[OpenIndiana-discuss] zpool completes resilver with no errors and then starts resilvering again - resolved
Hi After over a week of continous resilvering without any errors being reported it has finally stopped. Unfortunately I am not sure precisely why it has stopped, it could be down to one of two actions. In order to increase the rate at which resilvering took place so that unnecessary processes were not run, I had my desktop running at run-level 2 as this reduced the resilver time by around 5 hours but after completing it immediately started again. So yesterday I allowed the resilver to take place while the desktop was active (run-level 3) and the resilver time completed in 15 hours and did not start to resilver again this time. There is no requirement to complete the resilver in run-level 3? Unfortunately I also completed a pkg update to a new BE so I am not sure which or if both actions resolved this resilver issue. Regards Russell ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
[OpenIndiana-discuss] zpool completes resilver with no errors and then starts resilvering again
Hi, I have six disk raidz2, originally all disks were 3TB, swapped one 3TB for a 6TB, waited for the resilver to complete but then it immediately starts the next. # zpool status uhome pool: uhome state: ONLINE status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Tue Apr 14 17:11:49 2020 3.51T scanned at 3.32G/s, 1.03G issued at 2.14M/s, 13.9T total 0 resilvered, 0.01% done, no estimated completion time config: NAME STATE READ WRITE CKSUM uhome ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 c7t8d1p0 ONLINE 0 0 0 c7t9d1p0 ONLINE 0 0 0 c7t10d1p0 ONLINE 0 0 0 c7t11d1p0 ONLINE 0 0 0 (awaiting resilver) c7t12d1p0 ONLINE 0 0 0 c7t13d1p0 ONLINE 0 0 0 errors: No known data errors I left the computer on all day and it took around 10 hours to complete a resilver then it started again. No errors are being produced, any suggestions how to resolve this? Russell ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss