This question has a clear answer: no. There is no such Make/Config
option.
However, why not just do the following?
./configure [options]
cd clients
make upsmon upsc
You can't use "make install" with this method. But if you have to, you
could install these two binaries by hand:
cp upsmon /us
Greetings:
I searched through the Makefile, the FAQ, and google, and was unable to
find a clear answer for this question...
Is there a Make/Config option that would build JUST the client binaries,
upsmon and upsc?...
Sorry if this has been answered elsewhere..
Regards,
Richard.
_
Great! Normally this is mounted automatically at system startup, so
nobody usually worries about it. Nice to hear that it is working now.
I have added a note to my website instructions that you were
following.
-- Peter
[EMAIL PROTECTED] wrote:
>
> > Could you refresh my memory about your opera
> Could you refresh my memory about your operating system, kernel
> version, libusb version, and contents of "ls -lR /proc/bus/usb"?
> Perhaps you need to mount your USB filesystem.
> Does "mount" show a line such as the following?
>
> usbfs on /proc/bus/usb type usbfs (rw)
Hiya!
This did the tri
Hi Richard,
This is bizarre. Using -DD, you should get more output between "debug
level is '2'" and "No appropriate HID device found". You should at
least get something like:
debug level is '2'
Checking device (/) (005/001)
- VendorID:
- ProductID:
- Manufacturer: Linux 2.6.11-1
>> Solution is to upgrade to nut-2.0.5-pre2.
>
> right, I've missed that one. thanks Arjen.
> btw, the final 2.0.5 will be out either this afternoon, or on monday.
Greetings:
I've been reading this page in configuring my BackUPS 650ES:
http://www.mscs.dal.ca/~selinger/ups/backups.html
I get the
Hello.
I've been running a two machine setup with a mge-shut for some time
without problems, and now I'm configuring a three machine setup with an
APC Smart 1500.
The UPS has three machines connected to it, in a peculiar way: one
windows machine is connected via USB. The second windows machine i
2007/1/12, Arjen de Korte <[EMAIL PROTECTED]>:
>> I've been following through the instructions on how to connect an APC
>> BackUPS 650 ES to USB, and have it monitored with NUT...
[...]
>> [EMAIL PROTECTED]:/usr/src/nut-2.0.4# ./drivers/newhidups -a apc -u root
>> Network UPS Tools: New USB/HID
> I've been following through the instructions on how to connect an APC
> BackUPS 650 ES to USB, and have it monitored with NUT...
> I'm running kernel version 2.6.17.3, and have libusb-0.1.so.4.4.0
> libraries installed.
FWIW we have found our 2.6.17 systems to be unstable when connected to APC
>> I've been following through the instructions on how to connect an APC
>> BackUPS 650 ES to USB, and have it monitored with NUT...
[...]
>> [EMAIL PROTECTED]:/usr/src/nut-2.0.4# ./drivers/newhidups -a apc -u root
>> Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4)
>>
>> No matching USB/HI
2007/1/12, [EMAIL PROTECTED] <[EMAIL PROTECTED]>:
Greetings:
I've been following through the instructions on how to connect an APC
BackUPS 650 ES to USB, and have it monitored with NUT...
I know my system can SEE the UPS, as DMESG shows this:
hiddev96: USB HID v1.10 Device [APC Back-UPS ES 650
11 matches
Mail list logo
