Thanks for your help, Mike. On Thu, 2009-10-29 at 13:06 -0500, Mike Christie wrote: > Is this fsck is started from the init scripts during boot up? If so, the > reason for the hang is probably that iscsid is not up and cannot handle > the connection error. For fedora/RHEL, I think we did some hack where if > network storage is used we delayed the fsck from the init boot scripts.
iscsi daemon was up... see the detail boot message below > > Not sure about the reaosn for the conn error. Can you turn on debugging? how ? it is just the first reboot. Is there a kernel command line option that I can specify ? ---------------------- Detailed boot message ----------------------- Boot logging started on /dev/hvc0(/dev/console) at Mon Oct 26 21:24:47 2009 NET: Registered protocol family 17 [NETWORK] using interface eth0 [NETWORK] using static config based on ip=9.3.103.95::9.3.103.1:255.255.255.0:9.3.103.95:eth0:none Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) FATAL: Module iscsi_ibft not found. Starting iSCSI daemon Logging in to [iface: default, target: iqn.1986-03.com.ibm:sn.118060811, portal: 9.3.111.253,3260] eth0: link up, 10Gbps, full-duplex scsi1 : iSCSI Initiator over TCP/IP scsi 1:0:0:0: Direct-Access NETAPP LUN 0.2 PQ: 0 ANSI: 4 sd 1:0:0:0: [sde] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:0: [sde] Write Protect is off sd 1:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sde] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:0: [sde] Write Protect is off sd 1:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sde2 sd 1:0:0:0: [sde] Attached SCSI disk scsi 1:0:0:1: Direct-Access NETAPP LUN 0.2 PQ: 0 ANSI: 4 sd 1:0:0:1: [sdf] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:1: [sdf] Write Protect is off sd 1:0:0:1: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:1: [sdf] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:1: [sdf] Write Protect is off sd 1:0:0:1: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sdf2 sd 1:0:0:1: [sdf] Attached SCSI disk scsi 1:0:0:2: Direct-Access NETAPP LUN 0.2 PQ: 0 ANSI: 4 sd 1:0:0:2: [sdg] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:2: [sdg] Write Protect is off sd 1:0:0:2: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:2: [sdg] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:2: [sdg] Write Protect is off sd 1:0:0:2: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sdg2 sd 1:0:0:2: [sdg] Attached SCSI disk scsi 1:0:0:3: Direct-Access NETAPP LUN 0.2 PQ: 0 ANSI: 4 sd 1:0:0:3: [sdh] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:3: [sdh] Write Protect is off sd 1:0:0:3: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:3: [sdh] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:3: [sdh] Write Protect is off sd 1:0:0:3: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdh: sdh1 sdh2 sd 1:0:0:3: [sdh] Attached SCSI disk scsi 1:0:0:4: Direct-Access NETAPP LUN 0.2 PQ: 0 ANSI: 4 sd 1:0:0:4: [sdi] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:4: [sdi] Write Protect is off sd 1:0:0:4: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:4: [sdi] 41943040 512-byte hardware sectors: (21.4GB/20.0GiB) sd 1:0:0:4: [sdi] Write Protect is off sd 1:0:0:4: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdi: sdi1 sdi2 sd 1:0:0:4: [sdi] Attached SCSI disk Login to [iface: default, target: iqn.1986-03.com.ibm:sn.XXXXXX, portal: X.X.XXX.XXX,3260]: successful Waiting for device /dev/disk/by-id/scsi-360a98000486e5a76464a53614a394461-part2 to appear: ok fsck 1.41.1 (01-Sep-2008) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/disk/by-id/scsi-360a98000486e5a76464a53614a394461-part2 /dev/disk/by-id/scsi-360a98000486e5a76464a53614a394461-part2: recovering journal connection1:0: detected conn error (1011) /dev/disk/by-id/scsi-360a98000486e5a76464a53614a394461-part2: clean, 154441/1310720 files, 1022000/5235168 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/disk/by-id/scsi-360a98000486e5a76464a53614a394461-part2 mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-360a98000486e5a76464a53614a394461-part2 /root kjournald starting. Commit interval 5 seconds EXT3 FS on sdi2, internal journal EXT3-fs: mounted filesystem with ordered data mode. mount: can't find /root/proc in /etc/fstab or /etc/mtab INIT: version 2.86 booting iscsi: can not broadcast skb (-3) connection1:0: detected conn error (1011) ------------- > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---