Anyone have any success installing vbox on omnios?
I just did the install and it says it is partially installed.
I know there were some errors because it tries to use the netbow
(crossbow) network driver instead of the streams based one.
I am sure there are some other reasons it doesn't work
On 13-05-27 11:23 PM, Geoff Nordli wrote:
Anyone have any success installing vbox on omnios?
I just did the install and it says it is partially installed.
I know there were some errors because it tries to use the netbow
(crossbow) network driver instead of the streams based one.
I am sure
On 13-05-28 12:19 PM, Jared Morrow wrote:
The only performance numbers I really have lying around are from when
I changed over a centos 5 VM to the virtio driver. I just did a simple
bonnie test with a 2gb file and limited it to use 1gb of ram (on two
cpu's). I don't have numbers offhand for
On 13-08-27 11:30 PM, Paul B. Henson wrote:
On Aug 27, 2013, at 10:44 PM, Geoff Nordli geo...@gnaa.net wrote:
/usr/bin/VirtualBox
VirtualBox: supR3HardenedMainGetTrustedMain:
dlopen(/opt/VirtualBox/amd64/VirtualBox.so,) failed: ld.so.1: VirtualBox:
fatal: libXinerama.so.1: open failed
On 13-08-28 10:22 AM, Jim Klimov wrote:
On 2013-08-28 17:48, Geoff Nordli wrote:
On 13-08-27 11:30 PM, Paul B. Henson wrote:
On Aug 27, 2013, at 10:44 PM, Geoff Nordli geo...@gnaa.net wrote:
/usr/bin/VirtualBox
VirtualBox: supR3HardenedMainGetTrustedMain:
dlopen(/opt/VirtualBox/amd64
Is there a KVM control command that allows you to save state or trigger
an guest OS shutdown?
I would like to create some script that gracefully powers off the VMs in
the event you shutdown/reboot the host computer.
thanks,
Geoff
___
When I try using the built-in dhcp server for KVM it says it is
disabled. How do I enable it?
I pulled the settings from:
https://github.com/joyent/illumos-kvm-cmd/blob/master/README.md
this is the error message:
qemu-system-x86_64: -net
and enabled the dhcp.
On 13-09-13 09:19 PM, Geoff Nordli wrote:
When I try using the built-in dhcp server for KVM it says it is
disabled. How do I enable it?
I pulled the settings from:
https://github.com/joyent/illumos-kvm-cmd/blob/master/README.md
this is the error message:
qemu-system
On 13-10-30 01:34 PM, Eric Sproul wrote:
On Wed, Oct 30, 2013 at 4:25 PM, Chris Siebenmann c...@cs.toronto.edu wrote:
This is a long shot and I suspect that the answer is no, but: in
OmniOS, is it possible somehow to have disk device names for disks
behind LSI SAS controllers that are based
Is there an updated install image that would contain the i210 NIC
drivers?I am using
OmniOS_Text_bloody_20130208.
If not, any documentation on how to add the updated igb driver into the
install image?
thanks,
Geoff
___
OmniOS-discuss mailing
On 13-12-22 05:15 PM, Sriram Narayanan wrote:
Hi folks:
Could anyone recommend a hosting that are OmniOS-friendly?
I'm looking for:
- A Physical server that will run OmniOS as a build server.
- Have ECC RAM
- Have the ability for me to either connect via IPKVM or other to
diagnose boot up
I am not very well versed in this area, but I have the core dump from
the crash. I can upload it if someone wants to take a more detailed look.
Here is what I have so far:
/usr/bin/mdb -k unix.0 vmcore.0
Loading modules: [ unix genunix specfs dtrace mac cpu.generic uppc apix
scsi_vhci zfs
Is anyone is using SaltStack (http://www.saltstack.com/) on OmniOS.
If so, how you are getting it installed?
thanks,
Geoff
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
On 14-03-25 12:39 AM, Henk Langeveld wrote:
On 03/25/2014 12:13 AM, Geoff Nordli wrote:
Is anyone is using SaltStack (http://www.saltstack.com/) on OmniOS.
If so, how you are getting it installed?
Hi Geoff,
I'm not using Salt, but according to the installation guide
(http
On 14-11-01 02:56 PM, Dan McDonald wrote:
On Oct 31, 2014, at 9:21 PM, Frédéric Alix admd...@gmail.com wrote:
Sure, go ahead... but do we really want to attract newbies?
I don't know, just asking.
Yes of course !
Theo already jumped in on this point, but both he and Frédéric are absolutely
On 14-12-22 11:24 AM, Rune Tipsmark wrote:
hi Dan,
tried that, get data file error.
I tried zfs list and found my snapshot
pool01/PHTVOL01@1419269859_repli_zfs_zfs20_nr_4
then stmfadm create-lu pool01/PHTVOL01@1419269859_repli_zfs_zfs20_nr_4
doesn't work... also tried pool01/PHTVOL01, no
On 15-03-05 07:08 PM, Paul B. Henson wrote:
From: Aaron Curry
Sent: Tuesday, March 03, 2015 3:45 PM
We have encountered an issue with out OmniOS CIFS file server and file locks.
We are currently actually using samba under omnios rather than the in-kernel
CIFS server. One reason is that the
On 15-03-06 11:30 AM, Dan McDonald wrote:
On Mar 6, 2015, at 2:16 PM, Geoff Nordli geo...@gnaa.net wrote:
It would be great if those SMB2 and fixes get upstreamed at some point.
All of the distro makers are busy... well... working on their distros. I certainly
am (r151014 with its pkg(5
On 15-03-06 11:51 AM, Paul B. Henson wrote:
From: Geoff Nordli
Sent: Friday, March 06, 2015 11:16 AM
Paul, when using Samba, can users restore files via the previous
versions within Windows to see all of the snapshots? Having an easy way
for people to restore files is a huge plus.
Yes, samba
On 15-03-06 01:18 PM, Geoff Nordli wrote:
On 15-03-06 11:51 AM, Paul B. Henson wrote:
From: Geoff Nordli
Sent: Friday, March 06, 2015 11:16 AM
Paul, when using Samba, can users restore files via the previous
versions within Windows to see all of the snapshots? Having an easy
way
for people
Hi.
I am migrating a couple of machines from OI to OmniOS.
Is it possible to install omnios into a new boot environment so I can
keep both the install of OI and then boot between them?
thanks,
Geoff
___
OmniOS-discuss mailing list
On 15-11-13 12:36 PM, Dan McDonald wrote:
On Nov 13, 2015, at 3:26 PM, Geoff Nordli <geo...@gnaa.net> wrote:
Hi.
I am migrating a couple of machines from OI to OmniOS.
Is it possible to install omnios into a new boot environment so I can keep both
the install of OI and then boot betwee
hings kept in
"binary" form from the OI root.
Dan Vâtca
CTO at Syneto
Tel: +40723604357, Skype: dan_vatca
<http://www.syneto.net/>
On Wed, Nov 18, 2015 at 10:05 PM, Geoff Nordli <geo...@gnaa.net
<mailto:geo...@gnaa.net>> wrote:
On 15-11-13 12:36 PM, Dan McDona
Hi.
What is the best way to remove/disable kvm from Omnos. It prevents
Virtualbox from grabbing the VT-x.
#pkg uninstall system/kvm
Creating Plan (Solver setup): /pkg uninstall: Cannot remove
'pkg://omnios/system/kvm@1.0.5.11,5.11-0.151016:20151112T214129Z' due to
the following packages
On 16-05-25 10:08 AM, Dan McDonald wrote:
The illumos SMB expert hangs out on here, but not always. If you don't get a
bite here soon, you may wish to query the illumos developer's list, where I
know he's always listening.
Dan
Hi Dan.
I think I will restructure my email and send it
On 16-05-24 03:41 PM, Geoff Nordli wrote:
I just upgraded a server from OI to OmniOS-r151018.
I am having a few issues with the connectivity to AD.
I was able to join the domain no problem, but then the domain is
getting disconnected and after several hours I need to join the domain
again
On 16-05-25 10:42 AM, Geoff Nordli wrote:
On 16-05-25 10:08 AM, Dan McDonald wrote:
The illumos SMB expert hangs out on here, but not always. If you
don't get a bite here soon, you may wish to query the illumos
developer's list, where I know he's always listening.
Dan
Hi Dan.
I think
On 16-05-30 07:24 PM, Gordon Ross wrote:
On Tue, May 24, 2016 at 6:52 PM, Geoff Nordli <geo...@gnaa.net> wrote:
On 16-05-24 03:41 PM, Geoff Nordli wrote:
I just upgraded a server from OI to OmniOS-r151018.
I am having a few issues with the connectivity to AD.
I was able to join the
Hi.
I have had good luck with the SuperStorage 6037R-E1R16L chassis with the
LSI 2308 IT mode HBA.
Thoughts on the
http://www.supermicro.com/products/system/3U/6038/SSG-6038R-E1CR16L.cfm.
It has the LSI 3008 HBA and Intel x540 network cards.
I want to get at least 4TB 3.5" SAS drives.
Is the NVMe interface reliable option now?
thanks,
Geoff
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
On 16-04-11 09:31 AM, Eric Sproul wrote:
On Sun, Apr 10, 2016 at 8:54 PM, Geoff Nordli <geo...@gnaa.net> wrote:
Is the NVMe interface reliable option now?
I've tested it, and it works great. However, a possible shortcoming
is that there is currently no hot-swap support for nvme(7D) d
On 16-04-11 12:15 PM, Bob Friesenhahn wrote:
On Mon, 11 Apr 2016, Geoff Nordli wrote:
On a mailing list people don't post their success that often so it
takes a while before you get enough feedback before you trust it.
There have been some postings regarding problems. The driver
On 16-03-19 01:28 PM, Richard Elling wrote:
On Mar 18, 2016, at 4:12 PM, Geoff Nordli <geo...@gnaa.net> wrote:
Hi.
I have had good luck with the SuperStorage 6037R-E1R16L chassis with the LSI
2308 IT mode HBA.
We have several similar servers. The X10DRH is fine. For a non-HA system,
, but they're fine
for installing the OS. Hot-swapping a failed device is tricky but
possible - I use nylon screws in case I drop one on the MB...
Kevin
On 03/21/2016 04:07 PM, Geoff Nordli wrote:
On 16-03-19 01:28 PM, Richard Elling wrote:
On Mar 18, 2016, at 4:12 PM, Geoff Nordli <geo...@gnaa.
Quick, question.
Any performance differences between 4Kn and 512e with ashift=12?
I am thinking there should not be, since they will both write the full
4K block size.
The workload will be virtual machines using a zvol.
thanks,
Geoff
___
AM, Matej Žerovnik wrote:
As far as I see, there are no 4Kn 4TB SAS drives, only 6TB.
From performance view, is there any different between 4Kn or 512e that is
formated with ashift=12?
Matej
On 19 Mar 2016, at 19:19, Geoff Nordli <geo...@gnaa.net> wrote:
I have had really goo
or
two drives died.
Matej
On 19 Mar 2016, at 00:12, Geoff Nordli <geo...@gnaa.net> wrote:
Hi.
I have had good luck with the SuperStorage 6037R-E1R16L chassis with the LSI
2308 IT mode HBA.
Thoughts on the
http://www.supermicro.com/products/system/3U/6038/SSG-6038R-E1CR16L.cfm.
Will the Joyent VND changes get merged into the next version of OmniOS?
It seems they were backed out the last time, and I haven't seen them
come back in again.
thanks,
Geoff
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
On 16-05-25 09:11 AM, Geoff Nordli wrote:
I just upgraded an OI server to Omniosr151018.
I am having some intermittent issues with the smb service with Windows
7 clients.
Does anyone have a dtrace script/suggestions to try to isolate it.
I am running wireshark one of the traces I have show
I just upgraded an OI server to Omniosr151018.
I am having some intermittent issues with the smb service with Windows 7
clients.
Does anyone have a dtrace script/suggestions to try to isolate it.
I am running wireshark one of the traces I have show SMB service
response time for NT Create
Nordli <geo...@gnaa.net> wrote:
On 2016-06-28 11:59 AM, John D Groenveld wrote:
In message <5772c723.80...@gnaa.net>, Geoff Nordli writes:
I am running OmniOS v11 r151018.
I have quite a few OI/Omnios OS boxes running Virtualbox. I haven't see
this before. On a new server I just in
On 2016-06-28 12:57 PM, Geoff Nordli wrote:
On 2016-06-28 12:23 PM, Dale Ghent wrote:
Is the vbox version you’re using on your new server different from
that which you are using on existing ones?
Are you compiling vbox on OmniOS, or using the pre-compiled Solaris
binaries from Oracle
.so`_Z18rtThreadNativeMainPv+0x51()
libc.so.1`_thrp_setup+0x8a(bf7fff125240)
libc.so.1`_lwp_start()
On 2016-06-29 09:32 AM, Geoff Nordli wrote:
Hi Frank.
I have quite a few servers that either run OpenIndiana or Omnios
systems and they all work well with with the Solaris binaries. I
haven't s
On 2016-06-28 06:18 PM, Dale Ghent wrote:
On Jun 28, 2016, at 8:25 PM, Geoff Nordli <geo...@gnaa.net> wrote:
On 2016-06-28 12:57 PM, Geoff Nordli wrote:
On 2016-06-28 12:23 PM, Dale Ghent wrote:
Is the vbox version you’re using on your new server different from that which
you are
Good news!!
Oracle fixed the problem and it works now with a test build (>= 108405).
On 2016-06-29 01:11 PM, Dale Ghent wrote:
On Jun 29, 2016, at 3:00 PM, Geoff Nordli <geo...@gnaa.net> wrote:
On 2016-06-28 06:18 PM, Dale Ghent wrote:
On Jun 28, 2016, at 8:25 PM, Geoff No
.
Dan
Sent from my iPhone (typos, autocorrect, and all)
On Oct 5, 2016, at 3:57 PM, Geoff Nordli <geo...@gnaa.net
<mailto:geo...@gnaa.net>> wrote:
Hi.
Do you think I will be able to upgrade from r151008 to r151014 LTS?
What about going to current stable of r151018?
t
Hi.
Do you think I will be able to upgrade from r151008 to r151014 LTS?
What about going to current stable of r151018?
thanks,
Geoff /
/
/
/
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
Hi.
When I try to upgrade to r151018 from r151016 it can't complete.
#pkg update
Creating Plan (Checking for conflicting actions): /
pkg update: The following packages deliver conflicting action types to
usr/share/man/man4/ssh_config.4:
link:
On 2016-09-21 11:50 AM, Dan McDonald wrote:
On Sep 21, 2016, at 2:40 PM, Geoff Nordli<geo...@gnaa.net> wrote:
Hi.
When I try to upgrade to r151018 from r151016 it can't complete.
#pkg update
Creating Plan (Checking for conflicting actions): /
pkg update: The following packages d
On 2016-10-05 04:32 PM, Dan McDonald wrote:
On Oct 5, 2016, at 7:03 PM, Geoff Nordli <geo...@gnaa.net> wrote:
Always a risk when you wait too long between versions.
We tested 006 --> 014 pre-release of 014. 008 --> 014 should be equally
workable.
Dan
Upgrade worked per
Hi.
I am running OmniOS v11 r151016
I tried to upgrade pkgsrc using the steps outlined here:
https://pkgsrc.joyent.com/install-on-illumos/
when I tried to upgrade pkgin it gives me this error:
root@pc-oi1:~# /opt/local/sbin/pkg_add -U pkgin
SSL support disabled
pkg_add: Can't process
On 2016-11-01 10:36 AM, Nahum Shalman wrote:
On Tue, Nov 1, 2016 at 1:32 AM, Geoff Nordli <geo...@gnaa.net
<mailto:geo...@gnaa.net>> wrote:
I am running OmniOS v11 r151016
You didn't mention which quarterly release of pkgsrc you were on.
I tried to upgrade pkgsrc usi
On 2016-12-01 12:35 AM, C. L. Martinez wrote:
Hi all,
I need a new NAS for my home :)) .. Due to old hardware supplied on HP
Microserver Gen8 (and it doesn't seems that HP release another model soon), I
would like to know if exists some alternative with similar features: low noise,
On 2017-03-23 08:53 PM, Dan McDonald wrote:
From he bounced file...
Sent from my iPhone (typos, autocorrect, and all)
Begin forwarded message:
We have a legacy billing app that writes thousand of files to an SMB share on
an OmniOS file server twice a month when we do billing. It had been
Forgot to mention that I am running r151020.
On 2017-03-29 10:13 AM, Geoff Nordli wrote:
Hi.
Anyone have any luck installing VBox 5.1 on Omnios?
I am missing:
IPS : system/library/gcc/gcc-c++-runtime or
system/library/gcc-45-runtime system/library/gcc/gcc-c-runtime or
system/library/gcc
On 2017-03-29 10:23 AM, Dan McDonald wrote:
On Mar 29, 2017, at 1:13 PM, Geoff Nordli <geo...@gnaa.net> wrote:
Hi.
Anyone have any luck installing VBox 5.1 on Omnios?
I am missing:
IPS : system/library/gcc/gcc-c++-runtime or system/library/gcc-45-runtime
system/library/gcc/gcc-c-r
On 2017-03-29 11:32 AM, Andy Fiddaman wrote:
On Wed, 29 Mar 2017, Geoff Nordli wrote:
; Hi.
;
; Anyone have any luck installing VBox 5.1 on Omnios?
;
; I am missing:
;
; IPS : system/library/gcc/gcc-c++-runtime or system/library/gcc-45-runtime
; system/library/gcc/gcc-c-runtime or system
I am doing some testing on r151020 with the LX Brand.
I downloaded the latest Centos7 image.
https://docs.joyent.com/public-cloud/instances/infrastructure/images/centos#centos-7-20161213
I logged in and I was able to do a yum update on the image so everything
looks good.
One thing I noticed
Hi.
I am looking at ordering a new 3U supermicro server. as an all-in one.
I have been using these recently:
https://www.supermicro.com/products/system/3U/6038/SSG-6038R-E1CR16L.cfm
It has the LSI 3008 HBA in IT mode.
Any other suggestions out there?
thanks,
Geoff
On 2017-03-07 09:35 PM, Stephan Budach wrote:
- Ursprüngliche Mail -
Von: "Dan McDonald" <dan...@omniti.com>
An: "Geoff Nordli" <geo...@gnaa.net>
CC: "omnios-discuss" <omnios-discuss@lists.omniti.com>
Gesendet: Mittwoch, 8. März
On 2017-05-18 01:06 PM, Dan McDonald wrote:
On May 18, 2017, at 3:55 PM, Geoff Nordli <geo...@gnaa.net> wrote:
Hi.
I upgraded to the latest r151022 version. The upgrade went fine, rebooted the
machine, then upgraded to the new loader.
When i rebooted after the loader upgrade,
happy to discuss this further, and would be quite interested to find a
less-expensive solution for large-scale file service for Macs. We can take it
off-list if it goes any further off topic.
Good luck,
Chris
Am 24.11.2017 um 03:56 schrieb Geoff Nordli <geo...@gnaa.net>:
Hi.
I have to supp
under
https://github.com/oposs/pkg.oetiker.ch-build/tree/master/build/samba4
disabling thumbnails preview helps speed up finder ...
http://osxdaily.com/2013/01/10/disable-finder-icon-thumbnails-previews-mac-os-x/
cheers Manuel
- Original Message -
From: "Geoff Nordli" <ge
Hi.
I have to support a few mac machines connecting to a few file shares
running Omnios.
They are reporting problems with the speed when using the "finder".
I see there is a netatalk package I can download and compile off of
sourceforge, which looks fairly current.
Any suggestions on the
?
thanks!!
On 2017-11-24 11:49 AM, Manuel Oetiker wrote:
hi Geoff
you should switch to https://omniosce.org
cheers Manuel
- Original Message -
From: "Geoff Nordli" <geo...@gnaa.net>
Cc: "omnios-discuss" <omnios-discuss@lists.omniti.com>
Sent: Frid
ing if Samba
should compile well with 5.5.
On 2017-11-24 12:44 PM, Andy Fiddaman wrote:
The package is now called just ‘gcc5’
gcc51 is there as a renamed package.
On 24 Nov 2017, at 20:28, Geoff Nordli <geo...@gnaa.net> wrote:
That is what I am currently running.
#cat /etc/rele
our build script under
https://github.com/oposs/pkg.oetiker.ch-build/tree/master/build/samba4
disabling thumbnails preview helps speed up finder ...
http://osxdaily.com/2013/01/10/disable-finder-icon-thumbnails-previews-mac-os-x/
cheers Manuel
- Original Message -
From: "Geoff N
Hi.
In case anyone else wants to go down this path, I was able to get the
Samba4 packages built on omnios from this repo:
https://github.com/oposs/pkg.oetiker.ch-build
The functions.sh file points to gcc-5.1.0, but there is only gcc-5
pkg.oetiker.ch-build/lib$ grep -i gcc functions.sh
/linux smb can talk to everyone ..
cheers Manuel
- Original Message -
From: "Geoff Nordli" <geo...@gnaa.net>
To: "Manuel Oetiker" <man...@oetiker.ch>
Cc: "omnios-discuss" <omnios-discuss@lists.omniti.com>
Sent: Friday, November 24, 2017 5
-previews-mac-os-x/
cheers Manuel
- Original Message -
From: "Geoff Nordli" <geo...@gnaa.net>
To: "omnios-discuss" <omnios-discuss@lists.omniti.com>
Sent: Friday, November 24, 2017 3:56:01 AM
Subject: [OmniOS-discuss] Best way to share files with Mac?
Hi.
I ha
What made you choose Samba vs the built-in SMB server?
Active Directory domain controller?
On 2017-11-24 08:40 AM, Manuel Oetiker wrote:
Hi Geoff
I have a mixed environment with mac/pc/linux smb can talk to everyone ..
cheers Manuel
- Original Message -
From: "Geoff Nordli&
On 2017-11-23 10:57 PM, Stephan Budach wrote:
Hi Geoff,
- Ursprüngliche Mail -
Von: "Geoff Nordli" <geo...@gnaa.net>
An: "omnios-discuss" <omnios-discuss@lists.omniti.com>
Gesendet: Freitag, 24. November 2017 03:56:01
Betreff: [OmniOS-discuss] Best
Hi.
Does anyone have any links to configuring Samba4 as an AD DC on
Omnios/Solaris?
thanks,
Geoff
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
Hi.
I use Linux as my desktop and run Virtualbox as the hypervisor.
I started playing with lxzones. First, I couldn't login to the Ubuntu
native container. I set the root password and then logged in via the
console. Then I couldn't get the zone to connect to the outside world.
I noticed
Hi.
I am trying to get the CIFS service in a zone working properly.
At this point everything works fine until I try to set share level
permissions.
I add the share: sharemgr add-share -r test -s /tank/fs1-data/test mygroup
I can connect to the share, etc...
I can't seem to set the share
75 matches
Mail list logo
