% typing
Dear Wolfgang,
To use the option title=yes in enumeration, I have encountered a unwanted
result.
It display the first letter as a title when I didn't put title.
Would you please check the following code?
\setupenumerations[location=serried,width=broad,distance=0.5em]
\defineenumeration[theorem
example
\setupenumerations[location=serried,width=broad,distance=0.5em]
\defineenumeration[theorem][text=Satz,title=yes]
\defineenumeration[corollary][number=theorem,text=Korollar]
\starttext
\starttheorem[title={Pythagoras Theorem}]
The square on the hypotenuse is equal to the sum
][][]
\definestructureconversionset[footnote][numbers,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
Use \setupnotation[footnote][…].
Right, thank you!
The new footnote structure seems to tidy up and settle things neatly in
\setupnote and \setupnotation.
(eg
Hi,
are subfootnotes not yet rewritten, or did the syntax change?
The following example expects 2.a but gives 2.1:
\definestructureseparatorset [footnote][][]
\definestructureconversionset[footnote][numbers,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote
]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
Use \setupnotation[footnote][…].
Wolfgang
___
If your question is of interest to others as well, please add an entry to the
Wiki
with...
\defineenumeration[article]
[location=top,
text=Article,
between=\blank,
before=\blank,
after=\blank]
\setupenumerations[article][R]
...but the problem is that after a list of items provided with matching
\startarticle \stoparticle pairs, the last count persists to the next
the behaviour with...
\defineenumeration[article]
[location=top,
text=Article,
between=\blank,
before=\blank,
after=\blank]
\setupenumerations[article][R]
...but the problem is that after a list of items provided with matching
\startarticle \stoparticle pairs, the last count persists
]
\setupenumerations[article][R]
...but the problem is that after a list of items provided with matching
\startarticle \stoparticle pairs, the last count persists to the next
list of items which should start at 'I' again. I am assuming I am not
doing this correctly and would appreciate any suggestions
,
before=\blank,
after=\blank]
\setupenumerations[article][R]
...but the problem is that after a list of items provided with matching
\startarticle \stoparticle pairs, the last count persists to the next
list of items which should start at 'I' again. I am assuming I am not
doing this correctly
,
Steffen
---
% concering subfootnote
\definestructureseparatorset [footnote][][]
\definestructureconversionset[footnote][numbers,characters][numbers] % - ???
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
% footnote's rule
\unexpanded\def\MyRule
] % - ???
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
% footnote's rule
\unexpanded\def\MyRule{\startcolor[orange]\vrule width18mm
height0.4pt\vskip2mm\stopcolor}
% footnote's interlineskip etc.
\startsetups footnotesetup
\setupinterlinespace[line=9.8pt, height=.79
)
%
% MINIMAL EXAMPLE
%
\setupenumerations%
[%
alternative=hanging,%
width=broad,%
headstyle=bold,%
titlestyle=bold,%
]%
\defineenumeration[mydefinition]%
[text=Definition,%
style=italic,%
title=yes,%
listtext={Definition }%
]%
\starttext
% LuaTeX, Version beta-0.70.1-2011051908 (rev 4277)
%
% MINIMAL EXAMPLE
%
\setupenumerations%
[%
alternative=hanging,%
width=broad,%
headstyle=bold,%
titlestyle=bold,%
]%
\defineenumeration[mydefinition]%
[text=Definition,%
style
the “alternative” key for the position of
the title.
This is one of the things that I'm still considering ... alternative is
more consistent with other mechanisms. Also, notes use location for
where notes are placed.
We can consider some compatibility hack:
\setupenumerations
[\c!alternative
, but not if invoked from headcommand.
(untested) descriptions use titlecommand rather than headcommand.
Thanks, Aditya, for your reply.
I'm afraid it doesn't work.
According to https://bitbucket.org/wolfs/commands, \setupdescriptions
uses headcommand and \setupenumerations uses titlecommand
}]
\setupenumerations[Lecture][number=yes]
% \setupenumerations[Lecture][numbering=reverse] % this has no effect though…
\starttext
\startLecture Tuesday December 6th: Banach spaces.
\startitemize[n]
\item First subject.
\item Second subject.
\stopitemize
\stopLecture
\startLecture Tuesday November 29th
}]
\setupenumerations[Lecture][number=yes]
% \setupenumerations[Lecture][numbering=reverse] % this has no effect though…
\starttext
\startLecture Tuesday December 6th: Banach spaces.
\startitemize[n]
\item First subject.
\item Second subject.
\stopitemize
\stopLecture
\startLecture Tuesday November 29th
\definestructureconversionset[footnote][empty]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
test\footnote{only this} text
\stop
\stoptext
... but a short command like \footnote[-]{...} would be more handy in
practice.
Is there no successor
Sure, one can use a construct like this ...
\starttext
\chapter{a}
\section{b}
\start
\definestructureconversionset[footnote][empty]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
test\footnote{only this} text
\stop
\stoptext
... but a short command
of how to do this?
You can change the style, color and spacing with \setupenumerations
but for the rules etc. you need other commands.
\defineenumeration[theorem][text=Theorem,title=yes]
\defineenumeration[example][text=Example]
\defineenumeration[remark] [text=Remark]
\setupenumerations
still nowhere near the solution.
Could anyone please give examples of how to do this?
You can change the style, color and spacing with \setupenumerations
but for the rules etc. you need other commands.
\defineenumeration[theorem][text=Theorem,title=yes]
\defineenumeration[example][text=Example
Thank you. I wanted to add this to the wiki, but now I'm not sure how
the mentioned commands relate to each other. So I guess
\setupenumerations inherits all keys (among them number and
numberconversion) from \setupnumber? Unfortunatly there's no
reference page for \setupnumber on the wiki
Am 22.06.2011 um 22:03 schrieb Stefan Müller:Thank you. I wanted to add this to the wiki, but now I'm not sure how the mentioned commands relate to each other. So I guess \setupenumerations inherits all keys (among them "number" and "numberconversion") from \setupnumber?
On 22.06.2011 22:14, Wolfgang Schuster wrote:
Am 22.06.2011 um 22:03 schrieb Stefan Müller:
Thank you. I wanted to add this to the wiki, but now I'm not sure how
the mentioned commands relate to each other. So I guess
\setupenumerations inherits all keys (among them number
={\stoptextbackground}]
Putting
this before the above \start/stopdialogue snippet (suitably enclosed in
\start/stoptext) gives me an error about a missing }; I suppose I'm
overlooking something.
An enumeration-based solution would be along these lines:
\defineenumeration
[chat]
\setupenumerations
[chat
in Plain-teX
%% but has disappeared from ConTeXt
%% the following is adapted for mkiv
\defineenumeration[theorem]
\setupenumerations[theorem]
[text=Theorem,
style=sc, % or slanted
title=yes,
titleleft=,
titleright={.},
location=serried,
width=fit
solution here is one which use the annotation
module (local replacement of the enumeration text doesn’t work because
\setupenumerations resets the counter):
\usemodule[annotation]
% solution 1
%\defineenumeration
% [thelemma]
% [ location=serried,
%text=Lemma,
% width=broad
(local replacement of the enumeration text doesn?t work because
\setupenumerations resets the counter):
\usemodule[annotation]
___
If your question is of interest to others as well, please add an entry to the
Wiki
]”
and “{title}”.
Besides the already presented solution here is one which use the annotation
module (local replacement of the enumeration text doesn’t work because
\setupenumerations resets the counter):
\usemodule[annotation]
A very useful module to have! But how is it different from enumerations
Friends,
todays current beta (20110211) writes number in front of the actual footnote
number!
Please run example below:
\definestructureseparatorset [footnote][][]
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote
Am 07.10.2010 um 10:36 schrieb Hans Hagen:
\definestructureseparatorset [footnote][][]
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
\setupfootnotes[way=bytext]%- here
Hi!
I want to have the following (Theorems and Lemmas share the counter,
way=bysection):
Section 1. Foo
Theorem 1.1 Bar
Lemma 1.2 Baz
Section 2. Foo
Theorem 2.1 Bar
Lemma 2.2 Baz
The following used to work about a month or two ago.
\setupenumerations[way=bysection]
\newcounter\theorems
Am 25.11.2010 um 09:54 schrieb Yury G. Kudryashov:
The following used to work about a month or two ago.
\setupenumerations[way=bysection]
\newcounter\theorems
\defineenumeration[thm]
[text=Theorem,prefix=yes,prefixsegments=section,counter=theorems]
\defineenumeration[lem]
[text=Lemma
Wolfgang Schuster wrote:
Am 25.11.2010 um 09:54 schrieb Yury G. Kudryashov:
The following used to work about a month or two ago.
\setupenumerations[way=bysection]
\newcounter\theorems
\defineenumeration[thm]
[text=Theorem,prefix=yes,prefixsegments=section,counter=theorems
an issues with number of formula in latest beta (MkIV)
example：
\setupenumerations
[formula]
[way=bysection,
prefix=yes,
prefixsegments=chapter:section]
\starttext
\chapter{one}
\section{one}
See formula \in[eq:3]
\section{two}
\placeformula[eq:3]
\startformula
f(x)=x^3
, I would like to contribute to the wiki or whatever is
the main documentation source of the ConTeXt project something to
document those parameters that are specific de \setupenumerations. The
context reference manual and the wiki both just refer to
\setupdescriptions yet there are a number
Wow, thank you very much for your fix, Wolfgang! I can confirm that it
works. I hope this fix makes it into the next beta?
Abount documenting these extra parameters that \setupenumerations has
over \setupdefinitions, I figure that I should contribute that to the
wiki. But I wonder, how does
\setupenumerations. The
context reference manual and the wiki both just refer to
\setupdescriptions yet there are a number of parameters that don't
exist for \setupdescriptions, such as number, counter, prefix,
prefixcomponents, etc.
Adding the missing options to the wiki is a good start. Currently
\definestructureseparatorset [footnote][][]
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
\setupfootnotes[way=bytext]%- here is the problem!!
\starttext
test \footnote{}
text
Schuster wrote:
\definestructureseparatorset [footnote][][]
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorse
t=footnote]
Nice to discover subfootnotes!
The above example illustrates a *spacing problem
On Thursday 30 September 2010 20:42:39 Wolfgang Schuster wrote:
\definestructureseparatorset [footnote][][]
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset=footnote]
Nice to discover subfootnotes
subnote \stopsubfootnote
text
\stoptext
On Thursday 30 September 2010 20:42:39 Wolfgang Schuster wrote:
\definestructureseparatorset [footnote][][]
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote,numberseparatorset
Hi,
how do I change the numbering of subfootnote from eg. 2.1 to 2a?
See minimal example, please:
\setupenumerations[subfootnote][conversion=a] % ?
\setupsubfootnotes[conversion=a] % ?
\starttext
test \footnote{} \subfootnote{}
text
test \startfootnote note \stopfootnote
test
Untested, but the usual option is conversion=characters
Aditya
On Sep 30, 2010, at 8:03 AM, Steffen Wolfrum cont...@st.estfiles.de wrote:
Hi,
how do I change the numbering of subfootnote from eg. 2.1 to 2a?
See minimal example, please:
\setupenumerations[subfootnote][conversion
Am 30.09.2010 um 14:03 schrieb Steffen Wolfrum:
Hi,
how do I change the numbering of subfootnote from eg. 2.1 to 2a?
See minimal example, please:
\setupenumerations[subfootnote][conversion=a] % ?
\setupsubfootnotes[conversion=a] % ?
numberconversion=...
Wolfgang
Am 30.09.2010 um 18:28 schrieb Wolfgang Schuster:
Am 30.09.2010 um 14:03 schrieb Steffen Wolfrum:
Hi,
how do I change the numbering of subfootnote from eg. 2.1 to 2a?
See minimal example, please:
\setupenumerations[subfootnote][conversion=a] % ?
\setupsubfootnotes[conversion
Am 30.09.2010 um 18:53 schrieb Steffen Wolfrum:
Am 30.09.2010 um 18:28 schrieb Wolfgang Schuster:
Am 30.09.2010 um 14:03 schrieb Steffen Wolfrum:
Hi,
how do I change the numbering of subfootnote from eg. 2.1 to 2a?
See minimal example, please:
\setupenumerations[subfootnote
minimal example, please:
\setupenumerations[subfootnote][conversion=a] % ?
\setupsubfootnotes[conversion=a] % ?
numberconversion=...
No, not yet.
Now the result is 1, 2 and b.a ... but it should be 2a
\definestructureconversionset[footnote][number,characters][numbers
Am 30.09.2010 um 20:31 schrieb Steffen Wolfrum:
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote]
Again, not yet!
Please run the test file: now we have 2.a ... instead of 2a.
\definestructureseparatorset
Am 30.09.2010 um 20:42 schrieb Wolfgang Schuster:
Am 30.09.2010 um 20:31 schrieb Steffen Wolfrum:
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote]
Again, not yet!
Please run the test file: now we have 2
On 30-9-2010 8:42, Wolfgang Schuster wrote:
Am 30.09.2010 um 20:31 schrieb Steffen Wolfrum:
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote]
Again, not yet!
Please run the test file: now we have 2.a ... instead
On 30-9-2010 8:57, Steffen Wolfrum wrote:
Am 30.09.2010 um 20:42 schrieb Wolfgang Schuster:
Am 30.09.2010 um 20:31 schrieb Steffen Wolfrum:
\definestructureconversionset[footnote][number,characters][numbers]
\setupenumerations[footnote][numberconversionset=footnote]
Again, not yet
Am 31.08.2010 um 21:21 schrieb Géry Ogam:
Hi,
How can I indent text within framedtext environments?
I'm asking because my definitions/theorems/etc. commands are surrounded by
startframed/stopframed and I want the text inside to be
indented.
\setupenumerations[...][indenting=yes
]
\defineenumeration[test][location=right,align=flushright]
\showframe
\starttext
\vbox
{\starttest bla\stoptest
\starttest blablabla\stoptest
\starttest \input knuth \stoptest}
\setupenumerations[hang=margin]
\vbox
{\starttest bla\stoptest
\starttest blablabla\stoptest
in exactly this particular context.
A nice trick i found in the core (typo-cap.mkiv)
\def\sc{\setfontfeature{smallcaps}} % \addff{smallcaps}?
\definefontfeature [default] [default] [mode=node,onum=yes]
\definefontfeature [smallcaps] [default] [smcp=yes]
\setupenumerations[footnote][before=\char\zerocount
Sebastien Mengin:
Sorry, a bit off topic, but: is \setupfootnotes[] a synonym for
\setupnote[footnote][] ?
Besides
\setupfootnotes[]
and
\setupnote[footnote][]
there are:
\setupenumerations[footnote][]
and
\setupfootnotedefinition[]
and maybe more.
I have no idea how they are related or even
by
\setupenumerations[footnote]
[before=\vbox\bgroup, after=\egroup]
The footnote may still appear on a different page. If you want to prevent
that add
\setupfootnotes[split=verystrict]
This doesn't work. I'm still getting footnotes appearing on the wrong page.
4. Notice
across pages by
\setupenumerations[footnote]
[before=\vbox\bgroup, after=\egroup]
The footnote may still appear on a different page. If you want to prevent
that add
\setupfootnotes[split=verystrict]
which can mess up the layout. You can slightly salvage things by adding
solution but no success.
I hope someone can help to fix this.
Test file
\defineenumeration[artikel][location=left,text=Artikel,headstyle=bold,stopper=.,distance=5pt,width=broad,before=\blank,after=\blank]
\setupenumerations[subartikel][text=,location=left,stopper=.,width=broad,distance=5pt,before
1 - 100 of 159 matches
Mail list logo
