from:"Rajath C S"

Re: [OE-core] [oe] [meta-ros] ros build error on poky

2018-04-06 Thread Rajath C S

i understand that this isnt specific to ros queries but i do have posted
the same at the ROS mailing-list and to ROS maintainers and the issue is to
be yet resolved perfectly.

Thanks

Rajath C S,
9964182112,
Bangalore - 560060

On Fri, Apr 6, 2018 at 12:34 PM, Rajath C S <rajathcs.1...@gmail.com> wrote:

> 1. i'd like to know does the process being followed in this link lead us
> to installation of ROS-kinetic / indigo or others, hope i am clear..? that
> is want to know if the process of including and compiling meta-ros layer
> for yocto equal to install ros on ubuntu i mean in literal sense
>
> http://wiki.ros.org/hydro/Installation/OpenEmbedded
>
> 2. Is the wxwidgets_2.9.5.bb recipe important because i am getting the
> below error when 'bitbake roslaunch' is used
>
> ERROR: ExpansionError during parsing /home/jarvis/poky/meta-ros/
> recipes-extended/wxwidgets/wxwidgets_2.9.5.bb  |
> ETA:  0:02:07
> Traceback (most recent call last):
> bb.data_smart.ExpansionError: Failure expanding variable CXXFLAGS[:=],
> expression was ${@oe_filter_out('-fvisibility-inlines-hidden', ' -O2
> -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/
> jarvis/poky/openembedded-core/build/tmp-glibc/work/i586-oe-
> linux/wxwidgets/2.9.5-r0=/usr/src/debug/wxwidgets/2.9.5-r0
> -fdebug-prefix-map=/home/jarvis/poky/openembedded-core/
> build/tmp-glibc/work/i586-oe-linux/wxwidgets/2.9.5-r0/recipe-sysroot-native=
> -fdebug-prefix-map=/home/jarvis/poky/openembedded-core/
> build/tmp-glibc/work/i586-oe-linux/wxwidgets/2.9.5-r0/recipe-sysroot=
> -fvisibility-inlines-hidden', d)} which triggered exception NameError: name
> 'oe_filter_out' is not defined
>
>
> Thanks
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [oe] [meta-ros] ros build error on poky

2018-04-06 Thread Rajath C S

1. i'd like to know does the process being followed in this link lead us to
installation of ROS-kinetic / indigo or others, hope i am clear..? that is
want to know if the process of including and compiling meta-ros layer for
yocto equal to install ros on ubuntu i mean in literal sense

http://wiki.ros.org/hydro/Installation/OpenEmbedded

2. Is the wxwidgets_2.9.5.bb recipe important because i am getting the
below error when 'bitbake roslaunch' is used

ERROR: ExpansionError during parsing
/home/jarvis/poky/meta-ros/recipes-extended/wxwidgets/wxwidgets_2.9.5.bb
| ETA:  0:02:07
Traceback (most recent call last):
bb.data_smart.ExpansionError: Failure expanding variable CXXFLAGS[:=],
expression was ${@oe_filter_out('-fvisibility-inlines-hidden', ' -O2 -pipe
-g -feliminate-unused-debug-types
-fdebug-prefix-map=/home/jarvis/poky/openembedded-core/build/tmp-glibc/work/i586-oe-linux/wxwidgets/2.9.5-r0=/usr/src/debug/wxwidgets/2.9.5-r0
-fdebug-prefix-map=/home/jarvis/poky/openembedded-core/build/tmp-glibc/work/i586-oe-linux/wxwidgets/2.9.5-r0/recipe-sysroot-native=
-fdebug-prefix-map=/home/jarvis/poky/openembedded-core/build/tmp-glibc/work/i586-oe-linux/wxwidgets/2.9.5-r0/recipe-sysroot=
-fvisibility-inlines-hidden', d)} which triggered exception NameError: name
'oe_filter_out' is not defined


Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-oe] qemu boot problem

2018-04-05 Thread Rajath C S

Do have a look at main thread of this topic to know the Machine config and
error message

On Thu, 5 Apr 2018, 18:50 Rajath C S, <rajathcs.1...@gmail.com> wrote:

> The above text I have posted itself is the full output it's throwing and
> with with respect to command - runqemu qemux86
>
>
> On Thu, 5 Apr 2018, 18:38 Alexander Kanavin, <
> alexander.kana...@linux.intel.com> wrote:
>
>> On 04/05/2018 01:43 PM, Rajath C S wrote:
>> > as the error specifies about a specific recipe missing the license, i'd
>> > like to know which recipe is that what is the pointer to defaultpkgname
>>
>> You need to provide both the command you issue on the command line, and
>> the full output that it prints.
>>
>> Alex
>>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-oe] qemu boot problem

2018-04-05 Thread Rajath C S

The above text I have posted itself is the full output it's throwing and
with with respect to command - runqemu qemux86


On Thu, 5 Apr 2018, 18:38 Alexander Kanavin, <
alexander.kana...@linux.intel.com> wrote:

> On 04/05/2018 01:43 PM, Rajath C S wrote:
> > as the error specifies about a specific recipe missing the license, i'd
> > like to know which recipe is that what is the pointer to defaultpkgname
>
> You need to provide both the command you issue on the command line, and
> the full output that it prints.
>
> Alex
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-oe] qemu boot problem

2018-04-05 Thread Rajath C S

as the error specifies about a specific recipe missing the license, i'd
like to know which recipe is that what is the pointer to defaultpkgname

Thanks

Rajath C S,
9964182112,
Bangalore - 560060

On Thu, Apr 5, 2018 at 3:30 PM, Rajath C S <rajathcs.1...@gmail.com> wrote:

> Hi,
>
> so i completed the core-image-sato build but while running it on qemu i
> get the below error.
>
> runqemu - INFO - Running MACHINE=qemux86 bitbake -e...
> ERROR: This recipe does not have the LICENSE field set (defaultpkgname)
> runqemu - ERROR - bitbake -e
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
> Build Configuration:
> BB_VERSION   = "1.37.0"
> BUILD_SYS= "x86_64-linux"
> NATIVELSBSTRING  = "universal"
> TARGET_SYS   = "i586-poky-linux"
> MACHINE  = "qemux86"
> DISTRO   = "poky"
> DISTRO_VERSION   = "2.4+snapshot-20180405"
> TUNE_FEATURES= "m32 i586"
> TARGET_FPU   = ""
> meta
> meta-poky
> meta-yocto-bsp   = "master:80c7ca2c28959d08a59d960d318d8360392bd488"
> meta-oe
> meta-python  = "master:b9d1d8718834f7287e5a65373b952cbfe9ce83fe"
>
>
>
>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [meta-oe] qemu boot problem

2018-04-05 Thread Rajath C S

Hi,

so i completed the core-image-sato build but while running it on qemu i get
the below error.

runqemu - INFO - Running MACHINE=qemux86 bitbake -e...
ERROR: This recipe does not have the LICENSE field set (defaultpkgname)
runqemu - ERROR - bitbake -e
Summary: There was 1 ERROR message shown, returning a non-zero exit code.


Build Configuration:
BB_VERSION   = "1.37.0"
BUILD_SYS= "x86_64-linux"
NATIVELSBSTRING  = "universal"
TARGET_SYS   = "i586-poky-linux"
MACHINE  = "qemux86"
DISTRO   = "poky"
DISTRO_VERSION   = "2.4+snapshot-20180405"
TUNE_FEATURES= "m32 i586"
TARGET_FPU   = ""
meta
meta-poky
meta-yocto-bsp   = "master:80c7ca2c28959d08a59d960d318d8360392bd488"
meta-oe
meta-python  = "master:b9d1d8718834f7287e5a65373b952cbfe9ce83fe"
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [meta-debian] build error

2018-03-28 Thread Rajath C S

 0 down vote favorite


I followed the instruction provided by meta-debian github page:
https://github.com/meta-debian/meta-debian

During the build process I faced errors while bitbake was do-compiling some
of the recipes.. they are *e2fsprogs, busybox, gettext* etc..

I searched the respective layers i.e, *meta* and *meta-debian* and found
out that this recipes were present in both the layers.

I removed *e2fsprogs* from *meta* layer and *busybox, gettext* from
*meta-debian* and bitbaked again, this removed the errors which was showing
previously during bitbake. I did this because same recipes was present in
the both the layers.

now the build is completed up to 90% but I'm stuck at *gcc-runtime-4.9.2-r0*
do_compile error.

I tried hard but I'm not able to solve this error.

The entire terminal output is as shown below.

*ERROR: gcc-runtime-4.9.2-r0 do_compile: oe_runmake failed*

*ERROR: gcc-runtime-4.9.2-r0 do_compile: Function failed: do_compile (log
file is located at
/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/temp/log.do_compile.18839)*

*ERROR: Logfile of failure stored in:
/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/temp/log.do_compile.18839*

Log data follows: | DEBUG: SITE files ['endian-little', 'bit-32',
'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common'] |
DEBUG: Executing shell function do_compile | NOTE: make -j 4
ARCH_FLAGS_FOR_TARGET= -m32 -march=i586
-isystem/media/pavan/WD03/build/tmp/sysroots/qemux86/usr/include
MULTIBUILDTOP=/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/gcc-4.9.2/build.i586-deby-linux.i586-deby-linux/i586-deby-linux/libgcc/
| # If this is the top-level multilib, build all the other | DEFINES=''
HEADERS='/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/config/i386/value-unwind.h'
\ |
/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/mkheader.sh
> tmp-libgcc_tm.h | # multilibs. | /bin/bash
/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/../move-if-change
tmp-libgcc_tm.h libgcc_tm.h | i586-deby-linux-gcc -m32 -march=i586
--sysroot=/media/pavan/WD03/build/tmp/sysroots/qemux86 -O2 -pipe -g
-feliminate-unused-debug-types
-fdebug-prefix-map=/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0=/usr/src/debug/gcc-runtime/4.9.2-r0
-fdebug-prefix-map=/media/pavan/WD03/build/tmp/sysroots/x86_64-linux=
-fdebug-prefix-map=/media/pavan/WD03/build/tmp/sysroots/qemux86= -O2 -g -Os
-DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowing
-Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes
-Wold-style-definition -isystem ./include -fpic -mlong-double-80 -g
-DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -fpic -mlong-double-80
-I. -I.
-I/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/gcc-4.9.2/build.i586-deby-linux.i586-deby-linux/i586-deby-linux/libgcc/../.././gcc
-I/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc
-I/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/.
-I/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/../gcc
-I/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/../include
-I/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/config/libbid
-DENABLE_DECIMAL_BID_FORMAT -DHAVE_CC_TLS -DUSE_TLS -o morestack_s.o -MT
morestack_s.o -MD -MP -MF morestack_s.dep -DSHARED -c -xassembler-with-cpp
/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/config/i386/morestack.S
| sed -e 's/*PFX*/*/g' \ | -e 's/__FIXPTPFX*/__/g' <
/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libgcc/
libgcc-std.ver.in > libgcc-std.ver PIC -DPIC -fno-implicit-templates -Wall
-Wextra -Wwrite-strings -Wcast-qual -Wabi -fdiagnostics-show-location=once
-ffunction-sections -fdata-sections -frandom-seed=compatibility-condvar.lo
-O2 -pipe -g -feliminate-unused-debug-types
-fdebug-prefix-map=/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0=/usr/src/debug/gcc-runtime/4.9.2-r0
-fdebug-prefix-map=/media/pavan/WD03/build/tmp/sysroots/x86_64-linux=
-fdebug-prefix-map=/media/pavan/WD03/build/tmp/sysroots/qemux86=
-std=gnu++11 -c
/media/pavan/WD03/build/tmp/work/i586-deby-linux/gcc-runtime/4.9.2-r0/git/src/libstdc++-v3/src/c++11/compatibility-condvar.cc
-o compatibility-condvar.o >/dev/null 2>&1 | /bin/bash ../libtool --tag CXX
--mode=link i586-deby-linux-g++ -m32 -march=i586
--sysroot=/media/pavan/WD03/build/tmp/sysroots/qemux86 -nostdinc++
-nostdlib++ -Wl,-O1 -Wl,-z,relro -Wl,--gc-sections -fPIC -DPIC
-fno-implicit-templates -Wall -Wextra -Wwrite-strings -Wcast-qual -Wabi
-fdiagnostics-show-location=once

[OE-core] [oe-core] network error

2018-03-27 Thread Rajath C S

Hi,

I am trying to do a pip install on poky for one of the python package and
it is resulting in this error, do help


Retrying (Retry(total=4, connect=None, read=None, redirect=None)) after
connection broken by
'NewConnectionError'('': Failed to establish a new connection: [Errno -2]
Name or service not known',): /simple/pyros-setup/
Could not find a version that satisfies the requirement pyros_setup (from
versions: ) No matching distribution found for pyros_setup

Thanks,
Rajath
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-debian] build error

2018-03-25 Thread Rajath C S

Thanks for the tip! I'll check out the respective links.

On Mon, 26 Mar 2018, 02:48 Andreas Müller, <schnitzelt...@gmail.com> wrote:

> On Sun, Mar 25, 2018 at 9:58 PM, Rajath C S <rajathcs.1...@gmail.com>
> wrote:
> > Error while building opencv
> >
> > ERROR:
> >
> opencv-3.3+gitAUTOINC+87c27a074d_2a9d1b22ed_a62e20676a_34e4206aef_fccf7cd6a4-r0
> > do_compile: Function failed: do_compile (log file is located at
> >
> /home/jarvis/poky/build/tmp/work/i586-poky-linux/opencv/3.3+gitAUTOINC+87c27a074d_2a9d1b22ed_a62e20676a_34e4206aef_fccf7cd6a4-r0/temp/log.do_compile.7688)
> > ERROR: Logfile of failure stored in:
> >
> /home/jarvis/poky/build/tmp/work/i586-poky-linux/opencv/3.3+gitAUTOINC+87c27a074d_2a9d1b22ed_a62e20676a_34e4206aef_fccf7cd6a4-r0/temp/log.do_compile.7688
> >
> > may i know what this error is precisely referring to  i dint have this
> error
> > when i was trying to build opencv yesterday
> >
> > Thanks
> >
> My opinion: meta-debian is by far the worst layer I've ever seen. It
> overwrites many (and tries to move from many to all) recipes with own
> ones [1].
>
> My suggestion: Remove meta-debian from bblayers.conf and try again.
>
> * If you are fine - open an issue at meta-debian/github (error was
> caused by meta-debian)
> * If build failure persists, it would help to attach the log files the
> error message referrers to.
>
> [1]
> https://layers.openembedded.org/layerindex/branch/master/layer/meta-debian/
>
> Andreas
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-ros] ros package import problem

2018-03-25 Thread Rajath C S

Thanks, I'll check it out.

On Mon, 26 Mar 2018, 04:02 Philip Balister, <phi...@balister.org> wrote:

> On 03/25/2018 04:38 PM, Rajath C S wrote:
> > Can i get a reply from the respective maintainers?
>
> You will have better luck reading:
>
> https://github.com/bmwcarit/meta-ros
>
> and understanding where to post your question. This list is not a
> support list for meta-ros.
>
> Philip
>
> >
> > Rajath C S,
> > 9964182112,
> > Bangalore - 560060
> >
> > On Fri, Mar 23, 2018 at 12:06 PM, Rajath C S <rajathcs.1...@gmail.com>
> > wrote:
> >
> >> i have added rospy and roslib to CORE_IMAGE_EXTRA_INSTALL += in
> local.conf
> >> but when i go to the python terminal in poky and import rospy and
> roslib it
> >> is unable to do so
> >>
> >> any solution would be of great help thanks
> >>
> >> Rajath C S
> >>
> >>
> >
> >
> >
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-ros] ros package import problem

2018-03-25 Thread Rajath C S

Can i get a reply from the respective maintainers?

Rajath C S,
9964182112,
Bangalore - 560060

On Fri, Mar 23, 2018 at 12:06 PM, Rajath C S <rajathcs.1...@gmail.com>
wrote:

> i have added rospy and roslib to CORE_IMAGE_EXTRA_INSTALL += in local.conf
> but when i go to the python terminal in poky and import rospy and roslib it
> is unable to do so
>
> any solution would be of great help thanks
>
> Rajath C S
>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [oe-core] package import error

2018-03-25 Thread Rajath C S

why is my cv2 import (of opencv) saying illegal instruction (last line of
pic)
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-debian] build error

2018-03-25 Thread Rajath C S

Error while building opencv

ERROR:
opencv-3.3+gitAUTOINC+87c27a074d_2a9d1b22ed_a62e20676a_34e4206aef_fccf7cd6a4-r0
do_compile: Function failed: do_compile (log file is located at
/home/jarvis/poky/build/tmp/work/i586-poky-linux/opencv/3.3+gitAUTOINC+87c27a074d_2a9d1b22ed_a62e20676a_34e4206aef_fccf7cd6a4-r0/temp/log.do_compile.7688)
ERROR: Logfile of failure stored in:
/home/jarvis/poky/build/tmp/work/i586-poky-linux/opencv/3.3+gitAUTOINC+87c27a074d_2a9d1b22ed_a62e20676a_34e4206aef_fccf7cd6a4-r0/temp/log.do_compile.7688

may i know what this error is precisely referring to  i dint have this
error when i was trying to build opencv yesterday

Thanks



Rajath C S,
9964182112,
Bangalore - 560060

On Mon, Mar 26, 2018 at 1:22 AM, Rajath C S <rajathcs.1...@gmail.com> wrote:

> Ok, thanks for the clarification.
>
> On Mon, 26 Mar 2018, 01:21 Burton, Ross, <ross.bur...@intel.com> wrote:
>
>> Speaking as an oe-core maintainer, we don't support meta-debian: use
>> it at your own risk.
>>
>> Ross
>>
>> On 25 March 2018 at 20:49, Rajath C S <rajathcs.1...@gmail.com> wrote:
>> > Hi,
>> >
>> > I am encountering the below error while building meta-debian (which is
>> added
>> > in bblayer.conf)
>> >
>> > ERROR: /home/jarvis/poky/meta-debian/recipes-misc/ltp/ltp_git.bb: Error
>> > executing a python function in :
>> >
>> > The stack trace of python calls that resulted in this exception/failure
>> was:
>> > File: '', lineno: 3, function: 
>> >  0001:__anon_25__home_jarvis_poky_meta_classes_patch_bbclass(d)
>> >  0002:__anon_160__home_jarvis_poky_meta_classes_base_bbclass(d)
>> >  *** 0003:__anon_686__home_jarvis_poky_meta_classes_base_bbclass(d)
>> >  0004:__anon_1305__home_jarvis_poky_meta_classes_insane_bbclass(d)
>> >  0005:__anon_250__home_jarvis_poky_meta_classes_package_bbclass(d)
>> >  0006:__anon_352__home_jarvis_poky_meta_classes_package_deb_
>> bbclass(d)
>> >  0007:__anon_25__home_jarvis_poky_meta_classes_debian_bbclass(d)
>> > File: '/home/jarvis/poky/meta/classes/base.bbclass', lineno: 587,
>> function:
>> > __anon_686__home_jarvis_poky_meta_classes_base_bbclass
>> >  0583:needsrcrev = False
>> >  0584:srcuri = d.getVar('SRC_URI')
>> >  0585:for uri in srcuri.split():
>> >  0586:(scheme, _ , path) = bb.fetch.decodeurl(uri)[:3]
>> >  *** 0587:
>> >  0588:# HTTP/FTP use the wget fetcher
>> >  0589:if scheme in ("http", "https", "ftp"):
>> >  0590:d.appendVarFlag('do_fetch', 'depends', '
>> > wget-native:do_populate_sysroot')
>> >  0591:
>> > File: '/home/jarvis/poky/bitbake/lib/bb/fetch2/__init__.py', lineno:
>> 368,
>> > function: decodeurl
>> >  0364:"""
>> >  0365:
>> >  0366:m =
>> > re.compile('(?P[^:]*)://((?P[^/;]+)@)?(?P<
>> location>[^;]+)(;(?P.*))?').match(url)
>> >  0367:if not m:
>> >  *** 0368:raise MalformedUrl(url)
>> >  0369:
>> >  0370:type = m.group('type')
>> >  0371:location = m.group('location')
>> >  0372:if not location:
>> > Exception: bb.fetch2.MalformedUrl: The URL:
>> > '${MISC_GIT_URI}/${MISC_GIT_PREFIX}ltp.git;protocol=${MISC_GIT_PROTOCOL}'
>> is
>> > invalid and cannot be interpreted
>> >
>> > ERROR:
>> > /home/jarvis/poky/meta-debian/recipes-misc/qemu/qemu-bios-
>> native_1.7.0.bb:
>> > Error executing a python function in :
>> >
>> > The stack trace of python calls that resulted in this exception/failure
>> was:
>> > File: '', lineno: 3, function: 
>> >  0001:__anon_25__home_jarvis_poky_meta_classes_patch_bbclass(d)
>> >  0002:__anon_160__home_jarvis_poky_meta_classes_base_bbclass(d)
>> >  *** 0003:__anon_686__home_jarvis_poky_meta_classes_base_bbclass(d)
>> >  0004:__anon_1305__home_jarvis_poky_meta_classes_insane_bbclass(d)
>> >  0005:__anon_250__home_jarvis_poky_meta_classes_package_bbclass(d)
>> >  0006:__anon_352__home_jarvis_poky_meta_classes_package_deb_
>> bbclass(d)
>> >  0007:__anon_25__home_jarvis_poky_meta_classes_debian_bbclass(d)
>> > File: '/home/jarvis/poky/meta/classes/base.bbclass', lineno: 587,
>> function:
>> > __anon_686__home_jarvis_poky_meta_classes_base_bbclass
>> >  0583:needsrcrev = False
>> >  0584:srcuri = d.

Re: [OE-core] [meta-debian] build error

2018-03-25 Thread Rajath C S

Ok, thanks for the clarification.

On Mon, 26 Mar 2018, 01:21 Burton, Ross, <ross.bur...@intel.com> wrote:

> Speaking as an oe-core maintainer, we don't support meta-debian: use
> it at your own risk.
>
> Ross
>
> On 25 March 2018 at 20:49, Rajath C S <rajathcs.1...@gmail.com> wrote:
> > Hi,
> >
> > I am encountering the below error while building meta-debian (which is
> added
> > in bblayer.conf)
> >
> > ERROR: /home/jarvis/poky/meta-debian/recipes-misc/ltp/ltp_git.bb: Error
> > executing a python function in :
> >
> > The stack trace of python calls that resulted in this exception/failure
> was:
> > File: '', lineno: 3, function: 
> >  0001:__anon_25__home_jarvis_poky_meta_classes_patch_bbclass(d)
> >  0002:__anon_160__home_jarvis_poky_meta_classes_base_bbclass(d)
> >  *** 0003:__anon_686__home_jarvis_poky_meta_classes_base_bbclass(d)
> >  0004:__anon_1305__home_jarvis_poky_meta_classes_insane_bbclass(d)
> >  0005:__anon_250__home_jarvis_poky_meta_classes_package_bbclass(d)
> >
> 0006:__anon_352__home_jarvis_poky_meta_classes_package_deb_bbclass(d)
> >  0007:__anon_25__home_jarvis_poky_meta_classes_debian_bbclass(d)
> > File: '/home/jarvis/poky/meta/classes/base.bbclass', lineno: 587,
> function:
> > __anon_686__home_jarvis_poky_meta_classes_base_bbclass
> >  0583:needsrcrev = False
> >  0584:srcuri = d.getVar('SRC_URI')
> >  0585:for uri in srcuri.split():
> >  0586:(scheme, _ , path) = bb.fetch.decodeurl(uri)[:3]
> >  *** 0587:
> >  0588:# HTTP/FTP use the wget fetcher
> >  0589:if scheme in ("http", "https", "ftp"):
> >  0590:d.appendVarFlag('do_fetch', 'depends', '
> > wget-native:do_populate_sysroot')
> >  0591:
> > File: '/home/jarvis/poky/bitbake/lib/bb/fetch2/__init__.py', lineno: 368,
> > function: decodeurl
> >  0364:"""
> >  0365:
> >  0366:m =
> >
> re.compile('(?P[^:]*)://((?P[^/;]+)@)?(?P[^;]+)(;(?P.*))?').match(url)
> >  0367:if not m:
> >  *** 0368:raise MalformedUrl(url)
> >  0369:
> >  0370:type = m.group('type')
> >  0371:location = m.group('location')
> >  0372:if not location:
> > Exception: bb.fetch2.MalformedUrl: The URL:
> >
> '${MISC_GIT_URI}/${MISC_GIT_PREFIX}ltp.git;protocol=${MISC_GIT_PROTOCOL}' is
> > invalid and cannot be interpreted
> >
> > ERROR:
> > /home/jarvis/poky/meta-debian/recipes-misc/qemu/
> qemu-bios-native_1.7.0.bb:
> > Error executing a python function in :
> >
> > The stack trace of python calls that resulted in this exception/failure
> was:
> > File: '', lineno: 3, function: 
> >  0001:__anon_25__home_jarvis_poky_meta_classes_patch_bbclass(d)
> >  0002:__anon_160__home_jarvis_poky_meta_classes_base_bbclass(d)
> >  *** 0003:__anon_686__home_jarvis_poky_meta_classes_base_bbclass(d)
> >  0004:__anon_1305__home_jarvis_poky_meta_classes_insane_bbclass(d)
> >  0005:__anon_250__home_jarvis_poky_meta_classes_package_bbclass(d)
> >
> 0006:__anon_352__home_jarvis_poky_meta_classes_package_deb_bbclass(d)
> >  0007:__anon_25__home_jarvis_poky_meta_classes_debian_bbclass(d)
> > File: '/home/jarvis/poky/meta/classes/base.bbclass', lineno: 587,
> function:
> > __anon_686__home_jarvis_poky_meta_classes_base_bbclass
> >  0583:needsrcrev = False
> >  0584:srcuri = d.getVar('SRC_URI')
> >  0585:for uri in srcuri.split():
> >  0586:(scheme, _ , path) = bb.fetch.decodeurl(uri)[:3]
> >  *** 0587:
> >  0588:# HTTP/FTP use the wget fetcher
> >  0589:if scheme in ("http", "https", "ftp"):
> >  0590:d.appendVarFlag('do_fetch', 'depends', '
> > wget-native:do_populate_sysroot')
> >  0591:
> > File: '/home/jarvis/poky/bitbake/lib/bb/fetch2/__init__.py', lineno: 368,
> > function: decodeurl
> >  0364:"""
> >  0365:
> >  0366:m =
> >
> re.compile('(?P[^:]*)://((?P[^/;]+)@)?(?P[^;]+)(;(?P.*))?').match(url)
> >  0367:if not m:
> >  *** 0368:raise MalformedUrl(url)
> >  0369:
> >  0370:type = m.group('type')
> >  0371:location = m.group('location')
> >  0372:if not location:
> > Exception: bb.fetch2.MalformedUrl: The URL:
> >
> '${MISC_GIT_URI}/${MISC_GIT_PREFIX}qemu.git;protocol=${MISC_GI

[OE-core] [meta-debian] build error

2018-03-25 Thread Rajath C S

Hi,

I am encountering the below error while building meta-debian (which is
added in bblayer.conf)

ERROR: /home/jarvis/poky/meta-debian/recipes-misc/ltp/ltp_git.bb: Error
executing a python function in :

The stack trace of python calls that resulted in this exception/failure was:
File: '', lineno: 3, function: 
 0001:__anon_25__home_jarvis_poky_meta_classes_patch_bbclass(d)
 0002:__anon_160__home_jarvis_poky_meta_classes_base_bbclass(d)
 *** 0003:__anon_686__home_jarvis_poky_meta_classes_base_bbclass(d)
 0004:__anon_1305__home_jarvis_poky_meta_classes_insane_bbclass(d)
 0005:__anon_250__home_jarvis_poky_meta_classes_package_bbclass(d)
 0006:__anon_352__home_jarvis_poky_meta_classes_package_deb_bbclass(d)
 0007:__anon_25__home_jarvis_poky_meta_classes_debian_bbclass(d)
File: '/home/jarvis/poky/meta/classes/base.bbclass', lineno: 587, function:
__anon_686__home_jarvis_poky_meta_classes_base_bbclass
 0583:needsrcrev = False
 0584:srcuri = d.getVar('SRC_URI')
 0585:for uri in srcuri.split():
 0586:(scheme, _ , path) = bb.fetch.decodeurl(uri)[:3]
 *** 0587:
 0588:# HTTP/FTP use the wget fetcher
 0589:if scheme in ("http", "https", "ftp"):
 0590:d.appendVarFlag('do_fetch', 'depends', '
wget-native:do_populate_sysroot')
 0591:
File: '/home/jarvis/poky/bitbake/lib/bb/fetch2/__init__.py', lineno: 368,
function: decodeurl
 0364:"""
 0365:
 0366:m =
re.compile('(?P[^:]*)://((?P[^/;]+)@)?(?P[^;]+)(;(?P.*))?').match(url)
 0367:if not m:
 *** 0368:raise MalformedUrl(url)
 0369:
 0370:type = m.group('type')
 0371:location = m.group('location')
 0372:if not location:
Exception: bb.fetch2.MalformedUrl: The URL:
'${MISC_GIT_URI}/${MISC_GIT_PREFIX}ltp.git;protocol=${MISC_GIT_PROTOCOL}'
is invalid and cannot be interpreted

ERROR: /home/jarvis/poky/meta-debian/recipes-misc/qemu/
qemu-bios-native_1.7.0.bb: Error executing a python function in :

The stack trace of python calls that resulted in this exception/failure was:
File: '', lineno: 3, function: 
 0001:__anon_25__home_jarvis_poky_meta_classes_patch_bbclass(d)
 0002:__anon_160__home_jarvis_poky_meta_classes_base_bbclass(d)
 *** 0003:__anon_686__home_jarvis_poky_meta_classes_base_bbclass(d)
 0004:__anon_1305__home_jarvis_poky_meta_classes_insane_bbclass(d)
 0005:__anon_250__home_jarvis_poky_meta_classes_package_bbclass(d)
 0006:__anon_352__home_jarvis_poky_meta_classes_package_deb_bbclass(d)
 0007:__anon_25__home_jarvis_poky_meta_classes_debian_bbclass(d)
File: '/home/jarvis/poky/meta/classes/base.bbclass', lineno: 587, function:
__anon_686__home_jarvis_poky_meta_classes_base_bbclass
 0583:needsrcrev = False
 0584:srcuri = d.getVar('SRC_URI')
 0585:for uri in srcuri.split():
 0586:(scheme, _ , path) = bb.fetch.decodeurl(uri)[:3]
 *** 0587:
 0588:# HTTP/FTP use the wget fetcher
 0589:if scheme in ("http", "https", "ftp"):
 0590:d.appendVarFlag('do_fetch', 'depends', '
wget-native:do_populate_sysroot')
 0591:
File: '/home/jarvis/poky/bitbake/lib/bb/fetch2/__init__.py', lineno: 368,
function: decodeurl
 0364:"""
 0365:
 0366:m =
re.compile('(?P[^:]*)://((?P[^/;]+)@)?(?P[^;]+)(;(?P.*))?').match(url)
 0367:if not m:
 *** 0368:raise MalformedUrl(url)
 0369:
 0370:type = m.group('type')
 0371:location = m.group('location')
 0372:if not location:
Exception: bb.fetch2.MalformedUrl: The URL:
'${MISC_GIT_URI}/${MISC_GIT_PREFIX}qemu.git;protocol=${MISC_GIT_PROTOCOL};branch=stable-2.1'
is invalid and cannot be interpreted

ERROR: /home/jarvis/poky/meta-debian/recipes-kernel/linux-libc-headers/
linux-libc-headers-base_git.bb: Error executing a python function in :

The stack trace of python calls that resulted in this exception/failure was:
File: '', lineno: 3, function: 
 0001:__anon_25__home_jarvis_poky_meta_classes_patch_bbclass(d)
 0002:__anon_160__home_jarvis_poky_meta_classes_base_bbclass(d)
 *** 0003:__anon_686__home_jarvis_poky_meta_classes_base_bbclass(d)
 0004:__anon_1305__home_jarvis_poky_meta_classes_insane_bbclass(d)
 0005:__anon_250__home_jarvis_poky_meta_classes_package_bbclass(d)
 0006:__anon_352__home_jarvis_poky_meta_classes_package_deb_bbclass(d)
 0007:__anon_25__home_jarvis_poky_meta_classes_debian_bbclass(d)
File: '/home/jarvis/poky/meta/classes/base.bbclass', lineno: 587, function:
__anon_686__home_jarvis_poky_meta_classes_base_bbclass
 0583:needsrcrev = False
 0584:srcuri = d.getVar('SRC_URI')
 0585:for uri in srcuri.split():
 0586:(scheme, _ , path) = bb.fetch.decodeurl(uri)[:3]
 *** 0587:
 0588:# HTTP/FTP use the wget fetcher
 0589:if scheme in ("http", "https", "ftp"):
 0590:d.appendVarFlag('do_fetch', 'depends', '

[OE-core] [oe-core] dependency query

2018-03-23 Thread Rajath C S

when i open a particular recipe on layer.openembeded site it showcases
something called dependencies does it mean that those list under the
dependencies should be included in CORE_IMAGE_EXTRA_INSTALL??

Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [meta-ros] ros package import problem

2018-03-23 Thread Rajath C S

i have added rospy and roslib to CORE_IMAGE_EXTRA_INSTALL += in local.conf
but when i go to the python terminal in poky and import rospy and roslib it
is unable to do so

any solution would be of great help thanks

Rajath C S
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-chicken][oe-core] networking

2018-03-22 Thread Rajath C S

If it is like : my kernel doesn't support the WiFi hardware then either of
the below things must be a possibility
1. I can install a external WiFi adapter and check for that button in Sato
2. I can install kernel WiFi drivers
   2a. Are there  built WiFi drivers for poky ?

On Fri, 23 Mar 2018, 00:49 Burton, Ross, <ross.bur...@intel.com> wrote:

> As I said yesterday, core-image-sato ships with connman already.  If
> the networking UI doesn't have a big [ ] Turn Wifi On button then the
> problem is that your kernel doesn't support the wifi hardware.
>
> Ross
>
> On 22 March 2018 at 17:50, Rajath C S <rajathcs.1...@gmail.com> wrote:
> > Can you help me setup WiFi connection to poky?
> > Im highly struggling with this, I have placed connman in local.conf file
> ,
> > what next is the procedure such that my poky on qemu can detect the WiFi?
> > Thanks
> >
> > On Thu, 22 Mar 2018, 23:18 Rajath C S, <rajathcs.1...@gmail.com> wrote:
> >>
> >> Cool, thanks!
> >>
> >> On Thu, 22 Mar 2018, 23:15 Burton, Ross, <ross.bur...@intel.com> wrote:
> >>>
> >>> It contains a CSV module for the Scheme language, it isn't anything
> >>> for the user to use.
> >>>
> >>> CSV files are plain text so any text editor will do.  oe-core has a
> >>> vi-clone as part of busybox, or l3afpad if you want something
> >>> graphical.  meta-oe has the usual Linux editors: vim, nano, joe.
> >>>
> >>> Ross
> >>>
> >>> On 22 March 2018 at 17:41, Rajath C S <rajathcs.1...@gmail.com> wrote:
> >>> > Thanks for the tip! But meta-chicken contains a CSV formatter since I
> >>> > need a
> >>> > CSV editor to my image I thought of using meta-chicken.
> >>> > Do you know of any other recipes that has the features of CSV editor?
> >>> > Thanks
> >>> >
> >>> > On Thu, 22 Mar 2018, 23:09 Burton, Ross, <ross.bur...@intel.com>
> wrote:
> >>> >>
> >>> >> That's a failure in meta-chicken, which isn't part of oe-core.
> >>> >>
> >>> >> If you need to use meta-chicken then please contact the maintainers
> of
> >>> >> meta-chicken directly.  I do have to wonder if you actually need
> >>> >> meta-chicken though.
> >>> >>
> >>> >> Ross
> >>> >>
> >>> >> On 22 March 2018 at 17:34, Rajath C S <rajathcs.1...@gmail.com>
> wrote:
> >>> >> > I was including a csv-editor and this error popped up, any
> >>> >> > solutions?
> >>> >> >
> >>> >> > WARNING: chicken-4.12.0-r0 do_prepare_recipe_sysroot: Manifest
> >>> >> >
> >>> >> >
> >>> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >>> >> > not found?
> >>> >> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_fetch: Manifest
> >>> >> >
> >>> >> >
> >>> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >>> >> > not found?
> >>> >> > WARNING: chicken-egg-typeclass-cross-1.3-r0 do_fetch: Manifest
> >>> >> >
> >>> >> >
> >>> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >>> >> > not found?
> >>> >> > WARNING: chicken-egg-regex-cross-1.0-r0 do_fetch: Manifest
> >>> >> >
> >>> >> >
> >>> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >>> >> > not found?
> >>> >> > WARNING: chicken-egg-matchable-3.7-r0 do_fetch: Manifest
> >>> >> >
> >>> >> >
> >>> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >>> >> > not found?
> >>> >> > WARNING: chicken-egg-make-cross-1.8-r0 do_fetch: Manifest
> >>> >> >
> >>> >> >
> >>> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >>> >> > not found?
> >>> >> > WARNING: chicken-egg-iset-cross-2.0-r0 do_fetch: Manifest
>

Re: [OE-core] [oe-core] package inclusion and networking

2018-03-22 Thread Rajath C S

Yes I am using Sato only , but I'm not getting how to connect it to WiFi.
Like : I can notice a button on top right but how do i configure it?



On Thu, 22 Mar 2018, 23:43 Khem Raj, <raj.k...@gmail.com> wrote:

> use core-image-sato and it has UI to connect to wifi
>
> On Thu, Mar 22, 2018 at 10:53 AM, Rajath C S <rajathcs.1...@gmail.com>
> wrote:
> > Thanks, I'll check it out.
> >
> > Can you help me setup WiFi connection to poky?
> > Im highly struggling with this, I have placed connman in local.conf file
> ,
> > what next is the procedure such that my poky on qemu can detect the WiFi?
> > Thanks
> >
> > On Thu, 22 Mar 2018, 14:43 Khem Raj, <raj.k...@gmail.com> wrote:
> >>
> >> On Wed, Mar 21, 2018 at 9:58 PM, Rajath C S <rajathcs.1...@gmail.com>
> >> wrote:
> >> > Can i install tensorflow and h5py (since they are not there as
> recipes)
> >> > using Internet on yocto? (just the way they are installed on ubuntu or
> >> > other
> >> > host OS)
> >> >
> >>
> >> may be you can use on device SDK and build it natively on
> >> your target
> >>
> >> EXTRA_IMAGE_FEATURES_append = " tools-sdk"
> >> IMAGE_INSTALL_append = " python coreutils findutils git zlib tar"
> >>
> >> then checkout the sources on target and build it. You might need more
> >> packages then keep adding them to IMAGE_INSTALL and rebuilding image
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [oe-core] package inclusion and networking

2018-03-22 Thread Rajath C S

Thanks, I'll check it out.

Can you help me setup WiFi connection to poky?
Im highly struggling with this, I have placed connman in local.conf file ,
what next is the procedure such that my poky on qemu can detect the WiFi?
Thanks

On Thu, 22 Mar 2018, 14:43 Khem Raj, <raj.k...@gmail.com> wrote:

> On Wed, Mar 21, 2018 at 9:58 PM, Rajath C S <rajathcs.1...@gmail.com>
> wrote:
> > Can i install tensorflow and h5py (since they are not there as recipes)
> > using Internet on yocto? (just the way they are installed on ubuntu or
> other
> > host OS)
> >
>
> may be you can use on device SDK and build it natively on
> your target
>
> EXTRA_IMAGE_FEATURES_append = " tools-sdk"
> IMAGE_INSTALL_append = " python coreutils findutils git zlib tar"
>
> then checkout the sources on target and build it. You might need more
> packages then keep adding them to IMAGE_INSTALL and rebuilding image
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-chicken][oe-core] networking

2018-03-22 Thread Rajath C S

Can you help me setup WiFi connection to poky?
Im highly struggling with this, I have placed connman in local.conf file ,
what next is the procedure such that my poky on qemu can detect the WiFi?
Thanks

On Thu, 22 Mar 2018, 23:18 Rajath C S, <rajathcs.1...@gmail.com> wrote:

> Cool, thanks!
>
> On Thu, 22 Mar 2018, 23:15 Burton, Ross, <ross.bur...@intel.com> wrote:
>
>> It contains a CSV module for the Scheme language, it isn't anything
>> for the user to use.
>>
>> CSV files are plain text so any text editor will do.  oe-core has a
>> vi-clone as part of busybox, or l3afpad if you want something
>> graphical.  meta-oe has the usual Linux editors: vim, nano, joe.
>>
>> Ross
>>
>> On 22 March 2018 at 17:41, Rajath C S <rajathcs.1...@gmail.com> wrote:
>> > Thanks for the tip! But meta-chicken contains a CSV formatter since I
>> need a
>> > CSV editor to my image I thought of using meta-chicken.
>> > Do you know of any other recipes that has the features of CSV editor?
>> > Thanks
>> >
>> > On Thu, 22 Mar 2018, 23:09 Burton, Ross, <ross.bur...@intel.com> wrote:
>> >>
>> >> That's a failure in meta-chicken, which isn't part of oe-core.
>> >>
>> >> If you need to use meta-chicken then please contact the maintainers of
>> >> meta-chicken directly.  I do have to wonder if you actually need
>> >> meta-chicken though.
>> >>
>> >> Ross
>> >>
>> >> On 22 March 2018 at 17:34, Rajath C S <rajathcs.1...@gmail.com> wrote:
>> >> > I was including a csv-editor and this error popped up, any solutions?
>> >> >
>> >> > WARNING: chicken-4.12.0-r0 do_prepare_recipe_sysroot: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_fetch: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-typeclass-cross-1.3-r0 do_fetch: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-regex-cross-1.0-r0 do_fetch: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-matchable-3.7-r0 do_fetch: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-make-cross-1.8-r0 do_fetch: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-iset-cross-2.0-r0 do_fetch: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_patch: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-matchable-cross-3.7-r0
>> do_prepare_recipe_sysroot:
>> >> > Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > WARNING: chicken-egg-utf8-cross-3.4.4-r0 do_fetch: Manifest
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
>> >> > not found?
>> >> > ERROR: chicken-egg-matchable-cross-3.7-r0 do_install: Function
>> failed:
>> >> > do_install (log file is located at
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926)
>> >> > ERROR: Logfile of failure stored in:
>> >> >
>> >> >
>> /home/jarvis/poky/build/tmp/work/

Re: [OE-core] [meta-chicken][oe-core]

2018-03-22 Thread Rajath C S

Cool, thanks!

On Thu, 22 Mar 2018, 23:15 Burton, Ross, <ross.bur...@intel.com> wrote:

> It contains a CSV module for the Scheme language, it isn't anything
> for the user to use.
>
> CSV files are plain text so any text editor will do.  oe-core has a
> vi-clone as part of busybox, or l3afpad if you want something
> graphical.  meta-oe has the usual Linux editors: vim, nano, joe.
>
> Ross
>
> On 22 March 2018 at 17:41, Rajath C S <rajathcs.1...@gmail.com> wrote:
> > Thanks for the tip! But meta-chicken contains a CSV formatter since I
> need a
> > CSV editor to my image I thought of using meta-chicken.
> > Do you know of any other recipes that has the features of CSV editor?
> > Thanks
> >
> > On Thu, 22 Mar 2018, 23:09 Burton, Ross, <ross.bur...@intel.com> wrote:
> >>
> >> That's a failure in meta-chicken, which isn't part of oe-core.
> >>
> >> If you need to use meta-chicken then please contact the maintainers of
> >> meta-chicken directly.  I do have to wonder if you actually need
> >> meta-chicken though.
> >>
> >> Ross
> >>
> >> On 22 March 2018 at 17:34, Rajath C S <rajathcs.1...@gmail.com> wrote:
> >> > I was including a csv-editor and this error popped up, any solutions?
> >> >
> >> > WARNING: chicken-4.12.0-r0 do_prepare_recipe_sysroot: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_fetch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-typeclass-cross-1.3-r0 do_fetch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-regex-cross-1.0-r0 do_fetch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-matchable-3.7-r0 do_fetch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-make-cross-1.8-r0 do_fetch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-iset-cross-2.0-r0 do_fetch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_patch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_prepare_recipe_sysroot:
> >> > Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > WARNING: chicken-egg-utf8-cross-3.4.4-r0 do_fetch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> > ERROR: chicken-egg-matchable-cross-3.7-r0 do_install: Function failed:
> >> > do_install (log file is located at
> >> >
> >> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926)
> >> > ERROR: Logfile of failure stored in:
> >> >
> >> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926
> >> > Log data follows:
> >> > | DEBUG: Executing shell function do_install
> >> > |
> >> >
> >> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/run.do_install.17926:
> >> > 113:
> >> >
> >> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/run.do_install.17926:
> >> > i586-poky-linux-chicken-install: not found
> >> > | WARNING: exit code 127 from a shell command.
> >> > | ERROR: Function failed: do_install (log file is located at
> >> >
> >> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926)
> >> > ERROR: Task
> >> >
> >> >
> (virtual:cross:/home/jarvis/poky/meta-chicken/recipes-chicken/chicken-egg/chicken-egg-matchable_3.7.bb:
> do_install)
> >> > failed with exit code '1'
> >> > WARNING: chicken-egg-typeclass-1.3-r0 do_fetch: Manifest
> >> >
> >> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> >> > not found?
> >> >
> >> >
> >> >
> >> > Thanks
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-chicken][oe-core]

2018-03-22 Thread Rajath C S

Thanks for the tip! But meta-chicken contains a CSV formatter since I need
a CSV editor to my image I thought of using meta-chicken.
Do you know of any other recipes that has the features of CSV editor?
Thanks

On Thu, 22 Mar 2018, 23:09 Burton, Ross, <ross.bur...@intel.com> wrote:

> That's a failure in meta-chicken, which isn't part of oe-core.
>
> If you need to use meta-chicken then please contact the maintainers of
> meta-chicken directly.  I do have to wonder if you actually need
> meta-chicken though.
>
> Ross
>
> On 22 March 2018 at 17:34, Rajath C S <rajathcs.1...@gmail.com> wrote:
> > I was including a csv-editor and this error popped up, any solutions?
> >
> > WARNING: chicken-4.12.0-r0 do_prepare_recipe_sysroot: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_fetch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-typeclass-cross-1.3-r0 do_fetch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-regex-cross-1.0-r0 do_fetch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-matchable-3.7-r0 do_fetch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-make-cross-1.8-r0 do_fetch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-iset-cross-2.0-r0 do_fetch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_patch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-matchable-cross-3.7-r0 do_prepare_recipe_sysroot:
> > Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > WARNING: chicken-egg-utf8-cross-3.4.4-r0 do_fetch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> > ERROR: chicken-egg-matchable-cross-3.7-r0 do_install: Function failed:
> > do_install (log file is located at
> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926)
> > ERROR: Logfile of failure stored in:
> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926
> > Log data follows:
> > | DEBUG: Executing shell function do_install
> > |
> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/run.do_install.17926:
> > 113:
> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/run.do_install.17926:
> > i586-poky-linux-chicken-install: not found
> > | WARNING: exit code 127 from a shell command.
> > | ERROR: Function failed: do_install (log file is located at
> >
> /home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926)
> > ERROR: Task
> >
> (virtual:cross:/home/jarvis/poky/meta-chicken/recipes-chicken/chicken-egg/chicken-egg-matchable_3.7.bb:
> do_install)
> > failed with exit code '1'
> > WARNING: chicken-egg-typeclass-1.3-r0 do_fetch: Manifest
> >
> /home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
> > not found?
> >
> >
> >
> > Thanks
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [meta-chicken][oe-core]

2018-03-22 Thread Rajath C S

I was including a csv-editor and this error popped up, any solutions?

WARNING: chicken-4.12.0-r0 do_prepare_recipe_sysroot: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-matchable-cross-3.7-r0 do_fetch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-typeclass-cross-1.3-r0 do_fetch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-regex-cross-1.0-r0 do_fetch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-matchable-3.7-r0 do_fetch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-make-cross-1.8-r0 do_fetch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-iset-cross-2.0-r0 do_fetch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-matchable-cross-3.7-r0 do_patch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-matchable-cross-3.7-r0 do_prepare_recipe_sysroot:
Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
WARNING: chicken-egg-utf8-cross-3.4.4-r0 do_fetch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?
ERROR: chicken-egg-matchable-cross-3.7-r0 do_install: Function failed:
do_install (log file is located at
/home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926)
ERROR: Logfile of failure stored in:
/home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926
Log data follows:
| DEBUG: Executing shell function do_install
|
/home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/run.do_install.17926:
113:
/home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/run.do_install.17926:
i586-poky-linux-chicken-install: not found
| WARNING: exit code 127 from a shell command.
| ERROR: Function failed: do_install (log file is located at
/home/jarvis/poky/build/tmp/work/x86_64-linux/chicken-egg-matchable-cross/3.7-r0/temp/log.do_install.17926)
ERROR: Task
(virtual:cross:/home/jarvis/poky/meta-chicken/recipes-chicken/chicken-egg/chicken-egg-matchable_3.7.bb:do_install)
failed with exit code '1'
WARNING: chicken-egg-typeclass-1.3-r0 do_fetch: Manifest
/home/jarvis/poky/build/tmp/sstate-control/manifest-allarch-chicken-cross.populate_sysroot
not found?



Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] QUERY regarding package inclusion - Yocto

2018-03-22 Thread Rajath C S

i'd like to know if the recipe named 'tensorrt' in the layer 'meta-tegra'
equivalent to tensorflow? Because i need to install tensorflow packages on
to my yocto image and there are no recipes for it

Rajath C S,
9964182112,
Bangalore - 560060

On Thu, Mar 22, 2018 at 1:16 PM, Rajath C S <rajathcs.1...@gmail.com> wrote:

> Hi Vincent,
>
>
> where should i be adding this line i mean in which file?
> DEPENDS = "python3-numpy python3-dev python3-pip python3-wheel"
>
> Thanks
>
> Rajath C S,
> 9964182112,
> Bangalore - 560060
>
> On Wed, Mar 21, 2018 at 3:24 PM, Vincent Prince <
> vincent.prince...@gmail.com> wrote:
>
>> Hi,
>>
>> There is no support for those yet, so you need to create recipes for
>> them.
>>
>> You can use devtool workflow to do so, i suggest you to look at this
>> video
>> https://www.youtube.com/watch?v=CiD7rB35CRE
>>
>> Every recipes are quite different and reflects how you build them by
>> hand.
>>
>> For tensorflow, first step will be
>> devtool add tensorflow https://github.com/tensorflow/tensorflow
>>
>> Then, you need to look at https://www.tensorflow.org/
>> install/install_sources, and translate it into yocto recipe.
>> For instance, it says it depends on several python packages, so in recipe
>> you will probably need to add those with:
>>
>> DEPENDS = "python3-numpy python3-dev python3-pip python3-wheel"
>>
>> You can look at those url too:
>> https://github.com/snipsco/tensorflow-build
>> https://github.com/madisongh/meta-tegra/blob/master/recipes-
>> devtools/gie/tensorrt_2.1-20170614-1-1.bb
>> https://groups.google.com/forum/?utm_medium=email_source
>> =footer#!msg/bazel-discuss/TmBDKmoEvlI/GXng74b_AAAJ
>> https://stackoverflow.com/questions/36545388/use-pip-install
>> -command-in-recipes-yocto-project
>>
>> It's a hard job, and as seems new to Yocto, I suggest you to hire some
>> guy, or at least try to create easier recipes before.
>>
>> Cheers
>>
>>
>>
>> 2018-03-20 5:37 GMT+01:00 Rajath C S <rajathcs.1...@gmail.com>:
>>
>>> Dear Vincent,
>>>
>>> I am working on yocto from few weeks and my current goal is to include
>>> few set of packages.
>>> Initially i thought i will download the repo of those packages and
>>> compile them and copy the compiled binaries to yocto image, apparently
>>> which i dint know how exactly to be done. So, i followed the method of
>>> recipe & layers.
>>>
>>> Now i need to include *'keras'* and* 'tensorflow'* packages in Poky, i
>>> am not able to find any source that helps me do it and i dont know how to
>>> do it from source. Could you please guide me through this (either the
>>> recipe way or compiling from source way is fine)
>>>
>>> Thank You,
>>>
>>> Rajath C S,
>>> 9964182112,
>>> Bangalore - 560060
>>>
>>>
>>>
>>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] QUERY regarding package inclusion - Yocto

2018-03-22 Thread Rajath C S

Hi Vincent,


where should i be adding this line i mean in which file?
DEPENDS = "python3-numpy python3-dev python3-pip python3-wheel"

Thanks

Rajath C S,
9964182112,
Bangalore - 560060

On Wed, Mar 21, 2018 at 3:24 PM, Vincent Prince <vincent.prince...@gmail.com
> wrote:

> Hi,
>
> There is no support for those yet, so you need to create recipes for them.
>
> You can use devtool workflow to do so, i suggest you to look at this video
> https://www.youtube.com/watch?v=CiD7rB35CRE
>
> Every recipes are quite different and reflects how you build them by hand.
>
> For tensorflow, first step will be
> devtool add tensorflow https://github.com/tensorflow/tensorflow
>
> Then, you need to look at https://www.tensorflow.org/
> install/install_sources, and translate it into yocto recipe.
> For instance, it says it depends on several python packages, so in recipe
> you will probably need to add those with:
>
> DEPENDS = "python3-numpy python3-dev python3-pip python3-wheel"
>
> You can look at those url too:
> https://github.com/snipsco/tensorflow-build
> https://github.com/madisongh/meta-tegra/blob/master/recipes-
> devtools/gie/tensorrt_2.1-20170614-1-1.bb
> https://groups.google.com/forum/?utm_medium=email_source
> =footer#!msg/bazel-discuss/TmBDKmoEvlI/GXng74b_AAAJ
> https://stackoverflow.com/questions/36545388/use-pip-install
> -command-in-recipes-yocto-project
>
> It's a hard job, and as seems new to Yocto, I suggest you to hire some
> guy, or at least try to create easier recipes before.
>
> Cheers
>
>
>
> 2018-03-20 5:37 GMT+01:00 Rajath C S <rajathcs.1...@gmail.com>:
>
>> Dear Vincent,
>>
>> I am working on yocto from few weeks and my current goal is to include
>> few set of packages.
>> Initially i thought i will download the repo of those packages and
>> compile them and copy the compiled binaries to yocto image, apparently
>> which i dint know how exactly to be done. So, i followed the method of
>> recipe & layers.
>>
>> Now i need to include *'keras'* and* 'tensorflow'* packages in Poky, i
>> am not able to find any source that helps me do it and i dont know how to
>> do it from source. Could you please guide me through this (either the
>> recipe way or compiling from source way is fine)
>>
>> Thank You,
>>
>> Rajath C S,
>> 9964182112,
>> Bangalore - 560060
>>
>>
>>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [oe-core] devtool add query

2018-03-22 Thread Rajath C S

hello all,

i am working on devtool and when i use 'devtool add' followed by the url,
can  this URL be a github repo because from the video source i was learning
dev tools the person teaching had added a tar.gz URL only; i wanted to know
if this URL can be a github repo too..??
Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [oe-core] package inclusion

2018-03-21 Thread Rajath C S

Can i install tensorflow and h5py (since they are not there as recipes)
using Internet on yocto? (just the way they are installed on ubuntu or
other host OS)

Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [oe-core] package installation

2018-03-21 Thread Rajath C S

i am to install h5py on yocto's image poky , the below is the repo of it
https://github.com/h5py/h5py

i'd like to know if there is its respective recipe avialble?

Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-openembeded] bug in adding network layer

2018-03-21 Thread Rajath C S

Cool, thanks!
So should I add connman to local.conf of poky to get WiFi connection?

On Wed, 21 Mar 2018, 17:10 Burton, Ross, <ross.bur...@intel.com> wrote:

> The Yocto kernel, as that is the kernel which is running.
>
> On 21 March 2018 at 11:36, Rajath C S <rajathcs.1...@gmail.com> wrote:
>
>> By kernel are you referring to the yocto's kernel or my host machine
>> kernel?
>>
>> if it is host machine kernel then i have the drivers
>> and , what should i do with connman?
>>
>> thanks
>>
>> Rajath C S,
>> 9964182112,
>> Bangalore - 560060
>>
>> On Wed, Mar 21, 2018 at 5:02 PM, Burton, Ross <ross.bur...@intel.com>
>> wrote:
>>
>>> I never mentioned glib-networking and it wont help at all.
>>>
>>> If connman can't see your wifi then your kernel is missing the drivers
>>>  you need.
>>>
>>> Ross
>>>
>>> On 21 March 2018 at 10:53, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>
>>>> yes, when clicked on it. it says Ethernet connection
>>>>
>>>> so, inside oe-core there is a folder and file called :
>>>> glib-networking_2.54.1.bb; so now acording to your second msg to
>>>> enable wifi should i include this file in MAGE_INSTALL_append command of
>>>> local.conf?
>>>>
>>>> Rajath C S,
>>>> 9964182112,
>>>> Bangalore - 560060
>>>>
>>>> On Wed, Mar 21, 2018 at 4:14 PM, Burton, Ross <ross.bur...@intel.com>
>>>> wrote:
>>>>
>>>>> Then you have a nice button in the top right to setup wifi already.
>>>>>
>>>>> Ross
>>>>>
>>>>> On 21 March 2018 at 10:42, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>>>
>>>>>> sure, i will look into that, thanks.
>>>>>> and , i am actually using core-image-sato
>>>>>>
>>>>>> regards,
>>>>>> Rajath C S
>>>>>>
>>>>>> Rajath C S,
>>>>>> 9964182112,
>>>>>> Bangalore - 560060
>>>>>>
>>>>>> On Wed, Mar 21, 2018 at 4:11 PM, Burton, Ross <ross.bur...@intel.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Ideally in an image of your own creation, as local.conf tweaking is
>>>>>>> for experimentation only.
>>>>>>>
>>>>>>> There's a section in the manual about customising images, and I
>>>>>>> recommend that you start from an image with functionality instead of
>>>>>>> starting from a minimal image and trying to discover how to do basics 
>>>>>>> such
>>>>>>> as make networking functional.
>>>>>>>
>>>>>>> Ross
>>>>>>>
>>>>>>> On 21 March 2018 at 10:35, Rajath C S <rajathcs.1...@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> so the  connman / ifupdown and wireless-tools have to be placed in
>>>>>>>> the local.conf file right?
>>>>>>>>
>>>>>>>> Rajath C S,
>>>>>>>> 9964182112,
>>>>>>>> Bangalore - 560060
>>>>>>>>
>>>>>>>> On Wed, Mar 21, 2018 at 3:57 PM, Burton, Ross <
>>>>>>>> ross.bur...@intel.com> wrote:
>>>>>>>>
>>>>>>>>> ifupdown and wireless-tools will give you the basics to configure
>>>>>>>>> it by hand, or use connman.  Or network-manager, in meta-oe.
>>>>>>>>>
>>>>>>>>> core-image-sato includes both connman and a UI to join to wifi.
>>>>>>>>>
>>>>>>>>> Ross
>>>>>>>>>
>>>>>>>>> On 21 March 2018 at 10:25, Rajath C S <rajathcs.1...@gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> thanks,
>>>>>>>>>>
>>>>>>>>>> i will follow the said things,
>>>>>>>>>>
>>>>>>>>>> but as of now my situation is as such : "
>>>>>>>>>> sure, i will have one other question that is how to establish
>&

Re: [OE-core] [meta-openembeded] bug in adding network layer

2018-03-21 Thread Rajath C S

By kernel are you referring to the yocto's kernel or my host machine kernel?

if it is host machine kernel then i have the drivers
and , what should i do with connman?

thanks

Rajath C S,
9964182112,
Bangalore - 560060

On Wed, Mar 21, 2018 at 5:02 PM, Burton, Ross <ross.bur...@intel.com> wrote:

> I never mentioned glib-networking and it wont help at all.
>
> If connman can't see your wifi then your kernel is missing the drivers
>  you need.
>
> Ross
>
> On 21 March 2018 at 10:53, Rajath C S <rajathcs.1...@gmail.com> wrote:
>
>> yes, when clicked on it. it says Ethernet connection
>>
>> so, inside oe-core there is a folder and file called :
>> glib-networking_2.54.1.bb; so now acording to your second msg to enable
>> wifi should i include this file in MAGE_INSTALL_append command of
>> local.conf?
>>
>> Rajath C S,
>> 9964182112,
>> Bangalore - 560060
>>
>> On Wed, Mar 21, 2018 at 4:14 PM, Burton, Ross <ross.bur...@intel.com>
>> wrote:
>>
>>> Then you have a nice button in the top right to setup wifi already.
>>>
>>> Ross
>>>
>>> On 21 March 2018 at 10:42, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>
>>>> sure, i will look into that, thanks.
>>>> and , i am actually using core-image-sato
>>>>
>>>> regards,
>>>> Rajath C S
>>>>
>>>> Rajath C S,
>>>> 9964182112,
>>>> Bangalore - 560060
>>>>
>>>> On Wed, Mar 21, 2018 at 4:11 PM, Burton, Ross <ross.bur...@intel.com>
>>>> wrote:
>>>>
>>>>> Ideally in an image of your own creation, as local.conf tweaking is
>>>>> for experimentation only.
>>>>>
>>>>> There's a section in the manual about customising images, and I
>>>>> recommend that you start from an image with functionality instead of
>>>>> starting from a minimal image and trying to discover how to do basics such
>>>>> as make networking functional.
>>>>>
>>>>> Ross
>>>>>
>>>>> On 21 March 2018 at 10:35, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>>>
>>>>>> so the  connman / ifupdown and wireless-tools have to be placed in
>>>>>> the local.conf file right?
>>>>>>
>>>>>> Rajath C S,
>>>>>> 9964182112,
>>>>>> Bangalore - 560060
>>>>>>
>>>>>> On Wed, Mar 21, 2018 at 3:57 PM, Burton, Ross <ross.bur...@intel.com>
>>>>>> wrote:
>>>>>>
>>>>>>> ifupdown and wireless-tools will give you the basics to configure it
>>>>>>> by hand, or use connman.  Or network-manager, in meta-oe.
>>>>>>>
>>>>>>> core-image-sato includes both connman and a UI to join to wifi.
>>>>>>>
>>>>>>> Ross
>>>>>>>
>>>>>>> On 21 March 2018 at 10:25, Rajath C S <rajathcs.1...@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> thanks,
>>>>>>>>
>>>>>>>> i will follow the said things,
>>>>>>>>
>>>>>>>> but as of now my situation is as such : "
>>>>>>>> sure, i will have one other question that is how to establish
>>>>>>>> internet connection on to poky?
>>>>>>>> that is , i have placed the meta-networking layer in bblayer.conf
>>>>>>>> file so after that which recipe should i add to local.conf so that 
>>>>>>>> wireless
>>>>>>>> connection is established on the poky?
>>>>>>>>
>>>>>>>> Do help with the steps
>>>>>>>>
>>>>>>>> Thanks"
>>>>>>>> I will try and implement networking from oe-core
>>>>>>>>
>>>>>>>>
>>>>>>>> Rajath C S,
>>>>>>>> 9964182112,
>>>>>>>> Bangalore - 560060
>>>>>>>>
>>>>>>>> On Wed, Mar 21, 2018 at 3:40 PM, Burton, Ross <
>>>>>>>> ross.bur...@intel.com> wrote:
>>>>>>>>
>>>>>>>>> First, you don't need meta-networking to make networking "

[OE-core] [oe-core] meta data error while building

2018-03-21 Thread Rajath C S

The below is the error while building core-image-sato, this error popped
after i including the line : PACKAGECONFIG_pn-opencv = "python2"

Please help me with the solution



   ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_configure,
the basehash value changed from 5d45ab9eb20c7583ac1edaab00e92e7d to
bed406587156555087b16ce65e70811f. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_compile,
the basehash value changed from 9b38ab297fe83e0397582fc241ec269b to
3e073d16f43dd6d1aafbfc77c0e5c193. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_install,
the basehash value changed from 4e71f923f6dce32b7d98e1a016de76c9 to
1cbe08c06c4c74f7f4765b2b5ca43449. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_build, the
basehash value changed from 77ff16e3d2d174337fc64b171c35e34c to
f8c231359c972ada4c1acdfeb4139a61. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_package,
the basehash value changed from bd69a16a7e8681701ed1bcb838350140 to
609508e260f4448bdecfa6fc14a648fc. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_packagedata,
the basehash value changed from 5536cec6dc8957b6d48670b030ca78d4 to
7f342767cb91e19d4718fd437a37e259. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_package_write_deb,
the basehash value changed from 87e31ea755f9b76dce7ae72fe34299b1 to
24719e85cf15c36f5b18cd6837841463. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_rootfs,
the basehash value changed from d3cb3148fa62977844e3acc707212156 to
41805c6e7544554ad2887c85ae8e. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_image, the
basehash value changed from f6b739ca1cfbc47bd8d14904c64d044b to
e1abbf58b56b9f1614a1f352f715a56f. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_image_complete,
the basehash value changed from 2ecdd58b8f372fb25ead31b8b04c47fa to
13be28bfaf5214958bd047d9c7682e24. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_image_tar,
the basehash value changed from 7ba819c63a822ea5f5e7ce817c642127 to
36b2b07ea59c24b0e089467790f51829. The metadata is not deterministic and
this needs to be fixed.
ERROR: When reparsing
/home/jarvis/poky/meta/recipes-sato/images/core-image-sato.bb.do_image_ext4,
the basehash value changed from 09e97f15239508528e29bb300d6a2c99 to
48adebf1ecd497028b62e8a19fd21e0d. The metadata is not deterministic and
this needs to be fixed.
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-openembeded] bug in adding network layer

2018-03-21 Thread Rajath C S

yes, when clicked on it. it says Ethernet connection

so, inside oe-core there is a folder and file called :
glib-networking_2.54.1.bb; so now acording to your second msg to enable
wifi should i include this file in MAGE_INSTALL_append command of
local.conf?

Rajath C S,
9964182112,
Bangalore - 560060

On Wed, Mar 21, 2018 at 4:14 PM, Burton, Ross <ross.bur...@intel.com> wrote:

> Then you have a nice button in the top right to setup wifi already.
>
> Ross
>
> On 21 March 2018 at 10:42, Rajath C S <rajathcs.1...@gmail.com> wrote:
>
>> sure, i will look into that, thanks.
>> and , i am actually using core-image-sato
>>
>> regards,
>> Rajath C S
>>
>> Rajath C S,
>> 9964182112,
>> Bangalore - 560060
>>
>> On Wed, Mar 21, 2018 at 4:11 PM, Burton, Ross <ross.bur...@intel.com>
>> wrote:
>>
>>> Ideally in an image of your own creation, as local.conf tweaking is for
>>> experimentation only.
>>>
>>> There's a section in the manual about customising images, and I
>>> recommend that you start from an image with functionality instead of
>>> starting from a minimal image and trying to discover how to do basics such
>>> as make networking functional.
>>>
>>> Ross
>>>
>>> On 21 March 2018 at 10:35, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>
>>>> so the  connman / ifupdown and wireless-tools have to be placed in the
>>>> local.conf file right?
>>>>
>>>> Rajath C S,
>>>> 9964182112,
>>>> Bangalore - 560060
>>>>
>>>> On Wed, Mar 21, 2018 at 3:57 PM, Burton, Ross <ross.bur...@intel.com>
>>>> wrote:
>>>>
>>>>> ifupdown and wireless-tools will give you the basics to configure it
>>>>> by hand, or use connman.  Or network-manager, in meta-oe.
>>>>>
>>>>> core-image-sato includes both connman and a UI to join to wifi.
>>>>>
>>>>> Ross
>>>>>
>>>>> On 21 March 2018 at 10:25, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>>>
>>>>>>
>>>>>> thanks,
>>>>>>
>>>>>> i will follow the said things,
>>>>>>
>>>>>> but as of now my situation is as such : "
>>>>>> sure, i will have one other question that is how to establish
>>>>>> internet connection on to poky?
>>>>>> that is , i have placed the meta-networking layer in bblayer.conf
>>>>>> file so after that which recipe should i add to local.conf so that 
>>>>>> wireless
>>>>>> connection is established on the poky?
>>>>>>
>>>>>> Do help with the steps
>>>>>>
>>>>>> Thanks"
>>>>>> I will try and implement networking from oe-core
>>>>>>
>>>>>>
>>>>>> Rajath C S,
>>>>>> 9964182112,
>>>>>> Bangalore - 560060
>>>>>>
>>>>>> On Wed, Mar 21, 2018 at 3:40 PM, Burton, Ross <ross.bur...@intel.com>
>>>>>> wrote:
>>>>>>
>>>>>>> First, you don't need meta-networking to make networking "work",
>>>>>>> because oe-core has the basics.
>>>>>>>
>>>>>>> Second, you need to match the release of layers.  You're using
>>>>>>> meta-networking master, and a previous release of poky.  Checkout the
>>>>>>> corresponding release branch of meta-networking.
>>>>>>>
>>>>>>> Ross
>>>>>>>
>>>>>>> On 21 March 2018 at 07:29, Rajath C S <rajathcs.1...@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> I am tryiing to add meta-networking layer (to get Internet
>>>>>>>> connection to poky)and i have included the following line of code in
>>>>>>>> bbconfig file
>>>>>>>> /home/jarvis/poky/meta-openembedded/meta-networking \
>>>>>>>>
>>>>>>>> but while building i get this below error
>>>>>>>>
>>>>>>>>
>>>>>>>> ERROR: ExpansionError during parsing /home/jarvis/poky/meta-openemb
>>>>>>>> edded/meta-networking/recipes-support/libtdb/libtdb_1.3.15.bb
>>>>>>>> Traceback (most recent call last):
>>>>>>>> bb.data_smart.ExpansionError: Failure expanding variable
>>>>>>>> do_compile, expression was python ./buildtools/bin/waf
>>>>>>>> ${@oe.utils.parallel_make_argument(d, '-j%d', limit=64)}
>>>>>>>>  which triggered exception AttributeError: module 'oe.utils' has no
>>>>>>>> attribute 'parallel_make_argument'
>>>>>>>>
>>>>>>>>
>>>>>>>> DO help,
>>>>>>>>
>>>>>>>> is there any other way to establish Internet connection inside poky?
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> ___
>>>>>>>> Openembedded-core mailing list
>>>>>>>> Openembedded-core@lists.openembedded.org
>>>>>>>> http://lists.openembedded.org/mailman/listinfo/openembedded-core
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-openembeded] bug in adding network layer

2018-03-21 Thread Rajath C S

sure, i will look into that, thanks.
and , i am actually using core-image-sato

regards,
Rajath C S

Rajath C S,
9964182112,
Bangalore - 560060

On Wed, Mar 21, 2018 at 4:11 PM, Burton, Ross <ross.bur...@intel.com> wrote:

> Ideally in an image of your own creation, as local.conf tweaking is for
> experimentation only.
>
> There's a section in the manual about customising images, and I recommend
> that you start from an image with functionality instead of starting from a
> minimal image and trying to discover how to do basics such as make
> networking functional.
>
> Ross
>
> On 21 March 2018 at 10:35, Rajath C S <rajathcs.1...@gmail.com> wrote:
>
>> so the  connman / ifupdown and wireless-tools have to be placed in the
>> local.conf file right?
>>
>> Rajath C S,
>> 9964182112,
>> Bangalore - 560060
>>
>> On Wed, Mar 21, 2018 at 3:57 PM, Burton, Ross <ross.bur...@intel.com>
>> wrote:
>>
>>> ifupdown and wireless-tools will give you the basics to configure it by
>>> hand, or use connman.  Or network-manager, in meta-oe.
>>>
>>> core-image-sato includes both connman and a UI to join to wifi.
>>>
>>> Ross
>>>
>>> On 21 March 2018 at 10:25, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>
>>>>
>>>> thanks,
>>>>
>>>> i will follow the said things,
>>>>
>>>> but as of now my situation is as such : "
>>>> sure, i will have one other question that is how to establish internet
>>>> connection on to poky?
>>>> that is , i have placed the meta-networking layer in bblayer.conf file
>>>> so after that which recipe should i add to local.conf so that wireless
>>>> connection is established on the poky?
>>>>
>>>> Do help with the steps
>>>>
>>>> Thanks"
>>>> I will try and implement networking from oe-core
>>>>
>>>>
>>>> Rajath C S,
>>>> 9964182112,
>>>> Bangalore - 560060
>>>>
>>>> On Wed, Mar 21, 2018 at 3:40 PM, Burton, Ross <ross.bur...@intel.com>
>>>> wrote:
>>>>
>>>>> First, you don't need meta-networking to make networking "work",
>>>>> because oe-core has the basics.
>>>>>
>>>>> Second, you need to match the release of layers.  You're using
>>>>> meta-networking master, and a previous release of poky.  Checkout the
>>>>> corresponding release branch of meta-networking.
>>>>>
>>>>> Ross
>>>>>
>>>>> On 21 March 2018 at 07:29, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>>>
>>>>>> I am tryiing to add meta-networking layer (to get Internet connection
>>>>>> to poky)and i have included the following line of code in bbconfig file
>>>>>> /home/jarvis/poky/meta-openembedded/meta-networking \
>>>>>>
>>>>>> but while building i get this below error
>>>>>>
>>>>>>
>>>>>> ERROR: ExpansionError during parsing /home/jarvis/poky/meta-openemb
>>>>>> edded/meta-networking/recipes-support/libtdb/libtdb_1.3.15.bb
>>>>>> Traceback (most recent call last):
>>>>>> bb.data_smart.ExpansionError: Failure expanding variable do_compile,
>>>>>> expression was python ./buildtools/bin/waf
>>>>>> ${@oe.utils.parallel_make_argument(d, '-j%d', limit=64)}
>>>>>>  which triggered exception AttributeError: module 'oe.utils' has no
>>>>>> attribute 'parallel_make_argument'
>>>>>>
>>>>>>
>>>>>> DO help,
>>>>>>
>>>>>> is there any other way to establish Internet connection inside poky?
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>> --
>>>>>> ___
>>>>>> Openembedded-core mailing list
>>>>>> Openembedded-core@lists.openembedded.org
>>>>>> http://lists.openembedded.org/mailman/listinfo/openembedded-core
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [meta-openembeded] bug in adding network layer

2018-03-21 Thread Rajath C S

so the  connman / ifupdown and wireless-tools have to be placed in the
local.conf file right?

Rajath C S,
9964182112,
Bangalore - 560060

On Wed, Mar 21, 2018 at 3:57 PM, Burton, Ross <ross.bur...@intel.com> wrote:

> ifupdown and wireless-tools will give you the basics to configure it by
> hand, or use connman.  Or network-manager, in meta-oe.
>
> core-image-sato includes both connman and a UI to join to wifi.
>
> Ross
>
> On 21 March 2018 at 10:25, Rajath C S <rajathcs.1...@gmail.com> wrote:
>
>>
>> thanks,
>>
>> i will follow the said things,
>>
>> but as of now my situation is as such : "
>> sure, i will have one other question that is how to establish internet
>> connection on to poky?
>> that is , i have placed the meta-networking layer in bblayer.conf file so
>> after that which recipe should i add to local.conf so that wireless
>> connection is established on the poky?
>>
>> Do help with the steps
>>
>> Thanks"
>> I will try and implement networking from oe-core
>>
>>
>> Rajath C S,
>> 9964182112,
>> Bangalore - 560060
>>
>> On Wed, Mar 21, 2018 at 3:40 PM, Burton, Ross <ross.bur...@intel.com>
>> wrote:
>>
>>> First, you don't need meta-networking to make networking "work", because
>>> oe-core has the basics.
>>>
>>> Second, you need to match the release of layers.  You're using
>>> meta-networking master, and a previous release of poky.  Checkout the
>>> corresponding release branch of meta-networking.
>>>
>>> Ross
>>>
>>> On 21 March 2018 at 07:29, Rajath C S <rajathcs.1...@gmail.com> wrote:
>>>
>>>> I am tryiing to add meta-networking layer (to get Internet connection
>>>> to poky)and i have included the following line of code in bbconfig file
>>>> /home/jarvis/poky/meta-openembedded/meta-networking \
>>>>
>>>> but while building i get this below error
>>>>
>>>>
>>>> ERROR: ExpansionError during parsing /home/jarvis/poky/meta-openemb
>>>> edded/meta-networking/recipes-support/libtdb/libtdb_1.3.15.bb
>>>> Traceback (most recent call last):
>>>> bb.data_smart.ExpansionError: Failure expanding variable do_compile,
>>>> expression was python ./buildtools/bin/waf
>>>> ${@oe.utils.parallel_make_argument(d, '-j%d', limit=64)}
>>>>  which triggered exception AttributeError: module 'oe.utils' has no
>>>> attribute 'parallel_make_argument'
>>>>
>>>>
>>>> DO help,
>>>>
>>>> is there any other way to establish Internet connection inside poky?
>>>>
>>>> Thanks
>>>>
>>>>
>>>> --
>>>> ___
>>>> Openembedded-core mailing list
>>>> Openembedded-core@lists.openembedded.org
>>>> http://lists.openembedded.org/mailman/listinfo/openembedded-core
>>>>
>>>>
>>>
>>
>>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] Fwd: [meta-openembeded] bug in adding network layer

2018-03-21 Thread Rajath C S

thanks,

i will follow the said things,

but as of now my situation is as such : "
sure, i will have one other question that is how to establish internet
connection on to poky?
that is , i have placed the meta-networking layer in bblayer.conf file so
after that which recipe should i add to local.conf so that wireless
connection is established on the poky?

Do help with the steps

Thanks"
I will try and implement networking from oe-core


Rajath C S,
9964182112,
Bangalore - 560060

On Wed, Mar 21, 2018 at 3:40 PM, Burton, Ross <ross.bur...@intel.com> wrote:

> First, you don't need meta-networking to make networking "work", because
> oe-core has the basics.
>
> Second, you need to match the release of layers.  You're using
> meta-networking master, and a previous release of poky.  Checkout the
> corresponding release branch of meta-networking.
>
> Ross
>
> On 21 March 2018 at 07:29, Rajath C S <rajathcs.1...@gmail.com> wrote:
>
>> I am tryiing to add meta-networking layer (to get Internet connection to
>> poky)and i have included the following line of code in bbconfig file
>> /home/jarvis/poky/meta-openembedded/meta-networking \
>>
>> but while building i get this below error
>>
>>
>> ERROR: ExpansionError during parsing /home/jarvis/poky/meta-openemb
>> edded/meta-networking/recipes-support/libtdb/libtdb_1.3.15.bb
>> Traceback (most recent call last):
>> bb.data_smart.ExpansionError: Failure expanding variable do_compile,
>> expression was python ./buildtools/bin/waf
>> ${@oe.utils.parallel_make_argument(d, '-j%d', limit=64)}
>>  which triggered exception AttributeError: module 'oe.utils' has no
>> attribute 'parallel_make_argument'
>>
>>
>> DO help,
>>
>> is there any other way to establish Internet connection inside poky?
>>
>> Thanks
>>
>>
>> --
>> ___
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/openembedded-core
>>
>>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [meta-openembeded] bug in adding network layer

2018-03-21 Thread Rajath C S

I am tryiing to add meta-networking layer (to get Internet connection to
poky)and i have included the following line of code in bbconfig file
/home/jarvis/poky/meta-openembedded/meta-networking \

but while building i get this below error


ERROR: ExpansionError during parsing
/home/jarvis/poky/meta-openembedded/meta-networking/recipes-support/libtdb/
libtdb_1.3.15.bb
Traceback (most recent call last):
bb.data_smart.ExpansionError: Failure expanding variable do_compile,
expression was python ./buildtools/bin/waf
${@oe.utils.parallel_make_argument(d, '-j%d', limit=64)}
 which triggered exception AttributeError: module 'oe.utils' has no
attribute 'parallel_make_argument'


DO help,

is there any other way to establish Internet connection inside poky?

Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [oe-core] package inclusion error

2018-03-21 Thread Rajath C S

opencv recipe is in meta-oe layer, i have included meta-oe path in
bblayer.config file
and i have also included open cv in IMAGE_INSTALL and have successfully
built the target using bitbake but still when i am doing 'import cv2' on
python terminal on yocto's poky it says 'no moudle named cv2'. what is the
solution?
Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Re: [OE-core] [oe-core] Packages build via recipe

2018-03-20 Thread Rajath C S

There are no recipes related to keras and tensorflow and there is nothing
ok web. As you told the only option is to write one.

On Tue, 20 Mar 2018, 22:12 Khem Raj, <raj.k...@gmail.com> wrote:

> On Tue, Mar 20, 2018 at 5:05 AM, Rajath C S <rajathcs.1...@gmail.com>
> wrote:
> > I have been trying to build keras and tensor flow packages on yocto's
> image
> > that is poky but not able to do so since there are no recipes for them.
> >
> >
> > What's the way to add keras and tensor flow packages to poky?
> >
>
> you can look into layers.openembedded.org and see if they are there.
> if not try to find it on web. otherwise write one
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [oe-core] Packages build via recipe

2018-03-20 Thread Rajath C S

I have been trying to build keras and tensor flow packages on yocto's image
that is poky but not able to do so since there are no recipes for them.


What's the way to add keras and tensor flow packages to poky?

Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] [oe-core] system lock down in middle of build

2018-03-19 Thread Rajath C S

Hi,

so i am workin gon yocto development on my PC as well as on my laptop.
I have also worked on it on others systems, but the strange thing is only
on my PC & laptop the systems gets logged out automatically in the midst of
target build.
Is this a bug?

PS: both my PC & laptop are of high-end configurations

Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] Build Error

2018-03-19 Thread Rajath C S

Hi,

1. So while building the target i get the following error,

bitbake core-image-sato
Loading cache: 100%
|#|
Time: 0:00:00
Loaded 1 entries from dependency cache.
ERROR: ParseError at
/home/jarvis/poky/meta-openembedded/meta-python/recipes-extended/python-pyephem/
python-pyephem_3.7.6.0.bb:12: Could not inherit file classes/pypi.bbclass

for which i create a file called pypi.bbclass and copy the code in it and
place it it /poky/meta/classes and run
"bitbake core-image-sato" for which i dont get any error,
is it the right method to be followed?

2. This error appears when i am using bitbake in rocko branch but doesnt
appear when i shift to master branch and build the image; is it fine to
shift branch (i.e. from rocko to master) and build the image?

Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] Branch shifting [image-build]

2018-03-19 Thread Rajath C S

What is the reason that we shift to a branch called rocko while installing
poky?
 The reason I ask this is , I was getting an error named classes/.pypi
inherit not found.. So I shifted the branch to master and ran bitbake and
it doesn't show any errors.
Will I have any problems later or is shifting branch fine?
Thanks
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] Building keras and tensor flow on yocto

2018-03-19 Thread Rajath C S

I have been trying to build keras and tensor flow packages on yocto's image
that is poky but not able to do so.

Until now I have tried looking for their respective recipe but couldn't
find.
What's the way to add keras and tensor flow packages to poky?
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] Unsubscribe from getting mails of others

2018-03-18 Thread Rajath C S

I'd request you to please cancel out the mails that i am receiving of
others threads
That i dont like each and every question to be popped to my mail
Rajath C S,
9964182112,
Bangalore - 560060
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

45 matches

Mail list logo