Re: [openstack-dev] [zun] Failed to create Container

2018-11-21 Thread Hongbin Lu
Rania, For question #1, you can do the followings in *each compute node*: * In your kuryr config file (i.e. /etc/kuryr/kuryr.conf), change the config [DEFAULT]kuryr_uri . For example: [DEFAULT] kuryr_uri = http://192.168.1.10:23750 This config decides the IP address and port that the

Re: [openstack-dev] [zun] Failed to create Container

2018-11-20 Thread Rania Adouni
Hi Hongbin , thanks for your advice I did fix it with changing the kuryr-lib to 0.6.0 and my service just work fine and also with lsof -iTCP -sTCP:LISTEN -P I can see it in the list : *kuryr-ser 16581 root5u IPv4 91929 0t0 TCP localhost:23750 (LISTEN)* > that is

Re: [openstack-dev] [zun] Failed to create Container

2018-11-20 Thread Rania Adouni
Hi Hongbin, Yes the version of kuryr-lib is :0.8.0 , So I think I should remove it ! I should remove only the kuryr-lib ! if you have some command they can help me to unisntall it , it will be nice to provide it . Best Regards, Rania Le mer. 21 nov. 2018 à 02:27, Hongbin Lu a écrit : > Hi

Re: [openstack-dev] [zun] Failed to create Container

2018-11-20 Thread Hongbin Lu
Hi Rania, The config option 'driver' was recently renamed, so I guess the problem is the version of kuryr-lib is not right. The Pike release of Zun is matched to kuryr-lib 0.6.0 so you might want to confirm the version of kuryr-lib. $ sudo pip freeze | grep kuryr If the version is not right,

Re: [openstack-dev] [zun] Failed to create Container

2018-11-20 Thread Jacob Burckhardt
d, I guess they have defaults. I suggest commenting any option that mentions "driver" and then restart kuryr-libnetwork. -Jacob Burckhardt From: Rania Adouni Sent: Tuesday, November 20, 2018 4:58 PM To: openstack-dev@lists.openstack.org Subject: Re: [openstack-dev] [zun] Failed to c

Re: [openstack-dev] [zun] Failed to create Container

2018-11-20 Thread Rania Adouni
hi , Thanks for your reply and yes the problem that kuryr-libnetwork is failed to start with the error : ● kuryr-libnetwork.service - Kuryr-libnetwork - Docker network plugin for Neutron Loaded: loaded (/etc/systemd/system/kuryr-libnetwork.service; enabled; vendor preset: enabled) Active:

Re: [openstack-dev] [zun] Failed to create Container

2018-11-20 Thread Jacob Burckhardt
Your error message says it cannot connect to port 23750. That's the kuryr-libnetwork default listen port. On 192.168.1.10, run: lsof -iTCP -sTCP:LISTEN -P On my compute node, it outputs: COMMANDPIDUSER FD TYPE DEVICE SIZE/OFF NODE NAME … kuryr-ser 1976root6u IPv4