Nope, it should be sufficient with the IP address from the initiator. I tried using CHAP and still no workie :( Where in the logs can I see if the target is not sending targets?
Thanks for the help! On Jan 29, 3:50 pm, Mike Christie <micha...@cs.wisc.edu> wrote: > On 01/27/2010 09:13 AM, TomyOnRails wrote: > > > > > > > Hi guys, > > > I've been trying to figure this out for days now and still I'm not > > sure wth happens. I configured the target with openfiler, all good, > > but when trying to connect to with my CentOS v5.4 machine I just > > cannot get to it. The oddest thing is when I try the discovery method > > I get no errors at all: > > > [r...@xen01 ~]# iscsiadm -m discovery -t sendtargets -p > > 192.168.1.10:3260 -d10 > > iscsiadm: Max file limits 1024 1024 > > > iscsiadm: updating defaults from '/etc/iscsi/iscsid.conf' > > iscsiadm: updated > > 'discovery.sendtargets.iscsi.MaxRecvDataSegmentLength', '32768' => > > '32768' > > iscsiadm: updated 'node.startup', 'manual' => 'automatic' > > iscsiadm: updated 'node.session.auth.authmethod', 'None' => 'CHAP' > > iscsiadm: updated 'node.session.timeo.replacement_timeout', '120' => > > '120' > > iscsiadm: updated 'node.conn[0].timeo.login_timeout', '30' => '15' > > iscsiadm: updated 'node.conn[0].timeo.logout_timeout', '15' => '15' > > iscsiadm: updated 'node.conn[0].timeo.noop_out_interval', '5' => '5' > > iscsiadm: updated 'node.conn[0].timeo.noop_out_timeout', '5' => '5' > > iscsiadm: updated 'node.session.err_timeo.abort_timeout', '15' => '15' > > iscsiadm: updated 'node.session.err_timeo.lu_reset_timeout', '30' => > > '20' > > iscsiadm: updated 'node.session.initial_login_retry_max', '4' => '8' > > iscsiadm: updated 'node.session.cmds_max', '128' => '128' > > iscsiadm: updated 'node.session.queue_depth', '32' => '32' > > iscsiadm: updated 'node.session.iscsi.InitialR2T', 'No' => 'No' > > iscsiadm: updated 'node.session.iscsi.ImmediateData', 'Yes' => 'Yes' > > iscsiadm: updated 'node.session.iscsi.FirstBurstLength', '262144' => > > '262144' > > iscsiadm: updated 'node.session.iscsi.MaxBurstLength', '16776192' => > > '16776192' > > iscsiadm: updated 'node.conn[0].iscsi.MaxRecvDataSegmentLength', > > '262144' => '262144' > > iscsiadm: updated 'node.conn[0].iscsi.HeaderDigest', 'None' => 'None' > > iscsiadm: updated 'node.session.iscsi.FastAbort', 'Yes' => 'Yes' > > iscsiadm: starting sendtargets discovery, address 192.168.1.10:3260, > > iscsiadm: sendtargets discovery to 192.168.1.10:3260 using isid > > 0x00023d000000 > > iscsiadm: discovery timeouts: login 15, reopen_cnt 5, auth 45. > > iscsiadm: connecting to 192.168.1.10:3260 > > iscsiadm: connected local port 57141 to 192.168.1.10:3260 > > iscsiadm: connected to discovery address 192.168.1.10 > > iscsiadm: discovery session to 192.168.1.10:3260 starting iSCSI login > > on fd 3 > > iscsiadm: sending login PDU with current stage 1, next stage 3, > > transit 0x80, isid 0x00023d000000 exp_statsn 0 > > iscsiadm:> InitiatorName=iqn.1994-05.com.redhat:d0d2463f695 > > iscsiadm:> InitiatorAlias=localhost.localdomain > > iscsiadm:> SessionType=Discovery > > iscsiadm:> HeaderDigest=None > > iscsiadm:> DataDigest=None > > iscsiadm:> DefaultTime2Wait=0 > > iscsiadm:> DefaultTime2Retain=0 > > iscsiadm:> IFMarker=No > > iscsiadm:> OFMarker=No > > iscsiadm:> ErrorRecoveryLevel=0 > > iscsiadm:> MaxRecvDataSegmentLength=32768 > > iscsiadm: wrote 48 bytes of PDU header > > iscsiadm: wrote 260 bytes of PDU data > > iscsiadm: read 48 bytes of PDU header > > iscsiadm: read 48 PDU header bytes, opcode 0x23, dlength 142, data > > 0x2d14670, max 32768 > > iscsiadm: read 142 bytes of PDU data > > iscsiadm: read 2 pad bytes > > iscsiadm: finished reading login PDU, 48 hdr, 0 ah, 142 data, 2 pad > > iscsiadm: login current stage 1, next stage 3, transit 0x80 > > iscsiadm:> TargetPortalGroupTag=1 > > iscsiadm:> HeaderDigest=None > > iscsiadm:> DataDigest=None > > iscsiadm:> DefaultTime2Wait=2 > > iscsiadm:> DefaultTime2Retain=0 > > iscsiadm:> IFMarker=No > > iscsiadm:> OFMarker=No > > iscsiadm:> ErrorRecoveryLevel=0 > > iscsiadm: login response status 0000 > > iscsiadm: discovery login success to 192.168.1.10 > > iscsiadm: sending text pdu with CmdSN 1, exp_statsn 1 > > iscsiadm:> SendTargets=All > > iscsiadm: wrote 48 bytes of PDU header > > iscsiadm: wrote 16 bytes of PDU data > > iscsiadm: discovery process 192.168.1.10:3260 polling fd 3, timeout > > in 30.000000 seconds > > iscsiadm: discovery process to 192.168.1.10:3260 returned from poll, > > rc 1 > > iscsiadm: read 48 bytes of PDU header > > iscsiadm: read 48 PDU header bytes, opcode 0x24, dlength 0, data > > 0x2d14670, max 32768 > > iscsiadm: discovery session to 192.168.1.10:3260 received text > > response, 0 data bytes, ttt 0xffffffff, final 0x80 > > It looks like the target is just not returning any targets. > > For open filer, do you need to add the initiator's initiatorname to some > sort of ACL? -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
