On 09/26/2014 10:03 PM, Kent Brinkley wrote:
Hi all,
I am trying to get Bus Blaster V3 probe working with CI20
(http://www.elinux.org/MIPS_Creator_CI20 ) working with openocd but
I'm having not luck. Upon starting openocd, I see the jtag idcode
message and see continuous reset messages because rocc (bit 31) cannot
be cleared. This would be true if core 1 is ....
Sorry, I don't have this hardware, I can't do any test. But seems you
are starting at
15000Khz, I would start at much lower scan rate to discard any problem
related to
timings. Perhaps the rocc bit is ok but the probe reads it wrong.
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel