Hi Folks,
I'm not having much luck and if someone can help with solid suggestions
before I start poking around, it could save me stuffing up the machine.
Firstly, I think that the graphics is having a problem with my TV, so if
someone can tell me how to stop the system from wanting to boot
I've bitten the bullet and have started an upgrade process.
The troubled graphics card has been removed and I'm currently using the
on-board graphics which, as OI starts, is fine up until launching GNOME
and then no display, but I can ssh in to the box.
My efforts on Google are so far coming
I'm getting somewhere, but I might have a RAM corruption issue.
In the mean time, trying to replace a 2tb drive with a 3tb drive in a
three drive RaidZ, gives ...
cannot replace c2t5d0 with c2t2d0: devices have different sector alignment
How do I get around this please? I want to remain
OK - so far...
System RAM passes Memtest86 v4.20
That leaves me with two problems...
1) Disable Gnome from starting, or remove it completely.
2) How to get around the sector alignment problem.
I have a very ugly feeling that the only way is going to be to destroy
the set and start again, as
On 10/06/12 09:37 PM, michelle wrote:
OK - so far...
System RAM passes Memtest86 v4.20
That leaves me with two problems...
1) Disable Gnome from starting, or remove it completely.
svcadm disable gnome
is a good place to start.
2) How to get around the sector alignment problem.
I can't
2012-06-10 14:31, michelle wrote:
That leaves me with two problems...
1) Disable Gnome from starting, or remove it completely.
As for GNOME, try svcadm disable gdm. I'd think there may be some
video driver problems, but just about any card should work as a VESA
or SVGA driver. Still, I also
Hi Jim,
Thanks for the gdm, I just couldn't work out what the service name was.
I've disabled that.
I did try yanking the drive, with kindness, of course, but still got the
same error message; zfs is obviously smarter than me
At the moment, I'm backing up the drives so I had to revert the
2012-06-10 16:30, michelle wrote:
To test the 3tb drive in a Linux system, before I trusted it to the
server, I did create a partition on it; however my understanding is that
when I give a zfs command at device level ... zpool replace data c2t3d0
c2t5d0 ... it shouldn't matter what partitions
BTW, can you give some more detail on the machine and its HDD
controllers? There were recently discussions on zfs-discuss
list about Dell-branded HBAs with Dell firmware bent on power
saving, which sent the WD disks in particular to slep mode
right away instead of having them work. There were
Thanks for the info Jim,
The motherboard is a Gigabyte GA-H55M-UD2H and has five SATA sockets,
two IDE and one E-sata.
The SATA are, I believe, Intel.
I think I've got an i5 in it, with 4gig of RAM. I don't use compression
or encryption.
There are two Intel SSDs in a ZFS mirror and I
The system seems to have hung again, any query to the ZFS system hangs
the session.
Nothing in /var/adm/messages.
I'm wondering whether the combination of having a mirrored zfs set with
one drive on e-sata and one drive on USB could be upsetting it.
On 10/06/12 14:53, michelle wrote:
2012-06-10 18:45, michelle wrote:
The system seems to have hung again, any query to the ZFS system hangs
the session.
Nothing in /var/adm/messages.
I'm wondering whether the combination of having a mirrored zfs set with
one drive on e-sata and one drive on USB could be upsetting it.
The
On Jun 10, 2012, at 7:45 AM, michelle wrote:
The system seems to have hung again, any query to the ZFS system hangs the
session.
Nothing in /var/adm/messages.
Try fmdump -eV
-- richard
I'm wondering whether the combination of having a mirrored zfs set with one
drive on e-sata and
On 06/10/12 04:37, michelle wrote:
2) How to get around the sector alignment problem.
I have a very ugly feeling that the only way is going to be to destroy
the set and start again, as everything I've tried so far hasn't worked.
That was my conclusion as well - I wound up using zfs send | zfs
Hello,
oi-151a4 (=prestable3, and probably a3 also) disconnect the USB /
mouse when power management is on (and screensaver goes to standby
or suspend). This shouldn't happen, as the mouse can only be
reactivated by replugging (and only if the hotplug daemon runs).
I can circumvent this problem
Hello,
I've tried Googling but haven't had any luck thus far--I'm attempting
to install a zone on my oi_151-a4 system but it looks to be hanging
for some reason. fwiw the system was initially installed using oi_147
media, upgraded to oi_148 and then recently upgraded to oi_151-a4.
The output to
16 matches
Mail list logo
