Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

I managed to get this updated now. It looks ok now with numbers but i had to remove the upscale flag. With upscale flag it only shows a few kilobytes instead of gigabits, so kind of reversed ;) But numbers seem to match actual traffic now On Wed, Mar 7, 2018 at 11:16 AM, Enrico Kern

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

no yet, will do later today. Thanks for the reminder. Wasnt aware new packages are already up On Wed, Mar 7, 2018 at 10:46 AM, Simone Mainardi wrote: > Enrico, I was wondering if you had the chance to try new packages. You can > just run an upgrade of your package manager to

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

Enrico, I was wondering if you had the chance to try new packages. You can just run an upgrade of your package manager to get the latest version... Thanks Simone > On 19 Feb 2018, at 20:10, Enrico Kern wrote: > > Sure. Tell me when new packages are out and i give it a

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

Sure. Tell me when new packages are out and i give it a go. Am 19.02.2018 19:39 schrieb "Simone Mainardi" : Enrico, We have made some fixes. Can you please hold a couple of hours (a new build is in progress) and test again? If you still experience issues, please consider

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

Enrico, We have made some fixes. Can you please hold a couple of hours (a new build is in progress) and test again? If you still experience issues, please consider sending us an sFlow capture or access to the machine. Thanks, Simone > On 8 Feb 2018, at 12:30, Enrico Kern

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

Hey, the interface status page does not show any dropped packets or blocked flows. Also --disable-sflow-upscale doesnt help then it shows 1.79 TBit/s for hosts as example. Its like back to the arista problem we had with 2.x which got patched after i provided a dump. On Thu, Feb 8, 2018 at 12:09

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

Enrico, Can you please verify, under the interface stats page, if there are sFlow drops reported? If you want to try and disable upscale on the latest 3.3, you can try with --disable-sflow-upscale | Ignore sFlow sampling rate (1:1 is used) and thus Simone > On 8 Feb 2018, at

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

ok correction, even without upscale it shows wrong numbers. seems like i need to revert to an older version for now :( On Thu, Feb 8, 2018 at 11:32 AM, Enrico Kern wrote: > Same behavior now with the new upgrade from 3.1 to 3.3 ;) And im stil > using upscale-traffic :( >

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

Same behavior now with the new upgrade from 3.1 to 3.3 ;) And im stil using upscale-traffic :( nprobe --upscale-traffic --zmq tcp://*:5557 -i none --collector-port 6343 --verbose 2 --dump-stats -V9 it shows me riddicolous traffic numbers now from my arista switch with speeds of 70Gbit/s on

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

ah that did the trick. Thank you On Thu, Jun 8, 2017 at 11:48 AM, Simone Mainardi wrote: > Enrico, > > If I remember correctly, your Arista switches are sending sFlow. So please > try to add nProbe option* --upscale-traffic* that will adjust the traffic > on the basis of

Re: [Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

Enrico, If I remember correctly, your Arista switches are sending sFlow. So please try to add nProbe option* --upscale-traffic* that will adjust the traffic on the basis of sFlow sampling rates. Simone On Thu, Jun 8, 2017 at 10:52 AM, Enrico Kern wrote: > Hi all,

[Ntop] Wrong Traffic Numbers after upgrade from 2.5 to 3.1

Hi all, yesterday i upgraded our ntop and nprobe from 2.5 to 3.1. Now it shows absolute wrong traffic numbers. As example we have machines constantly doing 4 to 10 gbit/s and all it shows now for all hosts is 2 kbit/s up to 1 Mbit/s thats all. We use normal nprobe where our arista switches send