Re: Syncrepl only partially working

2016-10-31 Thread Quanah Gibson-Mount
--On Sunday, October 30, 2016 11:16 AM +0100 Dieter Klünter wrote: It is a bit more complicated than that. syncrepl is a client operation, which requires ldap client configuration, specified in ldap.conf(5). You can set these specifically for the syncrepl client as a

Re: Syncrepl only partially working

2016-10-30 Thread Dieter Klünter
Am Sat, 29 Oct 2016 13:16:03 -0600 schrieb Joshua Schaeffer : > > > On 10/29/2016 03:45 AM, Dieter Klünter wrote: > > > > Note that there is a hard coded limit to 500 operations. If you have > > more than 500 entries, syncrepl only recieves a limited set of > >

Re: Syncrepl only partially working

2016-10-29 Thread Joshua Schaeffer
On 10/28/2016 11:22 PM, Ryan Tandy wrote: On Fri, Oct 28, 2016 at 09:50:30PM -0600, Joshua Schaeffer wrote: dn: olcDatabase={1}mdb,cn=config changetype: modify replace: olcSuffix olcSuffix: dc=harmonywave,dc=com - replace: olcRootDN olcRootDN: cn=admin,dc=harmonywave,dc=com You may have

Re: Syncrepl only partially working

2016-10-29 Thread Joshua Schaeffer
On 10/29/2016 03:45 AM, Dieter Klünter wrote: Note that there is a hard coded limit to 500 operations. If you have more than 500 entries, syncrepl only recieves a limited set of entries. Read slapd-config(5) on limits. -Dieter I feel this is somewhat contradictory with the admin guide:

Re: Syncrepl only partially working

2016-10-29 Thread Dieter Klünter
Am Fri, 28 Oct 2016 21:50:30 -0600 schrieb Joshua Schaeffer : > Greetings all, > > I'm trying to figure out why Syncrepl is only syncing part of my > provider's database when I use GSSAPI to connect. Both my provider > and consumer are on 2.4.40. Here are all the steps

Re: Syncrepl only partially working

2016-10-28 Thread Ryan Tandy
On Fri, Oct 28, 2016 at 09:50:30PM -0600, Joshua Schaeffer wrote: dn: olcDatabase={1}mdb,cn=config changetype: modify replace: olcSuffix olcSuffix: dc=harmonywave,dc=com - replace: olcRootDN olcRootDN: cn=admin,dc=harmonywave,dc=com You may have done this - I didn't see it - but if you change

Syncrepl only partially working

2016-10-28 Thread Joshua Schaeffer
Greetings all, I'm trying to figure out why Syncrepl is only syncing part of my provider's database when I use GSSAPI to connect. Both my provider and consumer are on 2.4.40. Here are all the steps I'm taking: My provider is working fine, I've been using it for months now without any issues.