Direct client requirement :: Network Engineer :: Brooklyn, NY
Hello, Please go through the below requirement and let me know on recrui...@tcagroupmail.com if you have comfortable Resources or not. Role: Network Engineer Duration: Above 8 months Location: Brooklyn, NY 11201 Only Candidates with GC/EAD-GC/USC SCOPE OF SERVICES: · Research, evaluate and recommend network architecture solutions based on performance, stability, availability, cost-efficiency, and development requirements needed to assist new applications and the users in E9-1-1n call taking and dispatch environment; · Collaborate with and advise colleagues on policies and procedures, technical problem resolution, and best practices for network infrastructure design and implementation; · Consult with and advise users of various technology infrastructure designs and architecture models; generate conceptual, logical, and physical network architectures, test plans, requirements, use cases, interface control documents, and risk assessments to ensure the design and delivery of network LAN/WAN architecture that conforms to application and user requirements; assist project management with the design, procurement, installation, cutover, and reporting activities; · Develop and coordinate system lifecycle management with ITSM including developing or reviewing asset, configuration, change, and security for network system; research and analyze significant and complex network problems; and perform special projects and initiatives as assigned. Deliverables: · Network Device Cabling and port assignments. · Network cabinet configuration and rack elevation diagrams. · Document PSAC2 network device naming convention and device names (device usernames). · Document PSAC2 IPv4 address. · Document PSAC2 IPv6 address. Document PSAC2 VESTA and ECTP2 VLAN. · Update Layer 2 and Layer 3 Visio diagrams. · PSAC2 network engineering document. · Document Test Report. · Follow up on all required network task assign from the various work steams. MANDATORY SKILLS/EXPERIENCE: · At least 8 years of experience with data center and enterprise LAN and WAN planning, design, implementation (builds and expansion), security, and management. · Experience with OSI Layer 1 (L1) through L7 protocols. · Experience with Cisco and other vendor routers, switches, firewalls, IPSs, test tool installation, configuration, troubleshooting, and management. · Experience with rack/cabinet configuration and elevation diagrams. · Experience with Cisco IOS release and Cisco ASR router platforms, Cisco ISR router platforms, Cisco Nexus 7000 and 7700 series platforms, Cisco Nexus 3000 series platforms, ASA firewalls, IPS, load balancers, Catalyst 6500 series platforms, Catalyst 4700 series platforms, Catalyst 3800 series platforms. · Experience with network test tools, testing procedures and execution, and reporting. · A thorough understanding of IPv4 and IPv6 unicast and multicast routing, routed and routing protocols, their limitations and constraints, as well as network services, protocols, and applications. · Experience with IPv4/ IPv6 technologies and routing to include OPSFv2 and OSPFv), EIGRP, BGP/MPLS, OTV/VDC layer 2 extension, vPC, PIM Sparse-dense mode/IGMP, HSRP, H.323, SIP, MGCP, SCCP hardware and software, EtherChannel, PortChannel, STP, Rapid PVST+, PortFast, LACP, and other STP protocols. · Experience with the execution of installation and maintenance of network software and hardware. · Experience with writing end-to-end network documentation and writing technical engineering documents, Engineering Troubleshooting Guide, and certification documents. · Ability to develop and execute test plans and procedures to certify hardware, software, and services. · Ability to identify and troubleshoot issues, determine the root cause of problems, and resolve problems/issues. · Experience with capacity planning, proof of concept testing and certification. · Understanding with full FCAP functions and ITIL set of best practices. Experience with validating network management tools and features. DESIREABLE SKILLS/EXPERIENCE: · Self-starter with good interpersonal skills, team player, good oral and written communication, and consulting network services. · Ability to work in cross functional teams; excellent attention to detail. · Candidate should be highly
Direct Client Requirement :: Network Engineer :: Brooklyn, NY :: About 24 months
Hello, Please go through the below requirement and let me know on recrui...@tcagroupmail.com if you have comfortable Resources or not. Role: Network Engineer Duration: About 24 months Location: Brooklyn, NY Interview: Face to Face ***Only Local Candidates with GC/EAD-GC/USC*** Job Description: Key Relationships: Interfaces with WAN support, LAN support, network integrators, DOE network engineers, Project Connect network engineers and other support teams to oversee that compliance and direction are maintained with the placement of network hardware into the overall DOE enterprise topology. Responsibilities: · Maintain and support a large enterprise network connecting a citywide environment of over 1200 locations. · Candidate must be able to support day to day operations that include routing, switching, firewalls, wireless, and VPN. · Work closely with the Network Operations Center to troubleshoot and resolve complex network issues. · Perform day-to-day network administration tasks including network equipment installation, configuration, upgrades, testing and troubleshooting. · Candidate will provide WAN support for initiatives that revolve around our optical backbone. · Engineer will be responsible for maintenance and support of network technologies that sustain data center operations. · Engineer must be able to configure load balancing for internal and external facing DOE applications. · Collaborate with various departments representing the network support team to design, test, and implement proposed solutions. · Provide periodic network traffic and security status reports. · Prepare network diagrams, floor plans, and schematics using Visio where required. · Respond to emergency calls in the evenings and on weekends regarding WAN / LAN outages. Certification Requirements: Minimum: · Cisco Certified Network Professional (CCNP) Strongly Preferred: · EVPL provisioning and troubleshooting. · Cisco ASA, router and switch product line, including Nexus · A baccalaureate degree from an accredited college, and eight years of satisfactory full-time (not classroom based) experience in VoIP architecture and design, wide area network planning, design, configuration, installation, troubleshooting, integration, performance monitoring, maintenance, enhancement, and security management; or · A master’s degree in computer science or a related field from an accredited college may substitute for one year of experience. However, all candidates must have at least eight years of satisfactory (not classroom based) full-time information technology experience as described in “1” above. Experience and Skillsets · Expertise and significant hands-on experience working with large LAN/WAN infrastructure and all LAN and WAN networking technologies Knowledge of communication protocols and Cisco communication equipment. · Hands-on experience and expertise with Cisco Nexus family of switches, Cisco Catalyst Switches 6xxx, 5xxx, 4xxx, 29xx, 19xx, RSM; Cisco Routers 7500, 7200, 4000, 3600, 2600, 2500, 800; Cisco VPN 3000. Networking protocols and standards: · Ethernet, Frame Relay, T1, T3, ISDN; Routing protocols (RIPv2, EIGRP, OSPF, BGP); and Firewall technology (PIX), · Virtual Private Networks, Voice over IP, Class of service and quality of service and traffic flow classification. · Excellent analytical and organizational skills and attention to detail. · Excellent communication (verbal and written) skills in preparing reports, presentations and documentation. · Ability to verbally translate and articulate complex technical issues for the advocacy of non-technical users. · Experience with SONET architecture and deployment using DWDM technology and monitoring tools. · Experience in Virtualization and storage network technologies. Thanks, Shalin TCA Consulting Group Inc. recrui...@tcagroupmail.com Mobile: 704-954-8008 -- You received this message because you are subscribed to the Google Groups "Open Source Erp & Crm" group. To unsubscribe from this group and stop receiving emails from it, send an email to open-source-erp-crm+unsubscr...@googlegroups.com. To post to this group, send email to open-source-erp-crm@googlegroups.com. Visit this group at https://groups.google.com/group/open-source-erp-crm. For more options, visit https://groups.google.com/d/optout.
Direct Client Requirement :: Network Engineer :: Brooklyn, NY
Hello, Please go through the below requirement and let me know on recrui...@tcagroupmail.com if you have comfortable Resources or not. Role: Network Engineer Duration: About 24 months Location: Brooklyn, NY Only Local Candidates with GC/EAD-GC/USC Job Description: Under the oversight of the Director of Service Delivery and Network Operations, with broad scope for the exercise of independent initiative and judgment, the Router/Switch Field Engineer is responsible for evaluating, implementing, testing, and documenting of all projects, as well as performing problem isolation and resolution, optimization, and propagation of standards for maintaining a complex range of computer network components and systems. He or she as a team member of Service Delivery and Network Support will provide remote site support for administrative and instructional arms of the DOE network. He/she will interface with various support groups, both internal external to Division of Instructional & Information Technology (DIIT), DoE partners, and vendors to oversee that compliance and direction are maintained within the DoE enterprise network. Reports to: Manager of Network Support. Key Relationships: Interfaces with WAN support, LAN support, Network Integrators, DOE network engineers, Project Connect network engineers and other support teams to oversee that compliance and directions are maintained with the placement of network hardware and all associated platforms and components connecting to all network hardware. Responsibilities: · Primarily provide remote site support for the integration of network equipment via circuit provisioning and testing. Duties will also include the following: · Design and implementation of complex network projects to address and resolve business needs of DOE. · Perform network modification projects in relation to DoE Wide Area Network (WAN), DoE enterprise data centers that include routing protocol configuration changes, router/switch configuration, and firewall/VPN configuration. · Meet with and collect data from various departments and agencies in the creation of practical network modifications for design, development, testing and eventual implementation in the production environment. · Create change requests for configuration changes on routers, switches and firewalls etc. · Performs day-to-day network administration tasks including network equipment maintenance, application and network troubleshooting utilizing packet traces. · Utilizes monitoring, performance analysis, network management, software and hardware equipment to troubleshoot and isolate problems, gauge network performance, and trace data and protocol activity. · Provides periodic network inventory reports, bandwidth utilization and security status reporting. · Prepare network diagrams, floor plans and schematics using Microsoft Visio. · Supports and maintains DoE optical backbone comprising DWDM and Synchronous Optical Networking (SONET) environment. · Responds evenings and weekends to emergency calls regarding critical network outages. Certification Requirements: Experience and Skillsets: · Deep understanding in networking technologies related to all layers of the TCP/IP stack. · Strong experience in routing and switching protocols such as BGP, EIGRP, OSPF, RIP, STP, Etherchannel and Trunking. · Expertise and significant hands-on experience working with large LAN/WAN infrastructure and all LAN and WAN networking technologies. · Hands-on experience and expertise with Cisco Catalyst Switches 6500, 4500, 3550; Cisco Routers 7500, 7200, 3845, 2900, 800. · Excellent understanding of VPN and related protocols - site to site, client, IPSEC (including the protocol suite), IKE, tunnel modes, SSL clientless/ Anyconnect, Tunnels between ASAs, Routers. · Experience with Local Load Balancers Cisco CSS/ACE/GSS, F5 BigIP LTM. · Experience in technical documentation including network drawings using Microsoft Visio. · Excellent analytical and organizational skills and attention to detail. · Excellent verbal and written communication skills in preparation of reports, presentations and documentation. · Ability to verbally translate and articulate complex technical issues for the efficacy of non-technical users. · Experience in the development of technology standards for Architecture, Design and Implementation. Networking protocols and standards: · CCNP certification 1.
Direct Client Requirement :: Network Engineer :: Brooklyn, NY
Hello, Please go through the below requirement and let me know on recrui...@tcagroupmail.com if you have comfortable Resources or not. Role: Network Engineer Duration: About 24 months Location: Brooklyn, NY Only Local Candidates with GC/EAD-GC/USC Job Description: Reports to: Manager of Network Support. Key Relationships: Interfaces with WAN support, LAN support, Network Integrators, DOE network engineers, Project Connect network engineers and other support teams to oversee that compliance and directions are maintained with the placement of network hardware and all associated platforms and components connecting to all network hardware. Responsibilities: · Primarily provide remote site support for the integration of network equipment via circuit provisioning and testing. Duties will also include the following: · Design and implementation of complex network projects to address and resolve business needs of DOE. · Perform network modification projects in relation to DoE Wide Area Network (WAN), DoE enterprise data centers that include routing protocol configuration changes, router/switch configuration, and firewall/VPN configuration. · Meet with and collect data from various departments and agencies in the creation of practical network modifications for design, development, testing and eventual implementation in the production environment. · Create change requests for configuration changes on routers, switches and firewalls etc. · Performs day-to-day network administration tasks including network equipment maintenance, application and network troubleshooting utilizing packet traces. · Utilizes monitoring, performance analysis, network management, software and hardware equipment to troubleshoot and isolate problems, gauge network performance, and trace data and protocol activity. · Provides periodic network inventory reports, bandwidth utilization and security status reporting. · Prepare network diagrams, floor plans and schematics using Microsoft Visio. · Supports and maintains DoE optical backbone comprising DWDM and Synchronous Optical Networking (SONET) environment. · Responds evenings and weekends to emergency calls regarding critical network outages. Certification Requirements: Experience and Skillsets: · Deep understanding in networking technologies related to all layers of the TCP/IP stack. · Strong experience in routing and switching protocols such as BGP, EIGRP, OSPF, RIP, STP, Etherchannel and Trunking. · Expertise and significant hands-on experience working with large LAN/WAN infrastructure and all LAN and WAN networking technologies. · Hands-on experience and expertise with Cisco Catalyst Switches 6500, 4500, 3550; Cisco Routers 7500, 7200, 3845, 2900, 800. · Excellent understanding of VPN and related protocols - site to site, client, IPSEC (including the protocol suite), IKE, tunnel modes, SSL clientless/ Anyconnect, Tunnels between ASAs, Routers. · Experience with Local Load Balancers Cisco CSS/ACE/GSS, F5 BigIP LTM. · Experience in technical documentation including network drawings using Microsoft Visio. · Excellent analytical and organizational skills and attention to detail. · Excellent verbal and written communication skills in preparation of reports, presentations and documentation. · Ability to verbally translate and articulate complex technical issues for the efficacy of non-technical users. · Experience in the development of technology standards for Architecture, Design and Implementation. Networking protocols and standards: · CCNP certification 1. A baccalaureate degree from an accredited college, and two years of satisfactory full-time (not classroom based) experience in wide area network planning, design, configuration, installation, troubleshooting, integration, performance monitoring, maintenance, enhancement, and security management; or 2. A four-year high school diploma or its educational equivalent and six years of satisfactory full-time (not classroom based) information technology experience of which at least 2 years must have been as described in “1” above; or A master’s degree in computer science or a related field from an accredited college may substitute for one year of experience. However, all candidates must have at least one year of satisfactory (not classroom based) full-time information technology experience as described in “1” above. Thanks, Shalin TCA
Direct Client Requirement :: Network Engineer :: Brooklyn, NY
Hello, Please go through the below requirement and let me know on recrui...@tcagroupmail.com if you have comfortable Resources or not. Role: Network Engineer Duration: About 24 months Location: Brooklyn, NY Only Local Candidates with GC/EAD-GC/USC Job Description: The New York City Department of Education (NYCDOE) seeks two Level III WAN Network Engineers that will work under the direction of the Manager of Network Support, with broad scope for the exercise of independent initiative and judgment. The candidate selected will be responsible for design and implementation of network devices and connectivity to our administrative and instructional arms of the DOE enterprise network. He will support the operation of the network infrastructure through coordination with support teams, internal customer technicians and engineers, ensuring that the network infrastructure continues to function at optimal performance. The Router/Switch Engineer will maintain all highly technical network infrastructure hardware devices in compliance with defined architectures governed by the Architecture Standards Team. He will Interface with WAN support, LAN support, network integrators, DOE network engineers, Project Connect network engineers, and other support teams to oversee that compliance and direction are maintained with the placement of network hardware into the overall DOE enterprise topology. Key Relationships: Interfaces with WAN support, LAN support, network integrators, DOE network engineers, Project Connect network engineers and other support teams to oversee that compliance and direction are maintained with the placement of network hardware into the overall DOE enterprise topology. Responsibilities: · Maintain and support a large enterprise network connecting a citywide environment of over 1200 locations. · Candidate must be able to support day to day operations that include routing, switching, firewalls, wireless, and VPN. · Work closely with the Network Operations Center to troubleshoot and resolve complex network issues. · Perform day-to-day network administration tasks including network equipment installation, configuration, upgrades, testing and troubleshooting. · Candidate will provide WAN support for initiatives that revolve around our optical backbone. · Engineer will be responsible for maintenance and support of network technologies that sustain data center operations. · Engineer must be able to configure load balancing for internal and external facing DOE applications. · Collaborate with various departments representing the network support team to design, test, and implement proposed solutions. · Provide periodic network traffic and security status reports. · Prepare network diagrams, floor plans, and schematics using Visio where required. · Respond to emergency calls in the evenings and on weekends regarding WAN / LAN outages. Certification Requirements: Minimum: · Cisco Certified Network Professional (CCNP). Strongly Preferred: · EVPL provisioning and troubleshooting. · Cisco ASA, router and switch product line, including Nexus · A baccalaureate degree from an accredited college, and eight years of satisfactory full-time (not classroom based) experience in VoIP architecture and design, wide area network planning, design, configuration, installation, troubleshooting, integration, performance monitoring, maintenance, enhancement, and security management; or · A master’s degree in computer science or a related field from an accredited college may substitute for one year of experience. However, all candidates must have at least eight years of satisfactory (not classroom based) full-time information technology experience as described in “1” above. Experience and Skillsets · Expertise and significant hands-on experience working with large LAN/WAN infrastructure and all LAN and WAN networking technologies Knowledge of communication protocols and Cisco communication equipment. · Hands-on experience and expertise with Cisco Nexus family of switches, Cisco Catalyst Switches 6xxx, 5xxx, 4xxx, 29xx, 19xx, RSM; Cisco Routers 7500, 7200, 4000, 3600, 2600, 2500, 800; Cisco VPN 3000. Networking protocols and standards: · Ethernet, Frame Relay, T1, T3, ISDN; Routing protocols (RIPv2, EIGRP, OSPF, BGP); and Firewall technology (PIX), · Virtual Private Networks, Voice over IP, Class of service and quality of service and traffic flow classification. · Excellent analytical and organizational skills
Direct Client Requirement :: Network Engineer :: Brooklyn, NY
Hello, Please go through the below requirement and let me know on recrui...@tcagroupmail.com if you have comfortable Resources or not. Role: Network Engineer Duration: About 24 months Location: Brooklyn, NY Only Local Candidates with GC/EAD-GC/USC Job Description: Under the oversight of the Director of Service Delivery and Network Operations, with broad scope for the exercise of independent initiative and judgment, the Router/Switch Field Engineer is responsible for evaluating, implementing, testing, and documenting of all projects, as well as performing problem isolation and resolution, optimization, and propagation of standards for maintaining a complex range of computer network components and systems. He or she as a team member of Service Delivery and Network Support will provide remote site support for administrative and instructional arms of the DOE network. He/she will interface with various support groups, both internal external to Division of Instructional & Information Technology (DIIT), DoE partners, and vendors to oversee that compliance and direction are maintained within the DoE enterprise network. Reports to: Manager of Network Support Key Relationships: Interfaces with WAN support, LAN support, Network Integrators, DOE network engineers, Project Connect network engineers and other support teams to oversee that compliance and directions are maintained with the placement of network hardware and all associated platforms and components connecting to all network hardware. Responsibilities: · Primarily provide remote site support for the integration of network equipment via circuit provisioning and testing. Duties will also include the following: · Design and implementation of complex network projects to address and resolve business needs of DOE. · Perform network modification projects in relation to DoE Wide Area Network (WAN), DoE enterprise data centers that include routing protocol configuration changes, router/switch configuration, and firewall/VPN configuration. · Meet with and collect data from various departments and agencies in the creation of practical network modifications for design, development, testing and eventual implementation in the production environment. · Create change requests for configuration changes on routers, switches and firewalls etc. · Performs day-to-day network administration tasks including network equipment maintenance, application and network troubleshooting utilizing packet traces. · Utilizes monitoring, performance analysis, network management, software and hardware equipment to troubleshoot and isolate problems, gauge network performance, and trace data and protocol activity. · Provides periodic network inventory reports, bandwidth utilization and security status reporting. · Prepare network diagrams, floor plans and schematics using Microsoft Visio. · Supports and maintains DoE optical backbone comprising DWDM and Synchronous Optical Networking (SONET) environment. · Responds evenings and weekends to emergency calls regarding critical network outages. Certification Requirements: Experience and Skillsets: · Deep understanding in networking technologies related to all layers of the TCP/IP stack. · Strong experience in routing and switching protocols such as BGP, EIGRP, OSPF, RIP, STP, Etherchannel and Trunking. · Expertise and significant hands-on experience working with large LAN/WAN infrastructure and all LAN and WAN networking technologies. · Hands-on experience and expertise with Cisco Catalyst Switches 6500, 4500, 3550; Cisco Routers 7500, 7200, 3845, 2900, 800. · Excellent understanding of VPN and related protocols - site to site, client, IPSEC (including the protocol suite), IKE, tunnel modes, SSL clientless/ Anyconnect, Tunnels between ASAs, Routers. · Experience with Local Load Balancers Cisco CSS/ACE/GSS, F5 BigIP LTM. · Experience in technical documentation including network drawings using Microsoft Visio. · Excellent analytical and organizational skills and attention to detail. · Excellent verbal and written communication skills in preparation of reports, presentations and documentation. · Ability to verbally translate and articulate complex technical issues for the efficacy of non-technical users. · Experience in the development of technology standards for Architecture, Design and Implementation. Networking protocols and standards: · CCNP certification 1. A
Direct Client Requirement :: Network engineer :: Brooklyn, NY 11201
Hello, Please go through the below requirement and let me know on recrui...@tcagroupmail.com if you have comfortable Resources or not. Role: network engineer Location: Brooklyn, NY 11201 Duration: Above 6 months Only Candidates with GC/EAD-GC/USC SCOPE OF SERVICES: The Network Specialist will be responsible for leading and executing network installations and deployment deliverables for the MOCJ Migration Project. This will include conducting deep dive assessments and documentation of technical requirements, architecture designs, configuration request forms, and operational run books. The Network Specialist will work closely with service owner teams and Agency stakeholders to ensure efficient provisioning of service offerings (Server, Storage, Network, Database, and Service Desk) to align with Agency hosting requirements. The network specialist will have an extensive technical background covering all aspects of data center migration and hosting. MANDATORY SKILLS/EXPERIENCE: · Minimum 4 years of experience in the areas of installation, maintenance, configuration and troubleshooting telecommunications equipment/failures, including, but not limited to DSU/CSUs, network sniffers, switches, and associated cabling and power elements, in data center environments; · Ability to test and certify data circuits, such as analog, digital, inside wiring (Cat-6, Cat-6A & Fiber) (Sub-rate DS0, DS0, DS1, DS3, OC3, BRI, PRI and SONET); · Ability to work with various Telco & ISP Broadband carriers, NOC, and/or test centers to perform routine testing of data circuits and ISP services; · Ability to coordinate support from Internet Service Providers to diagnose and correct circuit issues; · Strong background in IP networking concepts and their application to Microsoft based networking configuration ability to install, maintain, configure and troubleshoot telecommunications lines, circuit equipment, including but not limited to DSU/CSUs, switches, routers, multiplexers (including SONET) and associated cabling and power elements, in both data center and remote (user) site environments; · Possess the ability to install, configure and test Switching in a WAN/LAN environment Infrastructure Copper/Fiber support, including LAN hardware (router, switch), cabling (CAT6), network interface cards and topologies (Gigabit Ethernet and Fast Ethernet); · Must have working knowledge of voice over IP to support implementation with various switches (EG: Cisco, Avaya). DESIREABLE SKILLS/EXPERIENCE • Review and evaluate agency network architecture to create an assessment as required. • Provide migration strategies and direction to migrate or consolidate network infrastructure. • Provide expert technical guidance for complex and difficult switching/routing/optical network architectures in order to facilitate and expedite migrations. • Interface with other DoITT teams to ensure that network changes flow efficiently • Design and code router/switch configurations as required Thanks, Shalin TCA Consulting Group Inc. recrui...@tcagroupmail.com Mobile: 704-954-8008 -- You received this message because you are subscribed to the Google Groups "Open Source Erp & Crm" group. To unsubscribe from this group and stop receiving emails from it, send an email to open-source-erp-crm+unsubscr...@googlegroups.com. To post to this group, send email to open-source-erp-crm@googlegroups.com. Visit this group at https://groups.google.com/group/open-source-erp-crm. For more options, visit https://groups.google.com/d/optout.