Following the instructions a following site I can not get nut to work with my UPS.
http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups Hope that you can find out what is wrong by the provided info in the email Best Regards, Magnus Karlsson # lsusb -s 001:005 -v Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x06da Phoenixtec Power Co., Ltd idProduct 0x0002 UPS bcdDevice 1.00 iManufacturer 4 Powerware iProduct 24 Powerware UPS iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 60mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 20 Device Status: 0x0000 (Bus Powered) ************************************ /etc/udev/rules.d/90-nut-ups.rules # Eaton 5115 ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="06da", ATTR{idProduct}=="0002", MODE="0660", GROUP="nut" ************************************ ************************************ Issuing command root@laptux:~# upsdrvctl start Network UPS Tools - UPS driver controller 2.6.4 Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 This Liebert device (06da:0002) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try running the driver with the '-x productid=0002' option. Please report your results to the NUT user's mailing list <nut-upsuser@lists.alioth.debian.org>. No matching HID UPS found Driver failed to start (exit status=1) ******************************************* ********************************************** /etc/nut/nut.conf MODE=standalone ***********************************************
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser