Dear all,
the HDD on my OpenStack controller has failed and I would like to know
what is the best way to recover some basic controller functions assuming
that I can get some of the data from it.
Let me give you some information about the installation's background
and what I would like to do
n/question/84506/how-to-convert-qcow3-image-to-qcow2/
Or convert it to raw. Main inconvenience is the increased size.
Or create a volume from the image, and on the destination system,
boot from the volume and snapshot the instance to create an image
again.
-Original Message-----
From: Georgios Di
Dear all,
I am trying to build a Windows image on a rather new Ubuntu system
which image would be imported and used on an old OpenStack Icehouse
installation.
The system on which I am building it has the following characteristics:
Distributor ID: Ubuntu
Description:Ubuntu 16.04.3 LTS
Dear all,
I have a small Ocata installation (1x controller + 2x compute nodes) on
which I have manually created 5 network ports and afterwards each one of
these ports is assigned to a specific instance (4Linux VMs and
1Windows). All these instances are located on one physical hypervisor
Can anyone shed some light?
Is this possible or not?
Best,
G.
Hello!
I have an Openstack Ocata installation and I would like to set SSL
for EC2-API.
Can someone point me to the right direction in setting it?
Best regards,
G.
___
Mailing
Hello!
I have an Openstack Ocata installation and I would like to set SSL for
EC2-API.
Can someone point me to the right direction in setting it?
Best regards,
G.
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
e
--active doesnt actually do anything to the instance, it just
manipulates the nova db. The reboot --hard does a fairly clean
"reboot" of the instance even if it is off. None of this should
really
have anything to do with CEPH as per se, so not sure it will have
the
desired outcome on yo
esnt actually do anything to the instance, it just
manipulates the nova db. The reboot --hard does a fairly clean
"reboot" of the instance even if it is off. None of this should
really
have anything to do with CEPH as per se, so not sure it will have
the
desired outcome on your cloud t
this should
really
have anything to do with CEPH as per se, so not sure it will have the
desired outcome on your cloud though.
On Sun, Oct 8, 2017 at 8:46 AM, Georgios Dimitrakakis wrote:
Hello,
I ve tried today to update my OpenStack installation to the latest
Ocata version.
What I did was to
Hello,
I 've tried today to update my OpenStack installation to the latest
Ocata version.
What I did was to shutoff all running instances, perform all updates
and then rebooted controller and compute nodes.
All seemed to have finished successfully but unfortunately when I tried
to power
Hi,
according to this document : https://releases.openstack.org/ocata/
Nova latest version is 15.0.6 but at CentOS repo
(http://mirror.centos.org/centos/7/cloud/x86_64/openstack-ocata/) the
latest available version is 15.0.4
Does anyone know how long does it take to be updated?
Best,
G.
Hello Manuel,
I was in your shoes some time ago with normal VMs (not ironic) but I
guess the same logic applies.
What worked for me is:
nova-manage project quota_usage_refresh --project --user
Essentially the difference is that I have used the ID instead of the
name and I have also
you try to list it. How many networks/subnets/ports.
Regards,
Andrey.
On Thu, Apr 20, 2017 at 11:50 PM, Georgios Dimitrakakis wrote:
Hello,
I will try to provide you with the logs in the next few days...
Best,
G.
Hello Georgios,
We will test it on our site, but for more careful
I was wondering if there are any documents or other information
available out there regarding ISO certification standards and OpenStack.
I understand that ISO27017 and/or ISO27018 refer to Cloud Computing and
that they are based on ISO27001/2. So in terms of OpenStack are there
any checklists
the unassigned ones client-side.
Best regards,
Alex Levine
On 4/20/17 11:48 PM, Georgios Dimitrakakis wrote:
Hello,
I am on Ocata and trying to use EC2-API to assign floating IP
addresses to a VM.
It seems though that the EC2-API doesn't provide a list of the
unassigned (aka free) IP
Hello,
I am on Ocata and trying to use EC2-API to assign floating IP addresses
to a VM.
It seems though that the EC2-API doesn't provide a list of the
unassigned (aka free) IP addresses but it produces a list of all the
floating IPs no matter if these have already been assigned to another
can provide is welcome.
Thank you,
BR,
Anastasia
On 18 Apr 2017, at 10:22, Georgios Dimitrakakis wrote:
Hello Anastasia!
Yes, 'nova list' is fast and I 've already given the requested
information by replying to Jay's post.
Jay asked someone from the the EC2 API team to look at it but so far
Georgios,
We'll definitely update the doc. We were away all of us so
couldn't
help you with your initial problems. Glad you'd figured them out.
Sorry about your troubles.
Best regards,
Alex Levine
On 4/1/17 12:00 PM, Georgios Dimitrakakis wrote:
For people dealing with the same problem I
,
Alex Levine
On 4/1/17 12:00 PM, Georgios Dimitrakakis wrote:
For people dealing with the same problem I was able to overcome the
problem by installing the "openstack-ec2-api" package from the
centos-openstack-ocata repository.
Although the binaries were exactly the same as
st regards,
G.
On 03/26/2017 04:06 PM, Georgios Dimitrakakis wrote:
Hello,
can someone let me know if it's an expected behavior the EC2API to
be
very slow in Ocata?
I have an old installation of OpenStack (Icehouse) with NOVA-EC2 and
when requesting an instance's info I am getting them ba
ackage in your distro provides the
'conntrack' util.
On Apr 7, 2017 03:52, "Georgios Dimitrakakis" wrote:
Hello,
I am having an Ocata installation and on my Compute Node the
"linuxbridge-agent.log" file is constantly filling out with
messages like this:
2017-04-07 13:37:47.70
All right!
Thank you all for the feedback!
Best,
G.
Hi Georgios,
Yes you can. You would need to create a new port in neutron using the
--fixed-ip flag to assign the IP you want. Then attach the port to
you
instances and DHCP will hand it that IP.
___
John Petrini
o provides the
'conntrack' util.
On Apr 7, 2017 03:52, "Georgios Dimitrakakis" wrote:
Hello,
I am having an Ocata installation and on my Compute Node the
"linuxbridge-agent.log" file is constantly filling out with
messages like this:
2017-04-07 13:37:47.709 1397 ERROR neutron
Hello,
I am having an Ocata installation and on my Compute Node the
"linuxbridge-agent.log" file is constantly filling out with messages
like this:
2017-04-07 13:37:47.709 1397 ERROR
neutron.plugins.ml2.drivers.agent._common_agent Traceback (most recent
call last):
2017-04-07 13:37:47.709
If you are in Ocata the following bug is the problem:
https://bugs.launchpad.net/nova/+bug/1670627
You can manually refresh them using the command:
nova-manage project quota_usage_refresh --project $PROJECT_ID --user
$USER_ID
Best regards,
G.
The Overview page of the dashboard shows
Hi!
I understand that OpenStack allocates selfservice IP addresses to VMs
from a DHCP server.
Is there a way to instruct this DHCP server to always allocate the same
internal (selfservice network) IP address
to a specific VM based on its MAC address for example?
Regards,
G.
ecifications
and requirements.
Regards,
G.
On Mon, 20 Mar 2017 00:27:35 +0200, Georgios Dimitrakakis wrote:
Just to post an update.
These are two different issues.
The first one
# aws --endpoint-url http://controller:8788 ec2 describe-images
An error occurred (AuthFailure) when callin
don't files as
/etc/sysconfig/iptables.
Apart from the listed below DROP/REJECT rules there are no more of
such rules.
Regards,
Manjunath
-Original Message-
From: Georgios Dimitrakakis [mailto:gior...@acmac.uoc.gr]
Sent: Monday, 20 March, 2017 6:32 PM
To: openstack@lists.openstack.org
contact them and waiting to see why all "nslookup" are getting
a "REFUSED" from their server.
Thanks for your time.
G.
Hi,
Do you see dns address in /etc/resolv.conf?
Regards,
Manjunath
On 27 Mar 2017, at 19:45, Georgios Dimitrakakis
<gior...@acmac.uoc.gr> wrote:
Hi!
I have an OpenStack Ocata installation where I have one "selfservice"
network and one "provider" network (with 1 external subnet).
This configuration was set using the default installation guide and is
working fine.
Now I 've bought a second external subnet from my provider and I 've
Hello,
can someone let me know if it's an expected behavior the EC2API to be
very slow in Ocata?
I have an old installation of OpenStack (Icehouse) with NOVA-EC2 and
when requesting an instance's info I am getting them back in 9sec.
In a newer Ocata installation with EC2API it takes around
rectly from
there the file that was corresponding to the image I wanted.
Do you believe that by "saving" it would make any difference??
Any other ideas that I can try???
All the best,
G.
On Sun, 26 Mar 2017 05:37:47 +0300, Georgios Dimitrakakis wrote:
Hi Chris!
Thanks for pointing out th
stack show image ' / 'openstack image set ??
'
You can definitely download the image to a file and then upload a new
image, specifying --min-disk. Something like 'openstack image save
--file ' and then just 'openstack image create --file
--min-disk '
HTH,
-Chris
On Mar 25, 2017, at 5:31 PM
Hello!
Let's assume that I have a VM's image that has been taken when the VM
was launched with a flavor of 50GB for the root disk.
Now when I try to spawn a new VM out of that image I cannot do it with
a flavor that has disk less than 50GB even if the VM itself inside uses
only 5GB.
Is
reference says that the panel has
been split into two
new panels which I guess are the “API Access” and “Key Pairs” panels
you see, no?
Cheers,
Arne
On 20 Mar 2017, at 20:48, Georgios Dimitrakakis
<gior...@acmac.uoc.gr> wrote:
Hi Arne,
unfortunately mine Ocata version does not have th
Wiebalck wrote:
Georgios,
This should be on the left hand side panel: Click on Project —>
Compute —> Access & Security.
I attach a screenshot how it looks here.
HTH,
Arne
On 20 Mar 2017, at 20:13, Georgios Dimitrakakis wrote:
In my OpenStack Ocata installation I am trying to
In my OpenStack Ocata installation I am trying to find where the
"Access and Security" tab is.
According to this:
https://docs.openstack.org/releasenotes/horizon/ocata.html
there should be a new panel but I am unable to see it!!!
Any help will be very much appreciated!
Regards,
G.
prot opt source destination
nova-compute-local all -- anywhere anywhere
Regards,
Manjunath
-Original Message-
From: Georgios Dimitrakakis [mailto:gior...@acmac.uoc.gr]
Sent: Sunday, 19 March, 2017 11:35 PM
To: openstack@lists.openstack.org
Subject: Re: [Openstack] DHCP Request F
Just to post an update.
These are two different issues.
The first one
# aws --endpoint-url http://controller:8788 ec2 describe-images
An error occurred (AuthFailure) when calling the DescribeImages
operation: Not Found
was because of this line
keystone_ec2_tokens_url =
us so we uninstall and disable it on all
compute nodes.
yum -y remove firewalld
Sent from my iPhone
On Mar 13, 2017, at 5:58 PM, Georgios Dimitrakakis
<gior...@acmac.uoc.gr> wrote:
My problem may be due to the "firewalld" service running
Has anyone configured OpenStac
Furthermore,
now all my instances FAIL to get their metadata!
This is the error in "ec2-metadata-api.log"
2017-03-19 17:04:16.689 13635 WARNING ec2api.metadata [-]
X-Instance-ID-Signature:
b80302f1bd7d744c40cabc35908d8f70f49093d5cd07763cdd769d90b925db62 does
not match the expected value:
Hello,
I desperately need your help in order to set up EC2-API in Ocata.
I have installed and started the services but I am not sure how to
configure the endpoints since the manual is refering to ports as
and to version as Y.
I have guessed that these are =8788 and Y=2 but without
Performing a "yum update" I am seeing this message:
Error: Package: python-zmq-14.7.0-2.el7.x86_64
(@centos-openstack-ocata)
Requires: libzmq.so.4()(64bit)
Removing: zeromq-4.0.5-4.el7.x86_64
(@centos-openstack-ocata)
libzmq.so.4()(64bit)
wrote:
It causes problems for us so we uninstall and disable it on all
compute nodes.
yum -y remove firewalld
Sent from my iPhone
On Mar 13, 2017, at 5:58 PM, Georgios Dimitrakakis
<gior...@acmac.uoc.gr> wrote:
My problem may be due to the "firewalld" service running
Trying to deploy a new instance in Self-Service network while I have
already deployed two others (one in provider and one in Self-Service) in
Ocata I see in dashboard the error "Cannot retrieve instances list"
At the same time from CLI I am getting this:
# nova list
My problem may be due to the "firewalld" service running
Has anyone configured OpenStack on CentOS with Firewalld or do you
suggest to disable it?
Best,
G.
On Sat, 11 Mar 2017 21:28:51 +0200, Georgios Dimitrakakis wrote:
Hello!
I am trying to setup a new Ocata installation
Hello!
I am trying to setup a new Ocata installation following the official
guide but my instances fail to get a DHCP address.
I am using two physical nodes (1x controller and 1x compute) each one
with two network interfaces.
Compute node can reach the Controller node via the first interface
Hi,
check out this bug:
https://bugs.launchpad.net/openstack-manuals/+bug/1663485
It's a problem that I also had (the one with the "placement" section)
and if you carefully follow the steps in the bug you should be able to
overcome it.
Regards,
George
I think youd better file a bug in
Hi all!
I am setting up an Ocata installation from scratch and my problem is
when some instances come up in ERROR state (for various reasons).
Since they are not usable when they are deleted they still continue to
consume resources (VCPUs, Number of Instances, RAM etc). This obviously
est,
Belmiro
On Tue, Mar 7, 2017 at 7:37 AM, Georgios Dimitrakakis wrote:
Hello,
I ve rebooted everything several times before posting here without
success...
Any other ideas?
Best,
G.
You can try to reboot the node and see if it works. Some resources
might be locked at libvirt and kvm.
发自我的
Hello,
I 've rebooted everything several times before posting here without
success...
Any other ideas?
Best,
G.
You can try to reboot the node and see if it works. Some resources
might be locked at libvirt and kvm.
发自我的 iPhone
在 2017年3月7日，上午6:18，Georgios Dimitrakakis <g
All,
I am setting up a new Ocata installation and although no instances are
running or at least not shown neither in Dashboard nor in CLI using the
"nova list" command I am getting a "Quota Exceeded" error.
Why is this happening and how can I clean it up in order to continue
using it?
The
ption.
I am mailing you directly because for some reason i am unable to
send
to thr mailing list.
When you reply to the mailing list olease put this mail in it so
others can see it too if they have the same problem.
Thanks,
Mihai
On 2 Mar 2017 20:00, "Georgios Dimitrakakis" wrote:
.
The only req is that you need to have all computes up when creating
the cell.
On 2 Mar 2017 23:46, "Georgios Dimitrakakis" wrote:
Thanks for the feedback, but I am assuming that this by itself is
not enough.
I guess I should have created the DB before.
Any other actions that mu
for some reason i am unable to send
to thr mailing list.
When you reply to the mailing list olease put this mail in it so
others can see it too if they have the same problem.
Thanks,
Mihai
On 2 Mar 2017 20:00, "Georgios Dimitrakakis" wrote:
It seems that I wont be able to spawn an
Dimitri,
have you checked for all the "usual suspects" (firewall, networking,
ssh up etc.)?
Best,
George
On Thu, 2 Mar 2017 12:00:54 -0800, Dimitris Theoharis wrote:
Hello
i am trying to deploy newton via the ansible role to 6 nodes. The
setup-hosts.yml after a while starts giving these
looking for a permanent solution...
Best,
G.
On Thu, 02 Mar 2017 10:56:19 +0200, Georgios Dimitrakakis wrote:
Mihai, I am putting the list here as well...
No I didn't add the [placement] section in nova.conf on the
controller but adding it only on the compute node brought it online.
I don't know
cell_v2 with nova-manage
or else you wont be able to spawn instances.
But first add the placement section on the controller too in
nova.conf
and the computes shoukd come online.
On 2 Mar 2017 09:27, "Georgios Dimitrakakis" wrote:
On 03/01/2017 05:13 PM, Georgios Dimitrakakis wrote:
On 03/01/2017 05:13 PM, Georgios Dimitrakakis wrote:
All,
I am trying to deploy OpenStack Ocata on bare metal servers using
the official
guide from here:
https://docs.openstack.org/ocata/install-guide-rdo/nova-compute-install.html
Unfortunately I have stuck at deploying the Compute Node due
All,
I am trying to deploy OpenStack Ocata on bare metal servers using the
official guide from here:
https://docs.openstack.org/ocata/install-guide-rdo/nova-compute-install.html
Unfortunately I have stuck at deploying the Compute Node due to the
following error in the logs when I try to
I did a reboot on the physical host and the image is now spawned...
Any ideas why this is happening??
G.
On Tue, 28 Feb 2017 23:52:55 +0200, Georgios Dimitrakakis wrote:
OK! I see...
Unfortunately I cannot spawn an image and the error in dashboard is :
Error: Failed to perform requested
ithout any further
impact.
Any ideas?
Best,
G.
On Tue, 28 Feb 2017 15:25:45 -0600, Chris Friesen wrote:
On 02/28/2017 02:39 PM, Georgios Dimitrakakis wrote:
Hello community,
I am deploying OpenStack using Kolla initially on an all-in-one
physical
dedicated server.
My server supports KVM s
Hello community,
I am deploying OpenStack using Kolla initially on an all-in-one
physical dedicated server.
My server supports KVM since I can get this for the CPUs:
[root]# egrep -c '(vmx|svm)' /proc/cpuinfo
16
[root]#
But when I login to dashboard I see that the hypervisor type is "QEMU"
Hi!
I am a new user of Fuel and would like to deploy it on a physical
SuperMicro machine. Unfortunately I wasn't able to install it via the
ISO file since I 've tried several times (with both the community and
the Mirantis edition) and every time there is a problem with the boot
loader which
Dear Hajar,
check that a firewall is not blocking communication, the service is up
and running and that "controller" is indeed the hostname on which it is
running.
Regards,
G.
On Thu, 21 Jul 2016 09:57:35 +, hajar Er wrote:
I did correct the endpoint but, i get the same issue
_--_
soon as it leaves the firewall
Instance.
Im not aware of a solution nice for IceHouse...
On 16 February 2016 at 06:26, Georgios Dimitrakakis wrote:
Mark and Martinx thank you both for your suggestions.
I had tried to build PFSense in the past but without success.
Indeed my goal is to run
ust a curiosity, why dont you use the Neutron native firewall that
resides on each L3 Router?
On 15 February 2016 at 15:56, Georgios Dimitrakakis wrote:
Hi!
Can anyone suggest me of a virtual firewall appliance which is
compatible with OpenStac
Hi!
Can anyone suggest me of a virtual firewall appliance which is
compatible with OpenStack?
Best regards,
G.
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe
All,
I was wondering if there is a way to change the EC2 Credentials for a
specific user in a tenant.
Could you please help me with that?
Regards,
G.
--
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to
I would also be interested to hear when Fuel can be installed on a
pre-provisioned CentOS machine.
Although I am closely folllowing Mirantis updates it would be great if
you could give us a note here on the list when that is possible.
Regards,
G.
Martin,
We are currently working on
All,
I am trying to integrate EC2-API (https://github.com/openstack/ec2-api)
with my OpenStack environment (Icehouse on CentOS).
So far I have built EC2-API on the virtual environment (using Python
2.7.9) and have started successfully the ec2-api, ec2-api-metadata an
ec2-api-s3 services.
Dear all,
I am wondering if it's possible to start a VM with a predefined mac
address (or a set of VMs from a pool of mac addresses). The reason I
want to do it is because I have a license server that permits software
running only if
the mac address is on the acceptance list.
If you have
--nic port-id
rather than --nic net-id.
James
On Oct 8, 2015, at 6:43 AM, Georgios Dimitrakakis
<gior...@acmac.uoc.gr> wrote:
Dear all,
I am wondering if it's possible to start a VM with a predefined mac
address (or a set of VMs from a pool of mac addresses). The reason I
want
I remember having a similar problem with an older CentOS image.
The steps I did to correct it were the following:
1) Updated to the latest version
yum update
2) Installed (if not installed) cloud-init, cloud-utils,
dracut-modules-growroot
yum install cloud-init cloud-utils
...right
On Mon, Sep 28, 2015 at 4:10 PM, Georgios Dimitrakakis wrote:
I remember having a similar problem with an older CentOS image.
The steps I did to correct it were the following:
1) Updated to the latest version
yum update
2) Installed (if not installed) cloud-init, cloud-utils,
dracut
Hi hjh,
you should provide more space on the partion where you /var/lib/nova
folder lives.
Depending on your installation you can either change the LVM partition
scheme of your hypervisor server and extend it
or add an extra disk and mount it there.
Regards,
George
On Thu, 24 Sep 2015
Dear all,
I am using OpenStack Icehouse version with nova (Legacy) networking and
I would like to have some control on the outgoing traffic of the VMs.
For the moment security groups offers this ability only for incoming
traffic (towards the VM). I would like to have that kind of control to
I was wondering if anyone has an idea of how queuing can be achieved in
Openstack.
Is everybody using there own custom made way or is there something more
universal?
If for example I want to spawn a new VM but there are aren't available
resources
then the spawn will fail with the no available
]
On 21/07/2015 1:41 am, Georgios Dimitrakakis wrote:
Hello!
I would like to know if its possible to define the order on which
the hypervisors are loaded.
I already have in my configuration
ram_weight_multiplier = -1.0
in order to pack as many VMs in one hypervisor as possible.
What I would
Hello!
I would like to know if it's possible to define the order on which the
hypervisors are loaded.
I already have in my configuration
ram_weight_multiplier = -1.0
in order to pack as many VMs in one hypervisor as possible.
What I would like to know now is if I can somehow define the
Hi all!
I would like to know if it's possible to pack as many VMs as possible
(based on the available resources) on one host
before populating another.
What I have seen so far is that by default it tries to balance the
available VMs on different hosts.
Looking forward for your answers!
free to email me if you have more questions.
Good luck.
Tzach
- Original Message -
From: Georgios Dimitrakakis gior...@acmac.uoc.gr
To: openstack@lists.openstack.org
Sent: Tuesday, May 12, 2015 12:05:20 PM
Subject: [Openstack] Windows VM running on OpenStack
Hi!
I was wondering
you live?
Tzach
- Original Message -
From: Georgios Dimitrakakis gior...@acmac.uoc.gr
To: Tzach Shefi tsh...@redhat.com
Cc: openstack@lists.openstack.org
Sent: Monday, May 18, 2015 1:15:05 PM
Subject: Re: [Openstack] Windows VM running on OpenStack
Hi Tzach,
thank you very much
Hi!
I was wondering if anyone has any experience and can help me built a
Windows Server VM that will be running on OpenStack. Any links or docs
are appreciated.
Additionally do you know what license should I get from Microsoft in
order to have that VM running on OpenStack?
Best regards,
Hi!
I am trying to find a way to import an OpenStack snapshot to Amazon as
AMI.
While browsing the web in order to find a way I came across this post:
http://lucasdipaola.blogspot.gr/2014/04/importing-openstack-image-into-amazon.html
I 've tried to followed the procedure described there
Have you checked your iptables rules?
Best,
George
Check this out.
root@os1:/var/log/keystone# curl http://os1:35357/
curl: (7) Failed to connect to os1 port 35357: Connection refused
root@os1:/var/log/keystone#
/var/log/keystone is empty...
A debug reveals:
root@os1:/var/log/keystone#
suggestion I am all ears.
Not having full access to the DataCenter and the underlying equipment
has caused me enough headaches so far :-(
Best,
George
On 03/14/2015 03:32 PM, Georgios Dimitrakakis wrote:
Hello again Rick!
On 03/13/2015 06:25 PM, Georgios Dimitrakakis wrote:
If I do
Hi Brent,
I would start by checking that the firewall is not blocking the
connections at the required ports.
Try by disabling firewall first and see if the services can be brought
up and then put the rules in
firewall for the ports:
80
6080
8773
3260
8776
5672
9292
3306
3260
5000
35357
I
Hello again Rick!
On 03/13/2015 06:25 PM, Georgios Dimitrakakis wrote:
If I do an :
arping -U -I etho x.x.x.x
where x.x.x.x is the IP address.
I can almost immediately access them outside of the subnet!
I had forgotten that, Still is that the very same set of options the
OpenStack code
I will try to see if I can get anything from the logs.
If someone else can come to a better suggestion I am all ears.
Not having full access to the DataCenter and the underlying equipment
has caused me enough headaches so far :-(
Best,
George
On 03/14/2015 03:32 PM, Georgios Dimitrakakis
On 03/13/2015 05:54 AM, Georgios Dimitrakakis wrote:
On 03/12/2015 06:24 PM, Georgios Dimitrakakis wrote:
Hello!
I am facing a rather weird issue and would like to know if anyone
has
faced it before and the way you have solved it (if any).
Firstly, I 'd like to let you know that I am
/3658e1015a2f7cb7c321cc1a0adfda37757fd80b/nova/network/linux_net.py#L764
[4]
On Fri, Mar 13, 2015 at 2:00 PM, Georgios Dimitrakakis wrote:
On 03/13/2015 05:54 AM, Georgios Dimitrakakis wrote:
On 03/12/2015 06:24 PM, Georgios Dimitrakakis wrote:
Hello!
I am facing a rather weird issue and would like
, Georgios Dimitrakakis wrote:
George,
how often does it send the gratuitous ARP requests?
Does it send it every time a network change is happening?
Best,
George
You have to set two variables in the nova.conf file apparently
(send_arp_for_ha and send_arp_for_ha_count):
https
is there anything I can do?
Regards,
George
On 03/13/2015 04:55 PM, Georgios Dimitrakakis wrote:
The value is 10
Do you believe that it should be bigger?
These accesses of instances which are being delayed by 20 minutes -
are they delayed for other instances in the subnet, or just for
accesses
The value is 10
Do you believe that it should be bigger?
Best,
George
Well, what value do you have for send_arp_for_ha_count ?
On 13 Mar 2015 17:11, Georgios Dimitrakakis wrote:
So according to that it sends ARP every time a floating IP is
assigned at a VM. Am I right?
If that is correct
On 03/12/2015 06:24 PM, Georgios Dimitrakakis wrote:
Hello!
I am facing a rather weird issue and would like to know if anyone
has
faced it before and the way you have solved it (if any).
Firstly, I 'd like to let you know that I am running Icehouse with
Nova-Legacy
Networking.
I have
Hello!
I was wondering if anyone has built a linux image that every time it
boots up is able to start with a different user account which can be
selected and defined on booting through some parameters.
The account info can be retrieved from an OpenLDAP or ActiveDirectory
service.
Regards,
Hello stackers!
I was wondering if it's possible to instruct nova not to give
every time the first available floating IP address but instead
select randomly from the available pool.
The problem that I am facing is that if I terminate a VM which has
for example the floating IP 1.1.1.100 and then
Hi all!
I would like to know what software are you using to design diagramms of
OpenStack installations. Ideally I would like to be able to sketch both
physical and virtual connections, nodes, storage arrays etc.
All the best,
George
___
Mailing
Hi all!
I have a basic environment with two nodes (one controller and one
compute).
My environment works well for the moment unless from the fact that I
cannot directly access the controller from any VM and vice versa.
My VMs are getting IPs from the 10.0.0.0/24 flat network which is
1 - 100 of 171 matches
Mail list logo
