Re: [openstack-dev] [zun][unit test] Any python utils can collect pci info?
Hi Eric, Thanks for pointing this out. This BP (https://blueprints.launchpad.net/zun/+spec/use-privsep) was created to track the introduction of privsep. Best regards, Hongbin > -Original Message- > From: Eric Fried [mailto:openst...@fried.cc] > Sent: September-18-17 10:51 AM > To: OpenStack Development Mailing List (not for usage questions) > Subject: Re: [openstack-dev] [zun][unit test] Any python utils can > collect pci info? > > You may get a little help from the methods in nova.pci.utils. > > If you're calling out to lspci or accessing sysfs, be aware of this > series [1] and do it via the new privsep mechanisms. > > [1] > https://review.openstack.org/#/q/status:open+project:openstack/nova+bra > nch:master+topic:hurrah-for-privsep > > On 09/17/2017 09:41 PM, Hongbin Lu wrote: > > Hi Shunli, > > > > > > > > I am not aware of any prevailing python utils for this. An > alternative > > is to shell out Linux commands to collect the information. After a > > quick search, it looks xenapi [1] uses “lspci -vmmnk” to collect PCI > > device detail info and “ls /sys/bus/pci/devices//” to > > detect the PCI device type (PF or VF). FWIW, you might find it > helpful > > to refer the implementation of Nova’s xenapi driver for gettiing PCI > resources [2]. > > Hope it helps. > > > > > > > > [1] > > https://github.com/openstack/os- > xenapi/blob/master/os_xenapi/dom0/etc/ > > xapi.d/plugins/xenhost.py#L593 > > > > [2] > > > https://github.com/openstack/nova/blob/master/nova/virt/xenapi/host.py > > #L154 > > > > > > > > Best regards, > > > > Hongbin > > > > > > > > *From:*Shunli Zhou [mailto:shunli6...@gmail.com] > > *Sent:* September-17-17 9:35 PM > > *To:* openstack-dev@lists.openstack.org > > *Subject:* [openstack-dev] [zun][unit test] Any python utils can > > collect pci info? > > > > > > > > Hi all, > > > > > > > > For > > https://blueprints.launchpad.net/zun/+spec/support- > pcipassthroughfilte > > r this BP, Nova use the libvirt to collect the PCI device info. But > > for zun, libvirt seems is a heavy dependecies. Is there a python > utils > > that can be used to collect the PCI device detail info? Such as the > > whether it's a PF of network pci device of VF, the device > > capabilities, etc. > > > > > > > > Note: For 'lspci -D -nnmm' , there are some info can not get. > > > > > > > > > > > > Thanks > > > > > > > > > __ > > OpenStack Development Mailing List (not for usage questions) > > Unsubscribe: > > openstack-dev-requ...@lists.openstack.org?subject:unsubscribe > > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev > > > > ___ > ___ > OpenStack Development Mailing List (not for usage questions) > Unsubscribe: OpenStack-dev- > requ...@lists.openstack.org?subject:unsubscribe > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
Re: [openstack-dev] [zun][unit test] Any python utils can collect pci info?
You may get a little help from the methods in nova.pci.utils. If you're calling out to lspci or accessing sysfs, be aware of this series [1] and do it via the new privsep mechanisms. [1] https://review.openstack.org/#/q/status:open+project:openstack/nova+branch:master+topic:hurrah-for-privsep On 09/17/2017 09:41 PM, Hongbin Lu wrote: > Hi Shunli, > > > > I am not aware of any prevailing python utils for this. An alternative > is to shell out Linux commands to collect the information. After a quick > search, it looks xenapi [1] uses “lspci -vmmnk” to collect PCI device > detail info and “ls /sys/bus/pci/devices//” to detect the > PCI device type (PF or VF). FWIW, you might find it helpful to refer the > implementation of Nova’s xenapi driver for gettiing PCI resources [2]. > Hope it helps. > > > > [1] > https://github.com/openstack/os-xenapi/blob/master/os_xenapi/dom0/etc/xapi.d/plugins/xenhost.py#L593 > > [2] > https://github.com/openstack/nova/blob/master/nova/virt/xenapi/host.py#L154 > > > > Best regards, > > Hongbin > > > > *From:*Shunli Zhou [mailto:shunli6...@gmail.com] > *Sent:* September-17-17 9:35 PM > *To:* openstack-dev@lists.openstack.org > *Subject:* [openstack-dev] [zun][unit test] Any python utils can collect > pci info? > > > > Hi all, > > > > For https://blueprints.launchpad.net/zun/+spec/support-pcipassthroughfilter > this BP, Nova use the libvirt to collect the PCI device info. But for > zun, libvirt seems is a heavy dependecies. Is there a python utils that > can be used to collect the PCI device detail info? Such as the whether > it's a PF of network pci device of VF, the device capabilities, etc. > > > > Note: For 'lspci -D -nnmm' , there are some info can not get. > > > > > > Thanks > > > > __ > OpenStack Development Mailing List (not for usage questions) > Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev > __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
Re: [openstack-dev] [zun][unit test] Any python utils can collect pci info?
Hi Shunli, I am not aware of any prevailing python utils for this. An alternative is to shell out Linux commands to collect the information. After a quick search, it looks xenapi [1] uses “lspci -vmmnk” to collect PCI device detail info and “ls /sys/bus/pci/devices//” to detect the PCI device type (PF or VF). FWIW, you might find it helpful to refer the implementation of Nova’s xenapi driver for gettiing PCI resources [2]. Hope it helps. [1] https://github.com/openstack/os-xenapi/blob/master/os_xenapi/dom0/etc/xapi.d/plugins/xenhost.py#L593 [2] https://github.com/openstack/nova/blob/master/nova/virt/xenapi/host.py#L154 Best regards, Hongbin From: Shunli Zhou [mailto:shunli6...@gmail.com] Sent: September-17-17 9:35 PM To: openstack-dev@lists.openstack.org Subject: [openstack-dev] [zun][unit test] Any python utils can collect pci info? Hi all, For https://blueprints.launchpad.net/zun/+spec/support-pcipassthroughfilter this BP, Nova use the libvirt to collect the PCI device info. But for zun, libvirt seems is a heavy dependecies. Is there a python utils that can be used to collect the PCI device detail info? Such as the whether it's a PF of network pci device of VF, the device capabilities, etc. Note: For 'lspci -D -nnmm' , there are some info can not get. Thanks __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
[openstack-dev] [zun][unit test] Any python utils can collect pci info?
Hi all, For https://blueprints.launchpad.net/zun/+spec/support-pcipassthroughfilter this BP, Nova use the libvirt to collect the PCI device info. But for zun, libvirt seems is a heavy dependecies. Is there a python utils that can be used to collect the PCI device detail info? Such as the whether it's a PF of network pci device of VF, the device capabilities, etc. Note: For 'lspci -D -nnmm' , there are some info can not get. Thanks __ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev