No LSI controller on those, they connect directly to the CPU with razor cards.
In theory they can utilize the entire bus speed but in the backplane you get
around 2GB/sec throughout on each nvme drive.
Sent from my iPhone
> On Mar 7, 2017, at 11:25 PM, Stephan Budach wrote:
>
>
>
> - U
Hi Prakash,
- Ursprüngliche Mail -
> Von: "Prakash Surya"
> An: omnios-discuss@lists.omniti.com
> Gesendet: Mittwoch, 8. März 2017 01:55:19
> Betreff: [OmniOS-discuss] Quick Test of r151021 ISO Install using Xen
> HVM and an "xdf" Device
> Hey All,
> I just wanted to post and say that
- Ursprüngliche Mail -
> Von: "Dan McDonald"
> An: "Geoff Nordli"
> CC: "omnios-discuss"
> Gesendet: Mittwoch, 8. März 2017 07:44:30
> Betreff: Re: [OmniOS-discuss] new supermicro server
>
> You didn't mention anything in the original note about NVMe, and
> neither did the spec sheet.
You didn't mention anything in the original note about NVMe, and neither did
the spec sheet.
NVMe 1.0 and 1.1 should work on 020 and later OmniOS. Hang out on the illumos
developers list to see the latest on that front.
Dan
Sent from my iPhone (typos, autocorrect, and all)
___
On 2017-03-07 09:35 PM, Stephan Budach wrote:
- Ursprüngliche Mail -
Von: "Dan McDonald"
An: "Geoff Nordli"
CC: "omnios-discuss"
Gesendet: Mittwoch, 8. März 2017 02:21:20
Betreff: Re: [OmniOS-discuss] new supermicro server
On Mar 7, 2017, at 8:16 PM, Geoff Nordli wrote:
Hi.
I
- Ursprüngliche Mail -
> Von: "Dan McDonald"
> An: "Geoff Nordli"
> CC: "omnios-discuss"
> Gesendet: Mittwoch, 8. März 2017 02:21:20
> Betreff: Re: [OmniOS-discuss] new supermicro server
>
>
> > On Mar 7, 2017, at 8:16 PM, Geoff Nordli wrote:
> >
> > Hi.
> >
> > I am looking at or
Hi Dan,
On Tue, 7 Mar 2017, Dan McDonald wrote:
> Not to be confused with cal(1), but does anyone here use calendar(1)?
I use it here in my mail zone.
> Trying to gauge how hard I should try to replace it or not.
It would not be anywhere near as anoying to lose it as it was to
discover bind w
> On Mar 7, 2017, at 8:16 PM, Geoff Nordli wrote:
>
> Hi.
>
> I am looking at ordering a new 3U supermicro server. as an all-in one. I
> have been using these recently:
>
> https://www.supermicro.com/products/system/3U/6038/SSG-6038R-E1CR16L.cfm
>
> It has the LSI 3008 HBA in IT mode.
>
>
Hi.
I am looking at ordering a new 3U supermicro server. as an all-in one.
I have been using these recently:
https://www.supermicro.com/products/system/3U/6038/SSG-6038R-E1CR16L.cfm
It has the LSI 3008 HBA in IT mode.
Any other suggestions out there?
thanks,
Geoff
___
Hey All,
I just wanted to post and say that I've tested the new r151021 ISO
installer using a Xen VM and was able to successfully perform the
installation. Here's a copy of the Xen VM configuration that I used:
# cat ami-template.cfg
builder='hvm'
name='ami-template'
vcpus=4
memory=4096
vif=['bri
Yeah, I have two servers that came with those.
I can’t figure out how to put them in jbod mode is the only problem.
John Barfield
Engineering and Stuff
M: +1 (214) 425-0783 O: +1 (214) 506-8354
john.barfi...@bissinc.com
4925 Greenville Ave, Ste 900
Dallas, TX 75206
For Support Request
>> The old card was: LSI SAS3081E-S
Eeesh, that's the old 1068 chipset.
>> New Card is: LSI BAT1S1P
That's a battery backup part number. Odd.
Dan
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listin
> On Mar 7, 2017, at 5:22 PM, John Barfield wrote:
>
> I caught that and pulled the SAS HBA. I’ve got another Oracle RAID controller
> card in now and the installer just finished.
>
> The old card was: LSI SAS3081E-S
>
> New Card is: LSI BAT1S1P
>
> Thanks for the help. I just did an old fas
I caught that and pulled the SAS HBA. I’ve got another Oracle RAID controller
card in now and the installer just finished.
The old card was: LSI SAS3081E-S
New Card is: LSI BAT1S1P
Thanks for the help. I just did an old fashioned hardware RAID1 in the LSI GUI.
John Barfield
Engineering and S
> On Mar 7, 2017, at 4:46 PM, John Barfield wrote:
>
>
open() returned EIO:
File "/usr/lib/python2.6/vendor-packages/pkg/manifest.py", line 1713, in
gen_actions_by_type
raise apx._convert_error(e)
IOError: [Errno 5] I/O error
2017-03-07 15:38:08,494 InstallationLogger ERROR Chec
Not to be confused with cal(1), but does anyone here use calendar(1)?
Trying to gauge how hard I should try to replace it or not.
Thanks,
Dan
Sent from my iPhone (typos, autocorrect, and all)
Begin forwarded message:
> From: "Peter Tribble"
> Date: March 7, 2017 at 3:33:40 PM EST
> To: illumo
Disappearing disks is a sign what disk controller are you running? Dale
mentioned some of those possibilities as well.
Dan
Sent from my iPhone (typos, autocorrect, and all)
> On Mar 7, 2017, at 3:25 PM, John Barfield wrote:
>
> Yeah, its definitely the hurry factor…this SAN was running r
Not using hardware RAID mode. It is using the on board SAS controller but I’m
running in jbod or passthrough mode. Whatever its called on here.
I just sent a list of errors that I’ve hit so far to the list replying to Dan
McDonald.
If you guys really want me to I’ll rerun the installer one mor
Yeah, its definitely the hurry factor…this SAN was running r151012 and instead
of upgrading I’m just reinstalling. (going on pretty long outage duration now)
I did get python errors @99% the last time I ran the installer.
Here are a list of issues I had (I did not write down the actual error mes
> On Mar 7, 2017, at 3:13 PM, John Barfield wrote:
>
> I’m having several installer issues with the r151020 usb installer.
>
> It keeps crashing at different parts with different errors.
Don't keep us in suspense! What are the errors you are seeing?
> My question is: should I be using r151014
The installer crashes, or OmniOS itself crashes? I'd like to know at least a
bit more detail.
Btw, the installer for the next release of OmniOS is brand new, based on our
PXE installer Kayak. Between Loader replacing GRUB, Python2.7, and reports like
yours, it's time to put Caiman out to pastu
I’m having several installer issues with the r151020 usb installer.
It keeps crashing at different parts with different errors.
My question is: should I be using r151014 and run pkg update until the next LTS
release?
Or is there a best-practices doc that I need to follow to get r151020 working
> On Mar 7, 2017, at 11:28 AM, Andy Fiddaman wrote:
>
> I'm a bit late to the party but I've downloaded this and burned it to a
> CD (old school, I know) and tried booting a Dell R620. It hangs just after
> printing:
>
> loading ficl string class
> /
>
> With just that / on the las
On Wed, 1 Mar 2017, Dan McDonald wrote:
; Please refresh your copy by downloading here:
;
; http://kebe.com/~danmcd/webrevs/r151021-kayak.iso
I'm a bit late to the party but I've downloaded this and burned it to a
CD (old school, I know) and tried booting a Dell R620. It hangs just after
p
24 matches
Mail list logo