Hi Bart,
At the moment this is only a proof of concept wich seems to be working
fine.
I had some thoughts about it:
* The iSCSI target should not run in Write-Back mode
* DRBD should run in synchronus mode (protocol C)
* I should use the failover policy with dm-multipath instead of
round-robin.
On Fri, May 29, 2009 at 5:21 PM, Wido wrote:
> Last night i had the idea of building a multipath iSCSI setup with DRBD
> in Primary/Primary.
> [ ... ]
> Is my setup a possibility or should i stay with the old regular setup of
> a Primary/Standy with heartbeat?
I strongly recommend you to use a p
Hi Mike,
Yes indeed, that worked!
For the record, my ietd.conf
Target iqn.2007-04.nl.pcextreme:ha
Lun 0 Path=/dev/data/lun0,Type=fileio,ScsiId=nWFKhBCMq56JfSzq
Lun 1 Path=/dev/data/lun1,Type=fileio,ScsiId=wrOhZ1hVFANuQOJM
Lun 2 Path=/dev/data/lun2,Type=fileio,ScsiId=pW8e
Wido wrote:
> Hello,
>
> Last night i had the idea of building a multipath iSCSI setup with
> DRBD in Primary/Primary.
>
> My idea was/is:
>
> I have two machines with a 30GB partition wich is synced via DRBD (i
> assume everybody here is familiar with DRBD).
>
> My DRBD is running fine both m
Hello,
Last night i had the idea of building a multipath iSCSI setup with
DRBD in Primary/Primary.
My idea was/is:
I have two machines with a 30GB partition wich is synced via DRBD (i
assume everybody here is familiar with DRBD).
My DRBD is running fine both machines are UpToDate and they are