I apologize for the long release cycle. It has been too long. I have put up a new open-iscsi release here: http://www.open-iscsi.org/bits/open-iscsi-2.0-873.tar.gz
Most notable new feature is support for Qlogic qla4xxx if you are using the 3.4 kernel. See section "5.1.2 Setting up a iface for a iSCSI offload card" for details on how to set it up. If you have used be2iscsi/cxgb*i/bnx2i or software iscsi with iscsi ifaces then the setup will be similar. Note that if you are using qla4xxx for your boot/root disk then you will want to use the default value for qla4xxx's ql4xdisablesysfsboot modparam. You can use iscsiadm/iscsid for non root/boot disks then. This is needed because most distros do not have iscsiadm/iscsid boot support for qla4xxx. You can also use iscsiadm to setup the networking with be2iscsi in the 3.4 kernel (VLAN setup with iscsiadm is not yet supported with be2iscsi due to a last minute bug). -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.