Hi Rangababu,
On Sat, Jul 23, 2011 at 12:58 PM, Rangababu Chakravarthula
rb...@hexagrid.com wrote:
Couple of questions
a) How can we address the max 4096 vlan's problem if each user want's a
VLAN tagged network?
Currently, the notion of a VLAN is pretty central to the nova networking
code.
On Mon, Jul 25, 2011 at 3:08 PM, Rangababu Chakravarthula
rb...@hexagrid.com wrote:
Thank you Dan. Response below.
On Mon, Jul 25, 2011 at 11:36 AM, Dan Wendlandt d...@nicira.com wrote:
Hi Rangababu,
On Sat, Jul 23, 2011 at 12:58 PM, Rangababu Chakravarthula
rb...@hexagrid.com wrote:
My switch is H3C S1526, how to setup it in trunk mode?
From: vishvana...@gmail.com
Date: Thu, 21 Jul 2011 09:29:25 -0700
To: narayan.de...@gmail.com
CC: openstack@lists.launchpad.net
Subject: Re: [Openstack] about vlan and switch
+1
Yes you usually have to set up trunk mode for all
Couple of questions
a) How can we address the max 4096 vlan's problem if each user want's a VLAN
tagged network?
b) Docs says for each VLAN network, a dhcp server is started. How does it
work when we do livemigrate?
thanks
On Wed, Jul 20, 2011 at 11:56 PM, Thor Wolpert t...@wolpert.ca wrote:
We had to preconfigure the vlan tags and set all network ports for
nova-compute nodes to trunk them in advance on our switching gear.
(BNT and Juniper both, but I've also needed to do it on Cisco gear) I
think that is a pretty common requirement for managed switches.
-nld
+1
Yes you usually have to set up trunk mode for all the vlans you are planning on
using on all ports for the compute and network hosts
FYI nova starts with vlan 100 and goes up.
Vish
On Jul 21, 2011, at 4:53 AM, Narayan Desai wrote:
We had to preconfigure the vlan tags and set all network
Hi, all
If use VLAN mode, it's need setting VLAN in switch's NOS first?
And then the setting VLAN in nova controller node?
Now, the switch's IP is 192.168.0.234 and the gateway ip address is
192.168.0.1 ( in switch web management interface), should I change the
switch IP and gateway to
7 matches
Mail list logo