Nick wrote:
On Sep 30, 8:16 am, Konrad Rzeszutek [EMAIL PROTECTED] wrote:
On Mon, Sep 29, 2008 at 05:50:17PM -0700, Nick wrote:
On Sep 29, 3:49 pm, Konrad Rzeszutek [EMAIL PROTECTED] wrote:
Here's the output:
[EMAIL PROTECTED] ~]# lsscsi
[20:0:0:0] tapeSEAGATE ULTRIUM06242-XXX 1613
On Sep 30, 8:16 am, Konrad Rzeszutek [EMAIL PROTECTED] wrote:
On Mon, Sep 29, 2008 at 05:50:17PM -0700, Nick wrote:
On Sep 29, 3:49 pm, Konrad Rzeszutek [EMAIL PROTECTED] wrote:
Here's the output:
[EMAIL PROTECTED] ~]# lsscsi
[20:0:0:0] tape SEAGATE ULTRIUM06242-XXX 1613
On Sun, Sep 28, 2008 at 06:58:36AM -0700, Nick wrote:
I'm trying to use open-iscsi to connect to an iSCSI-based tape
library. The library has two drives, so there are three IDs.
Unfortunately, the library is picky about having the same SCSI IDs as
are configured directly on the library,
On Sep 28, 8:58 am, Nick [EMAIL PROTECTED] wrote:
I'm trying to use open-iscsi to connect to an iSCSI-based tape
library. The library has two drives, so there are three IDs.
Unfortunately, the library is picky about having the same SCSI IDs as
are configured directly on the library, which
On Sep 29, 10:29 am, [EMAIL PROTECTED] wrote:
On Sep 28, 8:58 am, Nick [EMAIL PROTECTED] wrote:
I'm trying to use open-iscsi to connect to an iSCSI-based tape
library. The library has two drives, so there are three IDs.
Unfortunately, the library is picky about having the same SCSI IDs
On Sep 29, 9:03 am, Konrad Rzeszutek [EMAIL PROTECTED] wrote:
On Sun, Sep 28, 2008 at 06:58:36AM -0700, Nick wrote:
I'm trying to use open-iscsi to connect to an iSCSI-based tape
library. The library has two drives, so there are three IDs.
Unfortunately, the library is picky about
Those look helpful, but the issue is that these seem to only take a
single id and lun and don't let you specify the host bus on which
these devices are located. I suppose I could try presenting them on
the same ID (same iSCSI Target) with different LUNs, then all I'd have
to do is set dt_id to 0
On Sep 29, 3:49 pm, Konrad Rzeszutek [EMAIL PROTECTED] wrote:
Here's the output:
[EMAIL PROTECTED] ~]# lsscsi
[20:0:0:0] tape SEAGATE ULTRIUM06242-XXX 1613 /dev/st0
[21:0:0:0] mediumx STK L20 0215 /dev/sch0
[22:0:0:0] tape SEAGATE ULTRIUM06242-XXX 1613
