Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF
Hi Rajendra, Your Template seems to be ok. Please check your CM request. Can you share the error log? Sample CM request, { "version": "2.0", "type": "request", "correlation-id": "c09ac7d1-de62-0016-2000-e63701125557-201", "cambria.partition": "APPC", "rpc-name": "config-modify", "body": { "input": { "common-header": { "timestamp": "2019-05-14T11:44:51.36Z", "api-ver": "2.00", "originator-id": "849e6c6b420", "request-id": "23343221", "sub-request-id": "1126678956", "flags": { "mode": "NORMAL", "force": "TRUE", "ttl": 36000 } }, "action": "ConfigModify", "action-identifiers": { "vnf-id": "074e192d-8704-47c8-a910-682539e2e87d" }, "payload": "{\"request-parameters\":{\"vnf-host-ip-address\":\"10.12.6.0\"},\"configuration-parameters\":{\"status\":\"true\"}}" } } } In CDT you create the template with this parameters (highlighted in Yellow) and expect the values to be passed during runtime in CM request. If I understand correctly, in your scenario the payload should be something like, "{\"request-parameters\":{\"vnf-host-ip-address\":\"192.168.122.238\"},\"configuration-parameters\":{\" id_val \":\"01\",\" enabled_val \":\"true\"}}" However I’m not sure what ‘s the Netconf Message is. Its just a guess based on limited input available in the email. Thanks! Br, Lathish From: Rajendra P Mishra (RP) Sent: Tuesday, August 13, 2019 6:48 PM To: Lathishbabu Ganesan Cc: onap-discuss@lists.onap.org; CHO, TAKAMUNE Subject: Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF Lathish, thank you for the detailed answers. I modified my template based on your description, however it still fails. Can you share the template & request for ConfigModify if you have one. The request that I post on DMAAP. { "version": "2.00", "rpc-name": "config-modify", "correlation-id": "a20e2073-30b1-4357-893b-f5ed57b66ef0-10", "type": "request", "body": { "input": { "common-header": { "timestamp": "2019-08-13T15:25:00.44Z", "api-ver": "2.00", "originator-id": "PNF_TEST", "request-id": "PNF_USER_1", "sub-request-id": "cmodify", "flags": { "force": "TRUE", "ttl": 6 } }, "action": "ConfigModify", "action-identifiers": { "vnf-id": "PNF_device01" }, "payload": "{ \"vnf-host-ip-address\":\"192.168.122.238\", \"generic-vnf.vnf-id\": \"PNF_device01\", \"pg-streams\":{ \"pg-stream\": { \"id\":\"fw_udp1\", \"is-enabled\": \"true\"} } }" } } } ------- My CDT template. -- ${id_val} ${enabled_val} --- thanks, -RP On Tue, Aug 13, 2019 at 8:29 PM Lathishbabu Ganesan mailto:lathishbabu.gane...@ericsson.com>> wrote: Hi RP, For Netconf-XML, you no need URL. You need to fill in the USER_NAME, PASSWORD, PORT_NUMBER. APPC identifies the VNF/PNF from AAI or from the Config Modify Request. This will be configured during Design time in CDT. Please find the response below. Br, Lathish From: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> mailto:onap-discuss@lists.onap.org>> On Behalf Of Rajendra Prasad Mishra via Lists.Onap.Org<https://protect2.fireeye.com/url?k=7c97eeab-201e3487-7c97ae30-0cc4
Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF
Lathish, thank you for the detailed answers. I modified my template based on your description, however it still fails. Can you share the template & request for ConfigModify if you have one. The request that I post on DMAAP. { "version": "2.00", "rpc-name": "config-modify", "correlation-id": "a20e2073-30b1-4357-893b-f5ed57b66ef0-10", "type": "request", "body": { "input": { "common-header": { "timestamp": "2019-08-13T15:25:00.44Z", "api-ver": "2.00", "originator-id": "PNF_TEST", "request-id": "PNF_USER_1", "sub-request-id": "cmodify", "flags": { "force": "TRUE", "ttl": 6 } }, "action": "ConfigModify", "action-identifiers": { "vnf-id": "PNF_device01" }, "payload": "{ \"vnf-host-ip-address\":\"192.168.122.238\", \"generic-vnf.vnf-id\": \"PNF_device01\", \"pg-streams\":{ \"pg-stream\": { \"id\":\"fw_udp1\", \"is-enabled\": \"true\"} } }" } } } --- My CDT template. -- ${id_val} ${enabled_val} --- thanks, -RP On Tue, Aug 13, 2019 at 8:29 PM Lathishbabu Ganesan < lathishbabu.gane...@ericsson.com> wrote: > Hi RP, > > > > For Netconf-XML, you no need URL. You need to fill in the USER_NAME, > PASSWORD, PORT_NUMBER. APPC identifies the VNF/PNF from AAI or from the > Config Modify Request. > > This will be configured during Design time in CDT. > > > > Please find the response below. > > > > Br, > > Lathish > > > > *From:* onap-discuss@lists.onap.org *On > Behalf Of *Rajendra Prasad Mishra via Lists.Onap.Org > *Sent:* Tuesday, August 13, 2019 3:40 PM > *To:* CHO, TAKAMUNE > *Cc:* onap-discuss@lists.onap.org > *Subject:* Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command > fails on PNF > > > > Thanks Taka. That was helpful. > > > > I added the DEVICE_INTERFACE_PROTOCOL entry in the DB and it moved > further. > > > > Additionally, it was failing to identify the URL so I added the following > entry in DEVICE_AUTHENTICATION in appc db. I hope this is correct. > > > > update DEVICE_AUTHENTICATION set PASSWORD="netconf", URL="192.168.122.238" > where DEVICE_AUTHENTICATION_ID=55; > > > > MariaDB [sdnctl]> select * from DEVICE_AUTHENTICATION ; > > +--+--+-+--+---+--+-+-+ > | DEVICE_AUTHENTICATION_ID | VNF_TYPE | PROTOCOL| ACTION | > USER_NAME | PASSWORD | PORT_NUMBER | URL | > > +--+--+-+--+---+--+-+-+ > | 55 | vFW | NETCONF-XML | ConfigModify | > netconf | netconf | 830 | 192.168.122.238 | > > > > With all these changes I am able to move further. However, it still fails > to connect to the PNF simulator. > > I have a few questions. > > > > 1. How does CDT/APPC know about the URL for which we are doing the > ConfigModify action. There is no field in CDT to fill in the info. It only > asks for "Username" and "Port" in the CDT gui. > > *[Lathish] : This is done during the design time in CDT. After you enter > Username & Port. You have the option to define how the parameter values > will be filled during Runtime. Either manual or from AAI. If you set it as > Manual then, in the CM request you need to pass the > vnf-host-ip-address(VNF/PNF IP) in the payload.* > > > > 2. What is the expectation from the PNF/VNF for accepting the NETCONF-XML > protocol. Is there a way to verify whether PNF/VNF is listening for our > request. > > *[Lathish] : VNF/PNF with Netconf-xml protoc
Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF
Rajendra, CDT gives you the option to upload parameters list and the Netconf interface of the device. Look at https://docs.onap.org/en/latest/submodules/integration.git/docs/docs_scaleout.html section 1.5 for an example of how to use CDT with Netconf. Marco From: on behalf of Rajendra Prasad Mishra Reply-To: "onap-discuss@lists.onap.org" , "rpmis...@aarnanetworks.com" Date: Tuesday, August 13, 2019 at 10:43 AM To: "CHO, TAKAMUNE" Cc: "onap-discuss@lists.onap.org" Subject: Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF Thanks Taka. That was helpful. I added the DEVICE_INTERFACE_PROTOCOL entry in the DB and it moved further. Additionally, it was failing to identify the URL so I added the following entry in DEVICE_AUTHENTICATION in appc db. I hope this is correct. update DEVICE_AUTHENTICATION set PASSWORD="netconf", URL="192.168.122.238" where DEVICE_AUTHENTICATION_ID=55; MariaDB [sdnctl]> select * from DEVICE_AUTHENTICATION ; +--+--+-+--+---+--+-+-+ | DEVICE_AUTHENTICATION_ID | VNF_TYPE | PROTOCOL| ACTION | USER_NAME | PASSWORD | PORT_NUMBER | URL | +--+--+-+--+---+--+-+-+ | 55 | vFW | NETCONF-XML | ConfigModify | netconf | netconf | 830 | 192.168.122.238 | With all these changes I am able to move further. However, it still fails to connect to the PNF simulator. I have a few questions. 1. How does CDT/APPC know about the URL for which we are doing the ConfigModify action. There is no field in CDT to fill in the info. It only asks for "Username" and "Port" in the CDT gui. 2. What is the expectation from the PNF/VNF for accepting the NETCONF-XML protocol. Is there a way to verify whether PNF/VNF is listening for our request. 3. Currently I am posting the ConfigModify request on DMAAP. However, in the eventual scheme who triggers the LCM configModify ? How is it used with real VNF's ? 4. We have tested ModifyConfig with RESTCONF and closed loop. How can we use RESTCONF from CDT ? When I choose the RESTCONF protocol it fails (log says "Error occurred in processFlow java.lang.Exception: Don't know how to execute transaction ID 1). Do we need to do something different in case of RESTCONF and ConfigModify LCM in CDT/APPC. Below is the snippet of the log failure when we do ConfigModify with NETCONF-XML (The full log is attached) 2019-08-13T14:14:24,757 | INFO | appc-dispatcher-3 | GraphExecutor | 513 - org.onap.appc.flow.controller - 1.4.4 | NEW KEY = input.action-identifiers.vserver-id -- 2019-08-13T14:14:24,757 | INFO | appc-dispatcher-3 | GraphExecutor | 513 - org.onap.appc.flow.controller - 1.4.4 | NEW KEY = tmp.message -- Download Failure : 401 : com.jcraft.jsch.JSchException: java.net.ConnectException: Connection refused (Connection refused) 2019-08-13T14:14:24,757 | INFO | appc-dispatcher-3 | GraphExecutor | 513 - org.onap.appc.flow.controller - 1.4.4 | NEW KEY = config-template.config-file-id -- 1312 2019-08-13T14:14:24,757 | INFO | appc-dispatcher-3 | GraphExecutor | 513 - org.onap.appc.flow.controller - 1.4.4 | NEW KEY = input.action-identifiers.vnf-id -- PNF_device01 thanks, -RP On Mon, Aug 12, 2019 at 11:55 PM CHO, TAKAMUNE mailto:tc0...@att.com>> wrote: I saw: 2019-08-12T14:32:49,631 | DEBUG | appc-dispatcher-5 | CachedDataSource | 219 - org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | SQL Statement: SELECT * FROM DEVICE_INTERFACE_PROTOCOL WHERE vnf_type = 'vFW' ; 2019-08-12T14:32:49,635 | DEBUG | appc-dispatcher-5 | CachedDataSource | 219 - org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | SQL SUCCESS. rows returned: 0, time(ms): 4 2019-08-12T14:32:49,635 | DEBUG | appc-dispatcher-5 | DBResourceManager | 219 - org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | >> getData : dbhost 5 miliseconds. 2019-08-12T14:32:49,636 | DEBUG | appc-dispatcher-5 | SqlResource | 218 - org.onap.ccsdk.sli.adaptors.sql-resource-provider - 0.3.3 | No data found 2019-08-12T14:32:49,636 | ERROR | appc-dispatcher-5 | ConfigResourceNode | 509 - appc-config-data-services - 1.4.4 | Failed in getCommonConfigInfo org.onap.appc.data.services.node.QueryException: Unable to Read device_interface_protocol this should be fixed at https://jira.onap.org/browse/APPC-1593<https://urldefense.proofpoint.com/v2/url?u=https-3A__jira.onap.org_browse_APPC-2D1593&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=KgFIQiUJzSC0gUhJaQxg8eC3w16GC3sKgWIcs4iIee0&m=9MCaPSStjFBKB7i_hZ72ghwfVu04sTAvsoi_KPmvLD0&s=ZYS
Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF
Hi RP, For Netconf-XML, you no need URL. You need to fill in the USER_NAME, PASSWORD, PORT_NUMBER. APPC identifies the VNF/PNF from AAI or from the Config Modify Request. This will be configured during Design time in CDT. Please find the response below. Br, Lathish From: onap-discuss@lists.onap.org On Behalf Of Rajendra Prasad Mishra via Lists.Onap.Org Sent: Tuesday, August 13, 2019 3:40 PM To: CHO, TAKAMUNE Cc: onap-discuss@lists.onap.org Subject: Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF Thanks Taka. That was helpful. I added the DEVICE_INTERFACE_PROTOCOL entry in the DB and it moved further. Additionally, it was failing to identify the URL so I added the following entry in DEVICE_AUTHENTICATION in appc db. I hope this is correct. update DEVICE_AUTHENTICATION set PASSWORD="netconf", URL="192.168.122.238" where DEVICE_AUTHENTICATION_ID=55; MariaDB [sdnctl]> select * from DEVICE_AUTHENTICATION ; +--+--+-+--+---+--+-+-+ | DEVICE_AUTHENTICATION_ID | VNF_TYPE | PROTOCOL| ACTION | USER_NAME | PASSWORD | PORT_NUMBER | URL | +--+--+-+--+---+--+-+-+ | 55 | vFW | NETCONF-XML | ConfigModify | netconf | netconf | 830 | 192.168.122.238 | With all these changes I am able to move further. However, it still fails to connect to the PNF simulator. I have a few questions. 1. How does CDT/APPC know about the URL for which we are doing the ConfigModify action. There is no field in CDT to fill in the info. It only asks for "Username" and "Port" in the CDT gui. [Lathish] : This is done during the design time in CDT. After you enter Username & Port. You have the option to define how the parameter values will be filled during Runtime. Either manual or from AAI. If you set it as Manual then, in the CM request you need to pass the vnf-host-ip-address(VNF/PNF IP) in the payload. 2. What is the expectation from the PNF/VNF for accepting the NETCONF-XML protocol. Is there a way to verify whether PNF/VNF is listening for our request. [Lathish] : VNF/PNF with Netconf-xml protocol, you can do ssh to connect to the host and verify it. I can share the NETCONF message if you want. 3. Currently I am posting the ConfigModify request on DMAAP. However, in the eventual scheme who triggers the LCM configModify ? How is it used with real VNF's ? [Lathish] : It depends upon your use case. For now we have a use case where policy triggers CM. 4. We have tested ModifyConfig with RESTCONF and closed loop. How can we use RESTCONF from CDT ? When I choose the RESTCONF protocol it fails (log says "Error occurred in processFlow java.lang.Exception: Don't know how to execute transaction ID 1). Do we need to do something different in case of RESTCONF and ConfigModify LCM in CDT/APPC. [Lathish] : First you need to mount the node in APPC to trigger RESTCONF. I haven’t tried RESTCONF from APPC LCM. Below is the snippet of the log failure when we do ConfigModify with NETCONF-XML (The full log is attached) 2019-08-13T14:14:24,757 | INFO | appc-dispatcher-3 | GraphExecutor | 513 - org.onap.appc.flow.controller - 1.4.4 | NEW KEY = input.action-identifiers.vserver-id -- 2019-08-13T14:14:24,757 | INFO | appc-dispatcher-3 | GraphExecutor | 513 - org.onap.appc.flow.controller - 1.4.4 | NEW KEY = tmp.message -- Download Failure : 401 : com.jcraft.jsch.JSchException: java.net.ConnectException: Connection refused (Connection refused) [Lathish] : You get this error when APPC couldn’t establish the ssh connection with the node. Once you fill in the DEVICE_AUTHENTICATION with right values, it should work. 2019-08-13T14:14:24,757 | INFO | appc-dispatcher-3 | GraphExecutor | 513 - org.onap.appc.flow.controller - 1.4.4 | NEW KEY = config-template.config-file-id -- 1312 2019-08-13T14:14:24,757 | INFO | appc-dispatcher-3 | GraphExecutor | 513 - org.onap.appc.flow.controller - 1.4.4 | NEW KEY = input.action-identifiers.vnf-id -- PNF_device01 thanks, -RP On Mon, Aug 12, 2019 at 11:55 PM CHO, TAKAMUNE mailto:tc0...@att.com>> wrote: I saw: 2019-08-12T14:32:49,631 | DEBUG | appc-dispatcher-5 | CachedDataSource | 219 - org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | SQL Statement: SELECT * FROM DEVICE_INTERFACE_PROTOCOL WHERE vnf_type = 'vFW' ; 2019-08-12T14:32:49,635 | DEBUG | appc-dispatcher-5 | CachedDataSource | 219 - org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | SQL SUCCESS. rows returned: 0, time(ms): 4 2019-08-12T14:32:49,635 | DEBUG | appc-dispatcher-5 | DBResourceManager | 219 - org.onap.ccsdk.sli.core.
Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF
Hi RP, It looks like we can do a workaround by manually inserting a record into DB table DEVICE_INTERFACE_PROTOCOL table entry. We can follow the defect https://jira.onap.org/browse/APPC-1593 Let us try this one tomorrow. Regards Vivek On Mon, Aug 12, 2019 at 11:55 PM Taka Cho wrote: > I saw: > > > > 2019-08-12T14:32:49,631 | DEBUG | appc-dispatcher-5 | > CachedDataSource | 219 - > org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | SQL Statement: SELECT * > FROM DEVICE_INTERFACE_PROTOCOL WHERE vnf_type = 'vFW' ; > > 2019-08-12T14:32:49,635 | DEBUG | appc-dispatcher-5 | > CachedDataSource | 219 - > org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | SQL SUCCESS. rows > returned: 0, time(ms): 4 > > 2019-08-12T14:32:49,635 | DEBUG | appc-dispatcher-5 | > DBResourceManager| 219 - > org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | >> getData : dbhost 5 > miliseconds. > > 2019-08-12T14:32:49,636 | DEBUG | appc-dispatcher-5 | > SqlResource | 218 - > org.onap.ccsdk.sli.adaptors.sql-resource-provider - 0.3.3 | No data found > > 2019-08-12T14:32:49,636 | ERROR | appc-dispatcher-5 | > ConfigResourceNode | 509 - appc-config-data-services - 1.4.4 > | Failed in getCommonConfigInfo > > org.onap.appc.data.services.node.QueryException: Unable to Read > device_interface_protocol > > > > this should be fixed at https://jira.onap.org/browse/APPC-1593 in Dublin > release. > > > > Check the comment what Marco said in the JIRA ticket. > > > > Hope that helps. > > > > Taka > > > > *From:* onap-discuss@lists.onap.org *On > Behalf Of *Rajendra Prasad Mishra > *Sent:* Monday, August 12, 2019 12:07 PM > *To:* onap-discuss@lists.onap.org > *Subject:* [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command > fails on PNF > > > > Hi, > > I am trying to do ConfigModify LCM using CDT in ONAP CASABLANCA. I > am using a "PNF simulator" instead of VNF. > > When we POST the configModify command on DMAAP, APPC looks for the "vnf" > related information from AAI. > > To workaround that, we populated the PNF information in AAI. > > > > With above changes I am able to post the ConfigModify request to DMAAP, > and then APPC picks it up and processes it. > > However, APPC fails to complete the request. Below is the snippet of the > log. Looks like APPC failed at "GetAaiInfo" > > The full log is also attached. > > > > Taka, Marco and other members of APPC team, request your help. > > > > --- > > 2019-08-12T14:32:49,713 | INFO | appc-dispatcher-5 | FlowControlNode > | 513 - org.onap.appc.flow.controller - 1.4.4 | Executed all > the transaction successfully > 2019-08-12T14:32:49,713 | ERROR | appc-dispatcher-5 | FlowControlNode > | 513 - org.onap.appc.flow.controller - 1.4.4 | Error occurred > in processFlow > org.onap.ccsdk.sli.core.sli.SvcLogicException: DG Workflow GetAaiInfo not > found > at > org.onap.appc.flow.controller.node.FlowControlNode.processFlow(FlowControlNode.java:135) > ~[?:?] > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[?:?] > at > sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) > ~[?:?] > at > sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) > ~[?:?] > at java.lang.reflect.Method.invoke(Method.java:498) ~[?:?] > > > > > > I am trying to test ConfigModify LCM on a PNF using CDT. I have also > attached the ConfigModify request json file. > > > > thanks, > > -RP > > > > > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#18519): https://lists.onap.org/g/onap-discuss/message/18519 Mute This Topic: https://lists.onap.org/mt/32842361/21656 Group Owner: onap-discuss+ow...@lists.onap.org Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF
I saw: 2019-08-12T14:32:49,631 | DEBUG | appc-dispatcher-5 | CachedDataSource | 219 - org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | SQL Statement: SELECT * FROM DEVICE_INTERFACE_PROTOCOL WHERE vnf_type = 'vFW' ; 2019-08-12T14:32:49,635 | DEBUG | appc-dispatcher-5 | CachedDataSource | 219 - org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | SQL SUCCESS. rows returned: 0, time(ms): 4 2019-08-12T14:32:49,635 | DEBUG | appc-dispatcher-5 | DBResourceManager | 219 - org.onap.ccsdk.sli.core.dblib-provider - 0.3.3 | >> getData : dbhost 5 miliseconds. 2019-08-12T14:32:49,636 | DEBUG | appc-dispatcher-5 | SqlResource | 218 - org.onap.ccsdk.sli.adaptors.sql-resource-provider - 0.3.3 | No data found 2019-08-12T14:32:49,636 | ERROR | appc-dispatcher-5 | ConfigResourceNode | 509 - appc-config-data-services - 1.4.4 | Failed in getCommonConfigInfo org.onap.appc.data.services.node.QueryException: Unable to Read device_interface_protocol this should be fixed at https://jira.onap.org/browse/APPC-1593 in Dublin release. Check the comment what Marco said in the JIRA ticket. Hope that helps. Taka From: onap-discuss@lists.onap.org On Behalf Of Rajendra Prasad Mishra Sent: Monday, August 12, 2019 12:07 PM To: onap-discuss@lists.onap.org Subject: [onap-discuss] [APPC] [CDT] [PNF] ConfigModify LCM command fails on PNF Hi, I am trying to do ConfigModify LCM using CDT in ONAP CASABLANCA. I am using a "PNF simulator" instead of VNF. When we POST the configModify command on DMAAP, APPC looks for the "vnf" related information from AAI. To workaround that, we populated the PNF information in AAI. With above changes I am able to post the ConfigModify request to DMAAP, and then APPC picks it up and processes it. However, APPC fails to complete the request. Below is the snippet of the log. Looks like APPC failed at "GetAaiInfo" The full log is also attached. Taka, Marco and other members of APPC team, request your help. --- 2019-08-12T14:32:49,713 | INFO | appc-dispatcher-5 | FlowControlNode | 513 - org.onap.appc.flow.controller - 1.4.4 | Executed all the transaction successfully 2019-08-12T14:32:49,713 | ERROR | appc-dispatcher-5 | FlowControlNode | 513 - org.onap.appc.flow.controller - 1.4.4 | Error occurred in processFlow org.onap.ccsdk.sli.core.sli.SvcLogicException: DG Workflow GetAaiInfo not found at org.onap.appc.flow.controller.node.FlowControlNode.processFlow(FlowControlNode.java:135) ~[?:?] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[?:?] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) ~[?:?] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[?:?] at java.lang.reflect.Method.invoke(Method.java:498) ~[?:?] I am trying to test ConfigModify LCM on a PNF using CDT. I have also attached the ConfigModify request json file. thanks, -RP -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#18518): https://lists.onap.org/g/onap-discuss/message/18518 Mute This Topic: https://lists.onap.org/mt/32842361/21656 Group Owner: onap-discuss+ow...@lists.onap.org Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-