Hello all,
I tried a simple test:
1. Installed an iSCSI target. I tried this with both IET
(iscsitarget.sourceforge.net) and tgt (apt-get install tgt).
2. Created a 2GB file to use as the target.
3. Connected to the target with iscsiadm.
4. Ran the following command to test read throughput: dd
On Mon, Jan 12, 2009 at 11:48 AM, avis...@gmail.com wrote:
Here are some statistics from wireshark:
Bad checksum(TCP): 35,963
Usually this means that Wireshark was unable to capture all packets,
not that there was a problem with the packets themselves.
Bart.