On Thu, Jul 30, 2009 at 10:23 PM, Xiaofan Chenxiaof...@gmail.com wrote:
I have to change the following line in the target config file from the
following website.
http://www.kunen.org/node/105
What is the correct configuration about this LM3S1968?
I am also having problem with J-Link with the
On Fri, Jul 31, 2009 at 7:41 PM, Xiaofan Chenxiaof...@gmail.com wrote:
On Thu, Jul 30, 2009 at 10:23 PM, Xiaofan Chenxiaof...@gmail.com wrote:
I am also having problem with J-Link with the EK-LM3S1968. It
is not able to flash the flash. I've tried V3 and V6 IAR OEM version of
J-Link. Take note
Hi,
I've seen that in the past months a preliminary support for AVR chips
was added.
What's the current status of the port?
Is Simon Quian (the main developer of the port, as far as I can tell)
still around?
Is anybody trying it out with jtagICE mkII programmer?
Best regards,
--
Ing. Luca
On Fri, Jul 31, 2009 at 8:24 PM, Xiaofan Chenxiaof...@gmail.com wrote:
V0.2.0 release works with the on-board ftdi interface. But it still has the
same problem with J-Link. Firstly I have to reduce jtag_khz to around
1000. Secondly it still does not work with flashing.
On Fri, Jul 31, 2009 at 7:56 PM, Xiaofan Chenxiaof...@gmail.com wrote:
On Fri, Jul 31, 2009 at 7:41 PM, Xiaofan Chenxiaof...@gmail.com wrote:
On Thu, Jul 30, 2009 at 10:23 PM, Xiaofan Chenxiaof...@gmail.com wrote:
I am also having problem with J-Link with the EK-LM3S1968. It
is not able to
On Fri, Jul 31, 2009 at 7:56 PM, Xiaofan Chenxiaof...@gmail.com wrote:
Not really. It seems that some Ubuntu 9.04 updates yesterday messed up with
OpenOCD now. Actually it crashed now with ftdi interface.
The same result for Arch Linux with the latest svn version V2571.
Again release version
It's been pretty quiet after 0.2
I'm out of the office until August 14.
--
Øyvind Harboe
Embedded software and hardware consulting services
http://www.zylin.com
___
Openocd-development mailing list
Openocd-development@lists.berlios.de
It's an experimental code. I tested it on my Versaloon.
OpenOCD doesn't support JTAGICE mkII, if you want to use JTAGICE mkII, try
avrdude.
2009/7/31 Luca Ottaviano lottavi...@develer.com
Hi,
I've seen that in the past months a preliminary support for AVR chips
was added.
What's the current
The flash bank command in the LPC2103 configuration file(target/lpc2103.cfg)
looks like the follwing:
# 32kB of internal Flash, core clocked with 12MHz crystal
# flash bank lpc2000 base size 0 0 target# variant clock
[calc_checksum]
flash bank lpc2000 0x0 0x8000 0 0 0 lpc2000_v2 12000