[Opencompute-networking] OCP Networking Testing Consortium

Howdy, Over the last 9 months or so, we as a community, have been working hard on increasing testing at all levels: * Component Validation - ONIE Compliance, SAI Compliance, APD Compliance, et al * Interop Testing - Ensuring OCP and non-OCP Gear works together * Industry Compliance - Ensuring

[Opencompute-networking] Next Project Call

Howdy, It's that time again. Here's the agenda for our upcoming call on Monday: * SAI development environment for soft-switch model ( 5 min ) * Mellanox submissions - 2 switches ( 20 min ) * Inventec submissions - 2 switches ( 20 min ) Meeting Minutes:

[Opencompute-networking] Hardware Submission Explosion

Howdy, We know it's too early to send out the agenda for our next project call: June 8 but we wanted to share some news. In the last few days, we received 4 new switch contributions: Mellanox * MSX1410OCP - 48x10GB SFP+, 12x40GB QSFP+, OCPHL - Reciprocal * MSX1710OCP - 36x40GB QSFP+, OCPHL -

[Opencompute-networking] Open Networking Consortium Testing - Membership Proposal Doc

Howdy, As a follow up to today's call on the Open Network Consortium Testing section, the meeting minutes have been updated to reflect the link to the Membership Proposal document (link here as well: http://files.opencompute.org/oc/public.php?service=filest=10b85b2c499f52fe77c3d75e89115759 ).

[Opencompute-networking] Upcoming project call

Howdy, It's that time again. Here's the agenda for our upcoming call on Monday * Common Module Interface - 15 min (Craig Thompson, Finisar) * 100GB Cavium Switch - 15 min (Jeff Catlin, Accton) * 2016 OCP Summit Agenda - 15 min Meeting minutes:

Re: [Opencompute-networking] Oct 9 OCP Eng Workshop in Boston

> > Cheers > Rajat > > > On Sep 14, 2015 10:02 PM, "Carlos Cardenas" <car...@cumulusnetworks.com> > wrote: > >> Howdy, >> >> Registration is now open for the Oct 9 OCP Eng Workshop in Boston hosted >> by Fidelity. >> >> Visit &

Re: [Opencompute-networking] opencompute-networking Digest, Vol 30, Issue 8

Hey Robert, You're correct. The document is/was blank (adding the agenda now) and this is where we will keep a record for tomorrow's meeting. +--+ Carlos On Tue, Nov 17, 2015 at 11:01 AM, wrote: > LJ, > > Thanks. This is the blank Meeting Minutes. However,

[Opencompute-networking] Upcoming project call for Monday

Howdy, It's that time again. Here's the agenda for our upcoming call on Monday * Oct 9 Engineering Workshop Agenda selection Meeting minutes: https://docs.google.com/a/ocproject.net/document/d/1yab0h1LMZZVI0tX7vwKly-HsHxw95a9fM51G7ZjfIMQ Quick call info: - September 14, 10 - 11 US Pacific -

Re: [Opencompute-networking] OCP : TOR

Hi Manoj, Typically the RJ45 connections are: * 1x Serial Console * 1x Out of Band Management The SFP+ cages (on the 10G switches) are for in-band traffic. To better answer your questions for #2 and #3, can you indicate which OCP TOR you are referring to? Thanks. +--+ Carlos On Tue, Dec 15,

[Opencompute-networking] Upcoming project call on Monday

Its that time again. Here's the agenda for our upcoming call on Monday * Common Module Interface / Open Optical Monitoring - 15min - Don Bollinger (Finisar) * SnapRoute L2/L3 - 20min - Jason Forrester (SnapRoute) Meeting minutes:

[Opencompute-networking] OCP Engineering Workshop: 2016 August 10 at UNH

Howdy, The foundation has posted the next OCP Engineering Workshop (Sponsored by UNH and Fidelity) to be held at 2016 August 10 at University of New Hampshire. This event will be held in conjunction with the next OCP L1 Interoperability Plugfest Event at UNH-IOL (next building over on campus)

[Opencompute-networking] Agema and Nephos Hardware Review - 2016 April 4 at 1600 PDT

Howdy, We have scheduled Agema's and Nephos's community hardware review for 2016 April 4 at 1600 PDT. The time was chosen to be friendly to those in the APAC region that wanted to attend. Hardware review: * Agema POE switch * Nephos 10Gb switch (based on AS5712) -- first switch submission based

[Opencompute-networking] Upcoming project call on Monday

Howdy, Its that time again. Here's the agenda for our upcoming call on Monday * Brief review of previous hardware reviews (Edgcore, Agema, and Nephos) - 5 min * Wireless Initiative (Rajat Ghai, Benu Networks) - 10 min * Review Wedge 100 and 6pack40, if schedule allows Meeting minutes:

Re: [Opencompute-networking] Work Item proposal for OCP Wi-Fi AP

Hey Rajat, I don't think you're jumping the gun (carpe diem and such). As one the few members that have expertise in this field, would y'all mind assist in steering this 'sub-group'? Is there any interest from others willing to participate in the wireless subgroup? +--+ Carlos On Mon, Mar 21,

[Opencompute-networking] Record # of hardware submissions

Howdy, Well, I hope everyone has fully recovered from the OCP Summit a couple weeks ago, because we got some serious work ahead. In the weeks preceding/during/after summit, we received 12 new hardware submissions representing 16 different SKUs across: data center, edge routing, access/campus!!!

[Opencompute-networking] Next Project Call

Howdy, Just a reminder, the next project call is April 11. We are skipping the March 14 date as we are having the OCP Summit/Eng. Workshop just a few days before then. Hope to see y'all at the Summit next week. +--+ Carlos ___ opencompute-networking

Re: [Opencompute-networking] Work Item proposal for OCP Wi-Fi AP

not exclude that. Perhaps one of them will have a chance to comment since I missed a few of the meetings/discussion at the Summit.   Dev   From: Rajat Ghai [mailto:rajatg...@gmail.com] Sent: Tuesday, March 22, 2016 9:59 AM To: Paul, Devashish Cc: Jeff Catlin; Ayham Ereksousi; Carlos Cardenas; Craig White

Re: [Opencompute-networking] OCP Networking Project Lead Election

Howdy, I want to give everyone an update. Looks like the voting keys were distributed not too long ago. If you haven't received your voting key and believe that you should, please email electi...@opencompute.org . Happy Voting. +--+ Carlos On Tue, Jul 12, 2016 at 1:07 PM, Carlos Cardenas

Re: [Opencompute-networking] OCP Engineering Workshop: 2016 August 10 at UNH

Howdy HoYong,If you are going to be present in New Hampshire, I think we can allocate some time. Is 15 min enough? +--+Carlos

[Opencompute-networking] Live streaming (and recording) of afternoon networking session

http://www.youtube.com/watch?v=Nq0E_rhLO0w +--+ Carlos ___ opencompute-networking mailing list Unsubscribe: http://lists.opencompute.org/mailman/options/opencompute-networking opencompute-networking@lists.opencompute.org

[Opencompute-networking] OCP Networking Project Lead Election

Howdy, Today's the start of voting for the next set of co-chairs for Networking. In the next few hours, y'all will be receiving voting keys that allows y'all to cast a vote in this election. Each voting key is tied to your email address and once the key has been used to cast a vote, it is no

[Opencompute-networking] Upcoming project call on Monday

Howdy, Its that time again. Here's the agenda for our upcoming call on Monday * Finalize UNH workshop agenda - make sure to register (link in meeting minutes) Meeting minutes: https://docs.google.com/a/ocproject.net/document/d/13MtHUxfRv6EcM_IGJTNVXdBpfT_wCicGYK8NHYfb7Ls Quick call info: -

[Opencompute-networking] CWDM4-lite questions

Howdy Katharine. Thanks for presenting this a couple of weeks ago. Here's the following feedback I have: * From this spec on CWDM4-lite ( http://files.opencompute.org/oc/public.php?service=files=8ee8934b1f1f57bec2f88f2fac804d03), I've spent more time reading the CWDM4 spec (

Re: [Opencompute-networking] OCP Networking Call Today

Thanks Scott +--+ Carlos On Mon, Feb 13, 2017 at 9:25 AM, Scott Emery wrote: > Folks, > > Looks like the announcement for today's meeting didn't go out. The meeting > is on at 10:00am Pacific time (about 30 minutes from now). It's a packed > agenda. The agenda and

[Opencompute-networking] Upcoming project call and hardware review on Monday

Howdy, Its that time again. Here's the agenda for our upcoming project call on Monday * SONiC community review - Xin Liu, MSFT - 20 min * Finalize Dallas Workshop agenda * SKT T-CAP community review - Sohn Min Ho, SKT (see below) Meeting minutes:

[Opencompute-networking] Upcoming project call on Monday

Howdy, Its that time again. Here's the agenda for our upcoming project call on Monday * Start planning for Networking Tech Day, around Summit ** will require a planning meeting to be held soon, look at early November in the Bay Area * Lot of reviews for the next IC meeting (13 and counting)

[Opencompute-networking] Oct 31 Planning Meeting Info

Howdy, We will be meeting at Agema's offices (thanks again for Agema hosting) located at: 46101 Fremont Blvd, Fremont, CA 94538 For those that will be joining remotely, we'll be using our standard call info that we use for project calls: Fuze meeting URL: http://fuze.me/24798495- Phone/dial-in:

Re: [Opencompute-networking] Reminder that CBW subgroup monthly call will happen on .

Rajat, You'll need to send that info to Amber and/or Michael to get it on the calendar. The wiki I can take care of later today. +--+ Carlos On Wed, Nov 9, 2016 at 1:50 PM, Rajat Ghai wrote: > Carlos, > > Can you please put the time/date on CBW meeting, on OCP Networking

Re: [Opencompute-networking] CBW AP minimum hardware/OS specs

David, I think what you are describing are some good points on the resource constraints on the WAPs. However, saying that using ONIE increases your disk storage by 1.5GB is over the top. For example, take a look at the Edgecore 4600, it's an old PPC/BCM Apollo2 1G switch with 1GB of Flash and

Re: [Opencompute-networking] Looking for official Wedge 100 OpenNSL

I would suggest y'all contact Broadcom directly to add Wedg100 to their OpenNSL repos. That is how their model works (unless you have their SDK). +--+ Carlos On Wed, Oct 19, 2016 at 9:36 AM, Luke Williams wrote: > You back ported the Wedge 100 to this branch: > >

[Opencompute-networking] Oct 31 Planning Meeting Registration and Agenda

Howdy, We're happy to announce that we got a venue for the Oct 31 meeting. Thank you Agema. For those that will be in town, we have a form to keep track of the headcount (to make sure we'll have plenty of food and beverages). https://goo.gl/forms/Dj4vXtiL4Mc3YKt73 For those that would like to

Re: [Opencompute-networking] Eco-system Interoperability and IP Protection

Hi David, Here's the IPR doc: http://opencompute.org/assets/download/01-legal-documents-as-of-october-2016/Open-Compute-IP-Policy-Final-7-23-15.pdf The CLA is located here:

[Opencompute-networking] Minutes from Oct 31 Planning Meeting

Howdy. I want to provide the minutes from yesterday's planning meeting. First I would like to thank Agema(Delta) for being a great host. We talked about how last year we did an OCP Networking video encompassing what all we as a community have done (in case y'all haven't seen it:

[Opencompute-networking] Oct 31 Planning Meeting for Networking Tech Day 2017

Howdy. As discussed during our project call on Monday, we'll be having a planning meeting on October 31 (late afternoon/early evening) to go over ideas on what we want to demonstrate during a networking tech day around summit. Working with some vendors in the Bay Area, I haven't been able to

Re: [Opencompute-networking] Doodle poll for CBW meetings

Correct. +--+ Carlos On Mon, Oct 17, 2016 at 9:47 AM, Kevin Currie wrote: > To confirm, Meeting ID: 247-98-495, Toll Number: +1 201-479-4595 > <+1%20201-479-4595>, Toll Free Number: +1 855-346-3893 <+1%20855-346-3893> > ?? > > >

Re: [Opencompute-networking] Doodle poll for CBW meetings

Take a look at https://www.fuze.com/numbers for all international numbers. France is: Local toll 01 57 32 95 55 Intl toll +33 1 57 32 95 55 Local toll free 0 805 54 26 06 +--+ Carlos On Mon, Oct 17, 2016 at 10:04 AM, wrote: > Hello > > What is the international

[Opencompute-networking] The Networking Rodeo

Howdy. In this rodeo, no one rides the bull longer than 8 seconds. It's my time for me to get off the bull and hang my hat. Translation: I'm stepping down from my role as co-chair effective immediately. Over the last 2.5 years, we've been through hell and half of Texas and together, we have