I have worked with the 20.00.04.00 and it has worked very well. But the
07 has had problems. All on freebsd or freenas. Haven't tested with omni.
If anyone has the sata 6gb firmware sitting around version 20.00.04.00
would love to get my hands on it
linda
On 5/23/16 3:50 PM, Eric Sproul
Hey,
I just plugged in the card and it was recognized:) It’s a LSI SAS3008 card.
prtconf -d says:
pci1000,30a0 (pciex1000,97) [LSI Logic / Symbios Logic SAS3008 PCI-Express
Fusion-MPT SAS-3], instance #8
On the other hand, lspci says different:
15:00.0 RAID bus controller: LSI Logic / Symbios
Hi Matej,
How did you get the mpt_sas driver to attach to your card ?
Looks like your device id is pci1000,30a0.
>From prtconf -d I see for my SAS 9305-24i :-
pci1000,31a0 (pciex1000,c4) [LSI Logic / Symbios Logic
SAS3224 PCI-Express Fusion-MPT SAS-3] (driver not attached)
lspci does
On Mon, May 23, 2016 at 4:18 PM, Dan McDonald wrote:
> And if you do, make sure it's version 19 or lower. The IT firmware > 19 is
> known to be flaky. Check the illumos list archives for details on why.
We may want to revisit that advice-- I've noticed that LSI/Avago have
> On May 23, 2016, at 4:10 PM, Fábio Rabelo wrote:
>
> Hi to all ...
>
> You may need to flash the IT firmware :
>
> http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads
And if you do, make sure it's version 19 or lower. The IT
> On May 23, 2016, at 3:19 PM, Richard Skelton wrote:
>
> Hi,
> I have SAS 9305-24i Host Bus Adapter but it not seen by OmniOS
> Which driver should it use? Can it be configured?
Sounds like it should be attachable via the mpt_sas driver. Can you utter
"lspci" and
Hi,
I have SAS 9305-24i Host Bus Adapter but it not seen by OmniOS
Which driver should it use? Can it be configured?
Also the Intel X520-DA2 and the onboard X540 are also not recognised.
Both should use the ixgbe drive ?
What information do you need to add to a OmniOS r15018 system.
Dan
> To: Fábio Rabelo <fa...@fabiorabelo.wiki.br>; Dan McDonald <dan...@omniti.com>
> Cc: omnios-discuss <omnios-discuss@lists.omniti.com>
> Subject: Re: [OmniOS-discuss] LSI3108
>
>
>> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo <fa...@fabiorabelo.wiki.br> wrote
Donald <dan...@omniti.com>; Fábio Rabelo <fa...@fabiorabelo.wiki.br>;
omnios-discuss <omnios-discuss@lists.omniti.com>
Subject: Re: [OmniOS-discuss] LSI3108
I tried diskmap.py on a SAS3 LSI card today and it works, I just neede to
change the path to sas ircu utils so it runs sas3
] On Behalf
Of Dan McDonald
Sent: Thursday, March 03, 2016 12:54 PM
To: Fábio Rabelo <fa...@fabiorabelo.wiki.br>; Dan McDonald <dan...@omniti.com>
Cc: omnios-discuss <omnios-discuss@lists.omniti.com>
Subject: Re: [OmniOS-discuss] LSI3108
> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo <f
On Thu, 3 Mar 2016 15:46:15 -0300
Fábio Rabelo wrote:
>
> I do not have a choice to use 6 Gb/s HBAs ...
>
According to specs 3008 also provides 12 Gb/s SAS?
http://www.avagotech.com/products/server-storage/io-controllers/sas-3008
--
Hilsen/Regards
Michael Rasmussen
> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo wrote:
>
>
> I have a customer who wants to build a pure SSD Storage with Sandisk
> 12 Gb/s SAS interface !
Get an LSI 3008-based card. The 9300, for example.
Dan
___
I am a long time user of the IBM 1015 ..
Problem :
I have a customer who wants to build a pure SSD Storage with Sandisk
12 Gb/s SAS interface !
Is will run several SQL VMs in it to replace an aging SUN Server .
Capicce ??
I do not have a choice to use 6 Gb/s HBAs ...
Thanks ...
Fábio
On Thu, 3 Mar 2016, Dan McDonald wrote:
;
; > On Mar 3, 2016, at 9:17 AM, Martin Dojcak wrote:
; >
; > Hi,
; >
; > look at illumos Hardware Compatibility List:
; >
; > http://illumos.org/hcl/
; >
; > there is support for LSI 3008 and 3108 hba
;
; Note that the 3108 is HW-RAID
OK, reading the manual for the controller ...
I do not found anything like "passthru"
What I did found was a fuction called "expose Hard Disk to Host" ...
And, looks like is is what I need
Coming back when I have the card in my hands ...
Thanks again
Fábio Rabelo
2016-03-03 12:31
> On Mar 3, 2016, at 9:17 AM, Martin Dojcak wrote:
>
> Hi,
>
> look at illumos Hardware Compatibility List:
>
> http://illumos.org/hcl/
>
> there is support for LSI 3008 and 3108 hba
Note that the 3108 is HW-RAID and uses the mr_sas(7D) driver, while 3008 (with
IT
Hi,
look at illumos Hardware Compatibility List:
http://illumos.org/hcl/
there is support for LSI 3008 and 3108 hba
MD
On 03/03/2016 03:00 PM, Fábio Rabelo wrote:
> Hi to all
>
> I just did a try in google to find if recent LSI3108 are supported in OmniOS,
> but did not
> find anuthing ..
>
Hi to all
I just did a try in google to find if recent LSI3108 are supported in
OmniOS, but did not find anuthing ..
Someone knows the answer ?
Recent SAS 12 GB/s LSI 3008 and 3108 works with OmniOS ?
Fábio Rabelo
___
OmniOS-discuss mailing list
18 matches
Mail list logo