[NTG-context] (no subject)

Dear List, After compiling the following example, which is from February 2021: \setuppapersize[A8,landscape] \setuplayout[leftmargin=2.5cm, leftmargindistance=0.2cm, backspace=2.9cm, width=4cm] \showframe \starttext

Re: [NTG-context] (No subject header)

On 12/27/2021 9:27 PM, Thomas Savary via ntg-context wrote: Thanks, Hans, for your advice. > a probably more reliable solution is to 'remove bad stuff' from the > loaded font by running over the features and removing bad matches > (which is less sensitive for order) I could edit the font

[NTG-context] (no subject)

Dear list, Let's say we have two types of synonyms: \definesynonyms[Abrev][Abrevs][\AbrevExp][\AbrevComp] \definesynonyms[Rubrica][Rubricas][\RubricaExp][\RubricaComp] Is it possible to combine them in a unique list of merged Abrevs and Rubricas? TIA Marcus Vinicius -- Todas as coisas

Re: [NTG-context] (no subject)

T. Kurt Bond schrieb am 17.07.2021 um 08:38: I have the following file: \setupfloat[table][default=nonumber] \starttext \section[title={Tables without force}] Here is a table without a caption, unforced. \startplacetable[location=none]   \bTABLE   \bTR\bTD r1c1

Re: [NTG-context] (no subject)

On 7/17/21 8:38 AM, T. Kurt Bond wrote: > I have the following file: > > \setupfloat[table][default=nonumber] > > \starttext > \startplacetable[title={Table With A Caption},location=force] > \bTABLE > \bTR\bTD r2c1 \eTD\bTD r2c2\eTD\eTR > \eTABLE > \stopplacetable

[NTG-context] (no subject)

Hi, Is there a way to have formula numbers showing all prefix segments? When I use prefixsegments, I get the desired numbering in the placelist but not in the formula number itself. For example: \starttext \setupcaption[figure][way=bytext,prefixsegments=1:*]

Re: [NTG-context] (no subject)

Hello! On Sat, Mar 13, 2021 at 6:09 PM Jeroen wrote: > I have the following document, but I want a different > \setuplayout[backspace] for the titlepage and copyright space. What is > the best way to achieve this? > https://wiki.contextgarden.net/Layout section Multiple layouts J.

[NTG-context] (no subject)

I have the following document, but I want a different \setuplayout[backspace] for the titlepage and copyright space. What is the best way to achieve this? \setupcolors [state=start] \usecolors [xwi] \usetypescriptfile [euler] \definetypeface

Re: [NTG-context] (no subject)

I am rarely using mailing lists, so i hope that i do it right :). Thanks for the help, Taco. I added an entry to the Wiki, but i'm not sure if it is sufficient this way and if it needs approval/review or something. Malte

Re: [NTG-context] (no subject)

On 6/17/2020 3:46 PM, Taco Hoekwater wrote: Like this (an arrangement that uses two physical pages, that is where the \poparrangedpagesAB and \arrangedpageA / \arrangedpageB come from): \installpagearrangement 1*4*reversed {\dosetuparrangement{2}{2}{4}{3}{3}% X,Y,Total,hcutmarks,vcutmarks

Re: [NTG-context] (no subject)

Like this (an arrangement that uses two physical pages, that is where the \poparrangedpagesAB and \arrangedpageA / \arrangedpageB come from): \installpagearrangement 1*4*reversed {\dosetuparrangement{2}{2}{4}{3}{3}% X,Y,Total,hcutmarks,vcutmarks

[NTG-context] (no subject)

Hi, I'm new to context and found this ``` \installpagearrangement 1*4*reversed {\dosetuparrangement{2}{2}{4}{3}{3}% X,Y,Total,hcutmarks,vcutmarks \pusharrangedpageFOURSINGLESIDEDFOLDEDREVERSED\poparrangedpagesTWO\relax} \def\pusharrangedpageFOURSINGLESIDEDFOLDEDREVERSED#1%

[NTG-context] (no subject)

I've seen the following solution in Stack Exchange to add referenceable enumeration labels to a framed enumeration environment: https://tex.stackexchange.com/questions/438588/context-and-metafun-framed-enumeration-with-counter-as-part-of-overlay It uses \wrappedcurrentconstruction. However, it

[NTG-context] (no subject)

Hi, I am typesetting a newsletter using newcolumnsets, and I am struggling with placing my graphics. Why isn't the graphic on page 2 at the bottom (code below)? Best, Denis ``` \usemodule[newcolumnsets,simulate] \useMPlibrary[dum] \setupbodyfont [palatino] \setuphead[section][style=\bfa\ss]

[NTG-context] (no subject)

Thank you for the instructions on how to make one's own style. I only need to change the formatting in the bibliography list, the formatting of the notes in the text is entirely up to the requirement. A strange effect (full MWE in attachment): \btxdoifelse {address} { {\btxspace \emdash

Re: [NTG-context] (no subject)

On 4/4/2019 9:30 PM, Dmitry Starostin wrote: In terminal: mtxrun --autogenerate --script context --autopdf Test.tex -> resolvers       | initialization | fatal error: kpse library is accessed (key: default_texmfcnf) this normally means that there is no file database ... context mkiv nor

[NTG-context] (no subject)

In terminal: mtxrun --autogenerate --script context --autopdf Test.tex -> resolvers | initialization | fatal error: kpse library is accessed (key: default_texmfcnf) All works from within TexShop. ___ If your

[NTG-context] (no subject)

I started getting a bug, updated today and am still getting it. I hope someone can at least make a note of it, if not provide a suggestion/solution. MWE included. The bug is the 'incollection' and 'inbook' entries in the bibliography have 1. have page numbers in parentheses for apa and chicago

Re: [NTG-context] (no subject)

On Fri, 22 Mar 2019 14:34:25 +0300 dstaros...@yandex.ru wrote: > specification=chicago Doesn't exist, hasn't been written... ___ If your question is of interest to others as well, please add an entry to the Wiki!

[NTG-context] (no subject)

All worked well until recently, but suddenly 'incollection' and 'book' entries show up in the bibliography with pages in parentheses, which they should not do. A bug? Test_Context_html.tex Description: TeX document

Re: [NTG-context] (no subject)

On 1/4/2019 1:39 AM, Lars wrote: Hi there, somehow floats that I place with keywords location=left or location=rightcreate a blank page first. Am I missing anything? I am sure that this wasn't the case before 19.12.2018. Right now I have the recent 03.01.2019 version. My MWE and an image

[NTG-context] (no subject)

Hi there, somehow floats that I place with keywords location=left or location=rightcreate a blank page first. Am I missing anything? I am sure that this wasn't the case before 19.12.2018. Right now I have the recent 03.01.2019 version. My MWE and an image of the output: \starttext  

Re: [NTG-context] (no subject)

Hi Otared, thanks, in fact, the placement of the \placerecipe{}{} in the text determines the placement of the framed in the right margin if I understand. Fabrice 2016-07-17 10:46 GMT+02:00 Otared Kavian : > Hi Fabrice, > > If you want the framed box to be placed on the same

Re: [NTG-context] (no subject)

Hi Fabrice, If you want the framed box to be placed on the same baseline as the letter A, in the example, then you have to tell ConTeXt to place a margin material right after A, as in A\\ \placerecipe{}{\framed{La vie n'est pas un long fleu||ve tranquille !}} B \\ C and you can play with

Re: [NTG-context] (no subject)

Hi Kavian, Okay, but I do not understand why the top of the framed can not be on the baseline of the letter A. Fabrice 2016-07-16 11:28 GMT+02:00 Otared Kavian : > Hi Fabrice, > > Indeed you can place your float a little bit higher in th emargin, as in > the example below, by

Re: [NTG-context] (no subject)

Hi Fabrice, Indeed you can place your float a little bit higher in th emargin, as in the example below, by using the keyword « high ». Best regrads: Otared K. % begin fabrice-inmargin.tex \setuplayout [width=13cm, rightmargin=5cm] \setupbodyfont[pagella,11pt] \definefloat [recipe]

Re: [NTG-context] (no subject)

Hi Kavian (your first name ?) Thank you for your suggestion but it is still a little problem: why the baseline of the framed is the third A and not the first ? thank you, Fabrice \useMPlibrary [dum] \setuplayout [width=13cm, rightmargin=5cm] \setupbodyfont[pagella,11pt] \definefloat

Re: [NTG-context] (no subject)

Hi Fabrice, You can give an option to \framed, as in: \placerecipe{}{\framed[align=justify,offset=2pt]{La vie n'est pas un long fleuve tranquille !}} You may also (in the above example) replace « fleuve » by « fleu||ve » in order to get a hyphenation. Best regards: OK > On 15 Jul 2016, at

Re: [NTG-context] (no subject)

Hi Wolfgang, Thank you. Now I want the figures or boxes with text are automatically placed in the right margin. Is this the best way ? How have justified text in the boxes ? Fabrice \useMPlibrary [dum] \setuplayout [width=13cm,

Re: [NTG-context] (no subject)

Fabrice Couvreur 15. Juli 2016 um 13:17 Hello everyone, The document https://drive.google.com/file/d/0B-mkD83s36jbREZmbGdPaGVHUDg/view?usp=sharing shows what I would do at the place reserved for the text and that reserved for comments, ratings ... Must use

[NTG-context] (no subject)

Hello everyone, The document https://drive.google.com/file/d/0B-mkD83s36jbREZmbGdPaGVHUDg/view?usp=sharing shows what I would do at the place reserved for the text and that reserved for comments, ratings ... Must use two columns or predefine the dimensions of the paper ? thanks, Fabrice

Re: [NTG-context] Unnumbered subject in TOC, numbered exercises in text

Thank you, Wolfgang, I changed 'special' into another word and replaced 'incrementnumber=yes' by 'incrementnumber=list'. But the result does still not reach my second goal: my exercise numbers are still 1 and 1 instead of having chapter number prefixes (1.1 and 2.1). Sytse Sytse Knypstra

Re: [NTG-context] Unnumbered subject in TOC, numbered exercises in text

Sytse Knypstra 30. November 2015 um 13:06 Dear list,

 In the following minimal example I would like to have: 
- the headings of \special in the toc, unnumbered
 - in the text, the numbers of the exercises preceded by the chapter number
 The first goal is

[NTG-context] Unnumbered subject in TOC, numbered exercises in text

Dear list,

 In the following minimal example I would like to have: 
- the headings of \special in the toc, unnumbered
 - in the text, the numbers of the exercises preceded by the chapter number
 The first goal is achieved when uncommenting the two options under \setuphead,
 the latter is

[NTG-context] (no subject)

hi, In the following code, the default stopper is the point. \starttext \startitemize[columns,a,joinedup] \item $f(0)$ \item $g(0,3)$ \item $f(\sqrt 2)$ \item $g(-4)$ \stopitemize \stoptext How to have a break ? Best regards, Fabrice

[NTG-context] (no subject)

Some features of m-steps does not work in mkiv. For example, I can not change colors and the shapes (first example), add steps from the cell (n) to the cell (n+m, m=2,3,4...) and reverse steps. \usemodule[steps,mathml] \starttext \startSTEPtable \setupSTEPcells [alternative=5, framecolor=red]

[NTG-context] (no subject)

On 2013–10–10 Xan wrote: ! Undefined control sequence. system tex error on line 28 in file /home/xan/fems/proves-context/prova.tex: Undefined control sequence ... 18 \starttikzpicture 19 [decoration={ 20markings, 21mark= 22

Re: [NTG-context] (no subject)

Am 20.03.2013 um 03:22 schrieb non-null hwit...@gmail.com: Here is a simple example: \starttext \startitemize[1,packed] Introduction text to the list below. \item some item text1 \item some item text2 \stopitemize I want to be able to adjust the vertical white space between the list

Re: [NTG-context] (no subject)

non-null hwit...@gmail.com wrote: I want to be able to adjust the vertical white space between the list introduction text and the list of items. How can this be accomplished? Probably \setupitemgroup[itemize][before={\blank[0em]}] will do what you want. For a complete list of parameters:

Re: [NTG-context] (no subject)

This is more of a follow-up question than an answer: wouldn't \blank[nowhite] be better? Quite possibly. When I read I want to be able to adjust the vertical white space my mind went towards adding whitespace instead of removing it, but that was just an assumption. I admit that I didn't look up

Re: [NTG-context] (no subject)

Op 24 jan. 2013 om 01:59 heeft Alfredo Catalina User kicked off the list. Best wishes, Taco ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist :

Re: [NTG-context] (no subject)

On 12/03/2012 10:34 AM, Peter Fiets wrote: http://laptop-gadgets.com/wp-content/themes/twentyeleven/google.html That subscriber is going away now ... ___ If your question is of interest to others as well, please

[NTG-context] (no subject)

In placing the heads and subheads of indices, \index defaults to Headlocator Head subheadlocator I need to get the subhead without repeating the Head, as in Headlocator subheadlocator How can I do this? Is there some documentation on this that I can read? Alan

Re: [NTG-context] (no subject)

Great, thanks, we are close to success. I can see the pdf file but it is broken and the console seems like it wants some next interaction: /context/base/lpdf-pdx.xml' pagesflushing realpage 1, userpage 1, subpage 1 pagesflushing realpage 2, userpage 2 pages

[NTG-context] (no subject)

The following code seems to ignore both justification (to the extent that a mono-spaced font could be justified) and the right margin. I recall seeing something that deals with this problem somewhere but can't recall where. \starttext \tt Janet had gone away to get the bath ready, when my aunt,

[NTG-context] (no subject)

The following example computes page numbers correctly, places the correct entries into the TOC, and produces the desired page headers on the first pages of chapters. However, there are some things it doesn't do properly: 1. It puts headers on blank pages at the ends of chapters even after I

[NTG-context] (no subject)

Hello, I'm working on a project to set up exams, basing the work on Aditya's asignment class that was published in Practex in 2006. I have a problem getting title information printed correctly. This is a cut-down version: \setupcolors [state=start] \definecolor [colorone]

Re: [NTG-context] (no subject)

I have consulted the manuals and even the source (core-con.tex) but I cannot find a way of getting a three-letter month using the \date command. For example, I would like to display today's date as 23-Apr-08. This gives a short display suitable for use in a margin, but avoids the

Re: [NTG-context] (no subject)

On Tue, Mar 25, 2008 at 7:27 PM, Horacio Suarez [EMAIL PROTECTED] wrote: Hello all, I have a stupid cuestion: I´m making a long 12 pages table. I´m using \setupfootertexts for the pagenumber. I don´t want page numbers in the header at all. header=hight or header=empty in the \title setup

Re: [NTG-context] (no subject)

thankyou very much Wolfgang y Peter. Horacio Suarez Editorial Antropofagia www.eantropofagia.com.ar Date: Wed, 26 Mar 2008 08:14:10 +0100 From: [EMAIL PROTECTED] To: ntg-context@ntg.nl Subject: Re: [NTG-context] (no subject) On Tue, Mar 25, 2008 at 7:27 PM, Horacio

[NTG-context] (no subject)

Hello all, I have a stupid cuestion: I´m making a long 12 pages table. I´m using \setupfootertexts for the pagenumber. I don´t want page numbers in the header at all. header=hight or header=empty in the \title setup is not enough, I still have a page number centered in the header. How can I

Re: [NTG-context] (no subject)

Hi Horacio, Horacio Suarez schrieb: Hello all, I have a stupid cuestion: I´m making a long 12 pages table. I´m using \setupfootertexts for the pagenumber. I don´t want page numbers in the header at all. header=hight or header=empty in the \title setup is not enough, I still have a

[NTG-context] (no subject)

HI Update 2007.1.24 in OSX but when i texexec -pdf test.tex next error massage why??? (/usr/local/teTeX/share/texmf.local/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded kpathsea: Running mktextfm lmmi7 /usr/local/teTeX/share/texmf/web2c/mktexnam: Could not map typeface abbreviation

Re: [NTG-context] (no subject)

On 1/28/07, 박내엽(NY Park) wrote: HI Update 2007.1.24 in OSX but when i texexec -pdf test.tex next error massage why??? (/usr/local/teTeX/share/texmf.local/tex/context/base/type-akb.tex)) bodyfont: 12pt rm is loaded kpathsea: Running mktextfm lmmi7 /etc./ I can't assure you that

[NTG-context] (no subject)

In the top of file type-pre.tex it can be read: %D This file is obsolete. We now have latin modern and proper %D typescripts. Forget about this file. However, tracing execution of \startformula[bold] shows it is still read then, whereas on \startformula (without the bold) it is not.

[NTG-context] (no subject)

unsubscribe ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context

Re: [NTG-context] title, subject table of contents

VnPenguin [EMAIL PROTECTED] said on 2005-02-13, 1:02 (+0100 GMT): \setuphead [chapter] [number=no] and use \chapter instead of \title. So I can obtain the TOC. But I dont why there is no clickable link in the TOC at

Re: [NTG-context] title, subject table of contents

On Sun, 13 Feb 2005 11:44:11 +, cormullion [EMAIL PROTECTED] wrote: VnPenguin [EMAIL PROTECTED] said on 2005-02-13, 1:02 (+0100 GMT): \setuphead [chapter] [number=no] and use \chapter instead of \title. So

Re: [NTG-context] title, subject table of contents

VnPenguin wrote: But if I replace \chapter by \title; \section by \subject, I can not have a TOC at all. This is the code: that's because those are not written to the list; \startfrontmatter \charter{xxx} \stopfrontmatter gives you unnumbered entries but written to the list; (it is possible to

Re: [NTG-context] title, subject table of contents

On Sat, 12 Feb 2005 21:00:22 +0100, Thomas A. Schmitz [EMAIL PROTECTED] wrote: Hi, I had a similar problem some weeks ago. Here's what Hans wrote in November 2004: \title never ends up in the toc, unless configured however, you can add section structure (bodypart, appendix, etc) and

[NTG-context] title, subject table of contents

Hi all, When I use: --- \setuplist [chapter] [before=\blank, after=\blank, style=bold] \setuplist [section] [alternative=c] \starttext \placelist[chapter,section][alternative=c] \chapter{One} \section{One A}

[NTG-context] (no subject)

Hi all, Is it possible to place some text in two columns into either the table or figure environments without the columns getting ignored. I have some data which I do not want to put in table form but require it in two columns with either a figure ot table label at the bottom. For example

Re: [NTG-context] (no subject)

At 07:15 05/02/2004, you wrote: Hallo, it seems to me that text surrounding is ignored for floats inside columns, see the code below. Am I right? yes; see columns.pdf for the many figure options in column sets Hans ___ ntg-context mailing list

[NTG-context] (no subject)

Hallo, it seems to me that text surrounding is ignored for floats inside columns, see the code below. Am I right? Vit Zyka \starttext \startcolumns[n=2] \placefigure[left,none]{}{\framed[width=1cm,height=3ex]{!}} \input knuth \stopcolumns \stoptext

[NTG-context] (no subject)

Hallo ConTeXt debater, this buffer storage works perfectly: \starttext \startbuffer[TMP] Bla \stopbuffer \getbuffer[TMP] \stoptext but why not this one? \starttext \def\tmp{% \startbuffer[TMP] Bla \stopbuffer } \tmp \getbuffer[TMP] \stoptext Thanks Vit

[NTG-context] (no subject)

Hello,everybody, I have a problem while using context to create some flowcharts. The beginning of my tex source file looks like: \setupoutput[pdftex] \usemodule[chart] Naturally I got a flowchart in pdf version. But a pdf version flowchart is not suitable for

Re: [NTG-context] (no subject)

wei jm, Why do you want it in a different format? What application are you using for your report? Nigel On 21 Jan 2004, at 08:54, hl590we wrote: Hello,everybody, I have a problem while using context to create some flowcharts. The beginning of my tex source file looks like:

[NTG-context] (no subject)

confirm 901767 -- David Arnold College of the Redwoods. Mathematics Department 7351 Tompkins Hill Road Eureka, CA 95501 Office phone: 707-476-4222 Fax: 707-476-4424 Home page: http://online.redwoods.edu/instruct/darnold/ ___ ntg-context mailing list

[NTG-context] (no subject)

Sorry if this is a double post; I sent this message on Friday, and I think it somehow got lost. In March/April 2002, Hans and Idris had an interesting exchange about the topic critical editions in context here in ntg-context; the main question was whether the functionality of edmac could be

Re: [NTG-context] (no subject)

On Sun, 21 Sep 2003 21:24:04 +0200 (MEST) Severin Obertuefer [EMAIL PROTECTED] wrote: how can I cut the the part of the path c between A and B, so that the result is like a cheese :) path cheese ; cheese := c rotated angle B ; cheese := cheese cutafter (origin--A) ; Jens

[NTG-context] (no subject)

Hi, I'm trying to configure my itemization environment so that second level switches to a smaller font. The following code does not produce the expected result (no change in font size). I imagine I'm doing something wrong but could not figure what ... (setupitemize[1][before=\tx] is works well)

[NTG-context] (no subject)

Jens-Uwe Morawski [EMAIL PROTECTED] wrote: On Fri, 19 Sep 2003 11:38:03 +0200 Patrick Gundlach [EMAIL PROTECTED] wrote: Holger Schöner [EMAIL PROTECTED] writes: For some reason the example you provided does not work at all for me (there is no page break before chapters; perhaps my