[EMAIL PROTECTED] wrote: > Hi. I'm getting the following whenever I write a substantial amount: > > Feb 1 09:48:04 fraunhofer kernel: [62669.987811] connection1:0: > iscsi: detected conn error (1012) > Feb 1 09:48:04 fraunhofer kernel: [62670.233507] sd 6:0:0:0: [sdc] > Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK > Feb 1 09:48:04 fraunhofer kernel: [62670.233518] end_request: I/O > error, dev sdc, sector 445116631 > Feb 1 09:48:04 fraunhofer kernel: [62670.233527] printk: 127 messages > suppressed. > Feb 1 09:48:04 fraunhofer kernel: [62670.233532] Buffer I/O error on > device sdc1, logical block 55639571 > Feb 1 09:48:04 fraunhofer kernel: [62670.233570] lost page write due > to I/O error on sdc1 > > The target is a REO 4000 which previously worked fine w/ Redat's cisco > based driver. Reading works fine with open-iscsi. Can someone help > me interpret? Am I supposed to have set up the buffer somehow? >
The target is sending what the initiator thinks is a bad sequence number. The linux-iscsi driver (Red Hat's cisco driver), did not check that value, so you would not have hit the problem. In the test version of the open-iscsi, there is a change to this code, but I do not think it is going to help you. You can try it out here: http://open-iscsi.org/bits/open-iscsi-2.0-868-test1.tar.gz If that does not work, could you send a wireshark trace and the log output? Build the driver with extra debugging on by doing make DEBUG_SCSI=1 DEBUG_TCP=1 make DEBUG_SCSI=1 DEBUG_TCP=1 install --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
