;>
>> And
>>
>> Intel ICH10R SATA (So I'm guessing your using this one.)
>>
>> -Original Message-
>> From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On
>> Behalf Of Brian Hechinger
>> Sent: Friday, Ja
Which controller exactly do you have?
Do you know firmware version?
Which hard drives?
It might not tell much, but it’s good to have as much information as possible.
When comstar hangs, can you telnet to the iSCSI port?
What does svcs says, is the service running?
What happens in you try to resta
I had the same problems…
In my case, comstart hanging went away with downgrade to early 014 version, but
then ZFS started to lock.
What is your hardware? Any JBODs? SAS or SATA drives? Expanders?
Currently, I didn’t had Comstar lock for about a month, and I’m running latest
014 (but I did red
> On 22 Oct 2015, at 23:51, Bob Friesenhahn
> wrote:
>
> On Thu, 22 Oct 2015, Matej Zerovnik wrote:
>> Bob:
>> Yes, my ZFS is ashift=12, since all my drives report 4k blocks (is that what
>> you ment?). The pool is completly empty, so there is enough place for
&g
;
> As I understand it, ff you're writing to only one zfs folder, your queue
> depth will stay at 1 on the log device and you be come latency bound.
>
> -Chip
>
> On Thu, Oct 22, 2015 at 2:02 PM, Matej Zerovnik <mailto:ma...@zunaj.si>> wrote:
> Hello,
>
>
> If the record size for the zpool and slog is set at the default value of
> 128K, it will greatly reduce the measured IOPS relative to that measured with
> a recordsize of 4K.
>
> Min Kim
>
>
>
>
>> On Oct 22, 2015, at 12:26 PM, Matej Zerovnik >
some of that as you have to share it with the other
> disks.
>
> Min Kim
>
>
>
>> On Oct 22, 2015, at 12:02 PM, Matej Zerovnik > <mailto:ma...@zunaj.si>> wrote:
>>
>> Hello,
>>
>> I'm building a new system and I'm having a
Hello,
I'm building a new system and I'm having a bit of a performance problem. Well,
its either that or I'm not getting the whole ZIL idea:)
My system is following:
- IBM xServer 3550 M4 server (dual CPU with 160GB memory)
- LSI 9207 HBA (P19 firmware)
- Supermicro JBOD with SAS expander
- 4TB
Hello Richard. Thank you very much for your answer.
On 10. 04. 2015 17:19, Richard Elling wrote:
[sidebar conversation: I've experienced bad results with WD Black 4TB
SAS drives]
What kind of bad results? What drives do you use now or what do you
recommend? I was thinking of going with HGST any
On 27. 03. 2015 16:13, Narayan Desai wrote:
Having been on the receiving end of similar advice, it is a
frustrating situation to be in, since you have (and will likely
continue to have) the hardware in production, without much option for
replacement.
When we had systems like this, we had a l
On 27. 03. 2015 15:56, Dan McDonald wrote:
iostat -Ei | grep Error reports that one device has 6 hard errors and 6 device
not ready errors, but that is a local drive, attached to a different controller
(LSI Megaraid).
LSI Megaraid, ESPECIALLY with 006, is not going to be as good as either
mpt
chine. Too scary:)
Matej
On 27. 03. 2015 15:43, Dan McDonald wrote:
On Mar 27, 2015, at 9:07 AM, Matej Zerovnik wrote:
Hello!
We are having issues with iSCSI on work. Every now and then, iSCSI target just
hangs up. We are unable to kill it, restart it or do anything else to restore
the se
Hello!
We are having issues with iSCSI on work. Every now and then, iSCSI
target just hangs up. We are unable to kill it, restart it or do
anything else to restore the service. The only option to restore iscsi
target back to working state, is to reboot the whole server and loose
all the sessi
Hello!!
I'm trying to setup NFS and SMB shares with ACL support and I got into
troubles...
I have a share, that is mounted to linux client over NFSv3 and to
windows client over SMB. My ACL's looks like the following:
https://dl.dropboxusercontent.com/u/5934229/forumi/ACL_for_share.png
What I w
Hello!!
I'm trying to setup NFS and SMB shares with ACL support and I got into
troubles...
I have a share, that is mounted to linux client over NFSv3 and to
windows client over SMB. My ACL's looks like the following:
https://dl.dropboxusercontent.com/u/5934229/forumi/ACL_for_share.png
What I wan
15 matches
Mail list logo
