Re: [openstack-dev] [tempest][qa][cinder] How to configure tempest with to test volume migration?
Yes, I put them in the cinder-spec. Best wishes, Vincent Hou (侯胜博) Staff Software Engineer, Open Standards and Open Source Team, Emerging Technology Institute, IBM China Software Development Lab Tel: 86-10-82450778 Fax: 86-10-82453660 Notes ID: Sheng Bo Hou/China/IBM@IBMCNE-mail: sb...@cn.ibm.com Address:3F Ring, Building 28 Zhongguancun Software Park, 8 Dongbeiwang West Road, Haidian District, Beijing, P.R.C.100193 地址:北京市海淀区东北旺西路8号中关村软件园28号楼环宇大厦3层 邮编：100193 Avishay Traeger avis...@stratoscale.com 05/26/2015 08:52 PM Please respond to OpenStack Development Mailing List \(not for usage questions\) openstack-dev@lists.openstack.org To OpenStack Development Mailing List (not for usage questions) openstack-dev@lists.openstack.org cc Subject Re: [openstack-dev] [tempest][qa][cinder] How to configure tempest with to test volume migration? Good to see that you will work on this! In addition to the cases that Duncan mentioned, there is also the case of moving a volume between two pools within the same backend. This probably complicates the setup even further. On Mon, May 25, 2015 at 12:31 PM, Duncan Thomas duncan.tho...@gmail.com wrote: There doesn't seem to be an existing tempest test for this. I suggest writing the test so that it looks if there are two volume types defined, and if so uses them. Ideally you should test migration to and from lvm. There is offline migration (volume is available) and online migration (volume is attached), which are two completely separate code paths. Great to hear somebody I'd writing tests for this! On 25 May 2015 10:24, Sheng Bo Hou sb...@cn.ibm.com wrote: Hi everyone, I am planning to add test cases for volume migration for cinder into tempest. I am wondering how to enable multiple back-ends for cinder in tempest, and connect to different back-ends. For example, I configure one back-end for LVM and the other is for IBM Storwize V7000 driver. Then run the test named like test_volume_migration_LVM_Storwize to test if the migration really works fine. About the configuration, is this something tempest can do so far? Or is this something new we need to add? Thank you very much. Best wishes, Vincent Hou (侯胜博) Staff Software Engineer, Open Standards and Open Source Team, Emerging Technology Institute, IBM China Software Development Lab Tel: 86-10-82450778 Fax: 86-10-82453660 Notes ID: Sheng Bo Hou/China/IBM@IBMCNE-mail: sb...@cn.ibm.com Address:3F Ring, Building 28 Zhongguancun Software Park, 8 Dongbeiwang West Road, Haidian District, Beijing, P.R.C.100193 地址:北京市海淀区东北旺西路8号中关村软件园28号楼环宇大厦3层 邮编：100193 __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev -- Avishay Traeger Storage RD Mobile: +972 54 447 1475 E-mail: avis...@stratoscale.com Web | Blog | Twitter | Google+ | Linkedin __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
Re: [openstack-dev] [tempest][qa][cinder] How to configure tempest with to test volume migration?
Good to see that you will work on this! In addition to the cases that Duncan mentioned, there is also the case of moving a volume between two pools within the same backend. This probably complicates the setup even further. On Mon, May 25, 2015 at 12:31 PM, Duncan Thomas duncan.tho...@gmail.com wrote: There doesn't seem to be an existing tempest test for this. I suggest writing the test so that it looks if there are two volume types defined, and if so uses them. Ideally you should test migration to and from lvm. There is offline migration (volume is available) and online migration (volume is attached), which are two completely separate code paths. Great to hear somebody I'd writing tests for this! On 25 May 2015 10:24, Sheng Bo Hou sb...@cn.ibm.com wrote: Hi everyone, I am planning to add test cases for volume migration for cinder into tempest. I am wondering how to enable multiple back-ends for cinder in tempest, and connect to different back-ends. For example, I configure one back-end for LVM and the other is for IBM Storwize V7000 driver. Then run the test named like test_volume_migration_LVM_Storwize to test if the migration really works fine. About the configuration, is this something tempest can do so far? Or is this something new we need to add? Thank you very much. Best wishes, Vincent Hou (侯胜博) Staff Software Engineer, Open Standards and Open Source Team, Emerging Technology Institute, IBM China Software Development Lab Tel: 86-10-82450778 Fax: 86-10-82453660 Notes ID: Sheng Bo Hou/China/IBM@IBMCNE-mail: sb...@cn.ibm.com Address:3F Ring, Building 28 Zhongguancun Software Park, 8 Dongbeiwang West Road, Haidian District, Beijing, P.R.C.100193 地址:北京市海淀区东北旺西路8号中关村软件园28号楼环宇大厦3层 邮编：100193 __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev -- *Avishay Traeger* *Storage RD* Mobile: +972 54 447 1475 E-mail: avis...@stratoscale.com Web http://www.stratoscale.com/ | Blog http://www.stratoscale.com/blog/ | Twitter https://twitter.com/Stratoscale | Google+ https://plus.google.com/u/1/b/108421603458396133912/108421603458396133912/posts | Linkedin https://www.linkedin.com/company/stratoscale __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
[openstack-dev] [tempest][qa][cinder] How to configure tempest with to test volume migration?
Hi everyone, I am planning to add test cases for volume migration for cinder into tempest. I am wondering how to enable multiple back-ends for cinder in tempest, and connect to different back-ends. For example, I configure one back-end for LVM and the other is for IBM Storwize V7000 driver. Then run the test named like test_volume_migration_LVM_Storwize to test if the migration really works fine. About the configuration, is this something tempest can do so far? Or is this something new we need to add? Thank you very much. Best wishes, Vincent Hou (侯胜博) Staff Software Engineer, Open Standards and Open Source Team, Emerging Technology Institute, IBM China Software Development Lab Tel: 86-10-82450778 Fax: 86-10-82453660 Notes ID: Sheng Bo Hou/China/IBM@IBMCNE-mail: sb...@cn.ibm.com Address:3F Ring, Building 28 Zhongguancun Software Park, 8 Dongbeiwang West Road, Haidian District, Beijing, P.R.C.100193 地址:北京市海淀区东北旺西路8号中关村软件园28号楼环宇大厦3层 邮编：100193 __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
Re: [openstack-dev] [tempest][qa][cinder] How to configure tempest with to test volume migration?
There doesn't seem to be an existing tempest test for this. I suggest writing the test so that it looks if there are two volume types defined, and if so uses them. Ideally you should test migration to and from lvm. There is offline migration (volume is available) and online migration (volume is attached), which are two completely separate code paths. Great to hear somebody I'd writing tests for this! On 25 May 2015 10:24, Sheng Bo Hou sb...@cn.ibm.com wrote: Hi everyone, I am planning to add test cases for volume migration for cinder into tempest. I am wondering how to enable multiple back-ends for cinder in tempest, and connect to different back-ends. For example, I configure one back-end for LVM and the other is for IBM Storwize V7000 driver. Then run the test named like test_volume_migration_LVM_Storwize to test if the migration really works fine. About the configuration, is this something tempest can do so far? Or is this something new we need to add? Thank you very much. Best wishes, Vincent Hou (侯胜博) Staff Software Engineer, Open Standards and Open Source Team, Emerging Technology Institute, IBM China Software Development Lab Tel: 86-10-82450778 Fax: 86-10-82453660 Notes ID: Sheng Bo Hou/China/IBM@IBMCNE-mail: sb...@cn.ibm.com Address:3F Ring, Building 28 Zhongguancun Software Park, 8 Dongbeiwang West Road, Haidian District, Beijing, P.R.C.100193 地址:北京市海淀区东北旺西路8号中关村软件园28号楼环宇大厦3层 邮编：100193 __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
