Hi Christophe,
Thanks for the response.
> I agree with Jonas to say that all the magic is in ss_info_notify. At least
> that's the case outside LTE, I don't know a lot about LTE specificities.
Any idea how to modify the source to get ss_info_notify running in
qmimodem The question is how to do
Hi,
On 11/27/20 3:00 PM, Jonas Bonn wrote:
Hi,
On 27/11/2020 10:47, Jupiter wrote:
Hi Jonas,
Thanks for the response and kind helps.
and the modem continues to reset itself. Is this coincidental with
you removing the antenna... I can't tell?
My apology, a watchdog to monitor and to
Hi Jonas,
> Looking at the log, it sure does seem like the modem just stops sending
> network status indications. What happens if you re-assert interest in
> these notifications regularly... something like this?
>
> --- a/drivers/qmimodem/network-registration.c
> +++
Hi,
On 27/11/2020 10:47, Jupiter wrote:
Hi Jonas,
Thanks for the response and kind helps.
and the modem continues to reset itself. Is this coincidental with
you removing the antenna... I can't tell?
My apology, a watchdog to monitor and to restart ofono when it lost
register was still
Hi Jonas,
Thanks for the response and kind helps.
> and the modem continues to reset itself. Is this coincidental with
> you removing the antenna... I can't tell?
My apology, a watchdog to monitor and to restart ofono when it lost
register was still running.
I attached a new log which
Hi,
On 20/11/2020 06:26, Jupiter wrote:
Hmm, strange, I tried to restart ofonod several times, the last one
was able to reconnect the 4G and network automatically after removing
the antenna to lose network, then adding the antenna, the only
difference was there were many messages popped out in
Hi,
On 20/11/2020 00:39, Jupiter wrote:
Hi,
I am running ofono version 1.30 for uBlox SARA-R4 QMI on iMX6, it is
functional well, but there is one problem, it failed to be reconnected
when the 4G LTE signaling strength level is back to normal. Here is
what I tested:
- Connect antenna, it was