On Thu 02 Aug 2007, Stephan Kulow wrote:
Am Donnerstag 02 August 2007 schrieb Peter Nixon:
Hi Guys
I have a problem with zypper that stops all package management from
working. Is this a known problem?
Yes. Factory on x86_64 is broken - I'm still counting how many use it. So
far 3 :)
#
Von: Stephan Kulow [EMAIL PROTECTED]
Gesendet: 02.08.07 13:13:44
An: opensuse-factory@opensuse.org
CC: Peter Nixon [EMAIL PROTECTED]
Betreff: Re: [opensuse-factory] zypper: 'Unsupported kind of Filesystem
Capability'filesystem(minix)-64bit' error
Am Donnerstag 02 August 2007 schrieb
* Peter Nixon [EMAIL PROTECTED] [Aug 02. 2007 13:09]:
Hi Guys
I have a problem with zypper that stops all package management from working.
Is this a known problem?
Yes, this is known and fixed in the meantime.
Klaus
-
To
Dňa Št 2. August 2007 13:21 Peter Nixon napísal:
On Thu 02 Aug 2007, Klaus Kaempf wrote:
* Peter Nixon [EMAIL PROTECTED] [Aug 02. 2007 13:09]:
Hi Guys
I have a problem with zypper that stops all package management from
working. Is this a known problem?
Yes, this is known and
Am Donnerstag 02 August 2007 schrieb Peter Nixon:
On Thu 02 Aug 2007, Klaus Kaempf wrote:
* Peter Nixon [EMAIL PROTECTED] [Aug 02. 2007 13:09]:
Hi Guys
I have a problem with zypper that stops all package management from
working. Is this a known problem?
Yes, this is known and
Hi Guys
I have a problem with zypper that stops all package management from working.
Is this a known problem?
# zypper -vvv ref
Verbosity: 3
Refreshing Factory-gwdg
Downloading:
http://ftp.gwdg.de/pub/opensuse/distribution/SL-OSS-factory/inst-source/content
to
Am Donnerstag 02 August 2007 schrieb Peter Nixon:
Hi Guys
I have a problem with zypper that stops all package management from
working. Is this a known problem?
Yes. Factory on x86_64 is broken - I'm still counting how many use it. So far
3 :)
Greetings, Stephan
--
SUSE LINUX Products
В сообщении от Thursday 02 August 2007 15:28:52 Stephan Kulow написал(а):
Am Donnerstag 02 August 2007 schrieb Peter Nixon:
On Thu 02 Aug 2007, Klaus Kaempf wrote:
* Peter Nixon [EMAIL PROTECTED] [Aug 02. 2007 13:09]:
Hi Guys
I have a problem with zypper that stops all package
Hi,
I'm just trying to install factory (from NFS) with factory-non-oss as
add-on. When going to the software selection, yast says:
opensuse conflicts with factory-extra.
Is this something fundamental or is it because my factory snapshots (oss
and non-oss) are not in sync?
--
Andreas Vetter
Robert Kaiser [EMAIL PROTECTED] writes:
Andreas Jaeger wrote:
Robert Kaiser [EMAIL PROTECTED] writes:
-
Refreshing SUSE_Factory
Error reading repository 'SUSE_Factory':
Unsupported kind of Filesystem Capability'filesystem(minix)-64bit'
Skipping repository 'SUSE_Factory'
Andreas Vetter [EMAIL PROTECTED] writes:
Hi,
I'm just trying to install factory (from NFS) with factory-non-oss as
add-on. When going to the software selection, yast says:
opensuse conflicts with factory-extra.
Is this something fundamental or is it because my factory snapshots (oss
and
Stephan Kulow [EMAIL PROTECTED] writes:
[...]
The DVDs and the source media are only available via bittorrent.
Unfortunately the bittorrents were not created in time, they will be
done soon - and I'll sync them out later tonight.
sorry,
Andreas
--
Andreas Jaeger, Director Platform/openSUSE,
Hello all
I downloaded both the openSUSE-10.3-Alpha7-KDE-i386.iso and
openSUSE-10.3-Alpha7-GNOME-i386.iso this evening and when I tryed to install
them on VMware
on a opensuse 10.2 host I get the following error messages (in both cases)
during the first
initial reboot after installing.
Am Thursday 02 August 2007 schrieb James PEARSON:
Hello all
I downloaded both the openSUSE-10.3-Alpha7-KDE-i386.iso and
openSUSE-10.3-Alpha7-GNOME-i386.iso this evening and when I tryed to
install them on VMware on a opensuse 10.2 host I get the following error
messages (in both cases)
Hi,
I wanted to install openSUSE 10.3-Alpha7 from my local FTP/NFS-Server
So i have to type in the IP-adress of the FTP/NFS-Server but it is not
accepted by the install-program.
The problem appears while Preparation - System Analysis - Initializing
installation catalogs...
When I type in the
Hey Group;
Anyone with a phone modem - question is! What dialer are you using.
It seems kppp is no longer usable due to upgrades in qt3/qt4.
SuSE 103Alpha5 comes with qt3 and parts of 4 - kppp is looking for
libqt-1.45 (as I remember) SuSE showes up with qt3-3.3.8-41
Short of wvdial is there
Yes, I got some problems with kinternet with OSS 10.3 alpha 6.
I must downgrade to ppp, smpppd, wvdial and kinternet from the version
of OSS 10.3 alpha 3plus. The only way to connect with the original
packages of OSS 10.3 alpha 6, was in konsole via wvdial.
Regards
2007/8/2, Donn Washburn [EMAIL
On Friday, 3. August 2007, Donn Washburn wrote:
Anyone with a phone modem - question is! What dialer are you using.
It seems kppp is no longer usable due to upgrades in qt3/qt4.
I've recently used it and seemed to work fine. what is the actual issue (you
used the one from kdenetwork3,
Andreas Jaeger [EMAIL PROTECTED] writes:
Stephan Kulow [EMAIL PROTECTED] writes:
[...]
The DVDs and the source media are only available via bittorrent.
Unfortunately the bittorrents were not created in time, they will be
done soon - and I'll sync them out later tonight.
Everything is
Hello,
Neotron wrote:
When I type in the IP the error message is:
A valid domain name consists of components seperated by dots.
Each component contains letters, digits an hyphens. A hyphen may not
start or end a component and the last component man not begin with a digit.
Known problem, I
Neotron [EMAIL PROTECTED] writes:
Hi,
I wanted to install openSUSE 10.3-Alpha7 from my local FTP/NFS-Server
So i have to type in the IP-adress of the FTP/NFS-Server but it is not
accepted by the install-program.
The problem appears while Preparation - System Analysis - Initializing
Hello,
is this known ?
after new installing Alpha 7 (nfs) from factory and configure the network no
resolv.conf is written ?
--
mit freundlichen Grüssen / best Regards
Günther J. Niederwimmer
-
To unsubscribe, e-mail:
Hello,
is this featcher is gon ?
I can't find it any more in the /etc/sysconfig/displaymanager
--
mit freundlichen Grüssen / best Regards
Günther J. Niederwimmer
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional
Hello
I´ve installed KDE cd aplha7 and NumLock is still off after boot.Problem
isn´t solved.From dvd (aplha6) it worked for me, but from KDE cd not:-(
So, i´d like to ask.Does anybody work on bug #294295?It seems nobody works
on it.
Best regards, Rasťo
Patrick Shanahan schrieb:
close, install webpin and get it from the cl.
cheers m8. i'll check it out.
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
For retrieval of a single message number N in the
archive I have to send a message to
[EMAIL PROTECTED]
Is it possible to find out the number N without
downloading the compressed mbox from the archiv?
__ Wissenswertes zum Thema PC, Zubehör
oder Programme.
Hello,
Having to buy a new HP printer/scanner/copier I see an offer for an HP
2575 with HP wifi kit.
I have two questions:
* I have already an HP PSP 750. I _can't_ both print and scan
(openSUSE 10.1). When I try to configure the scanner with Yast, I have
a warning of compatibility problem.
Munkii schreef:
after going through the installation instruction described at this link:
http://awn.wetpaint.com/page/SVN+Version+Installation multiple times
and with all the built-in dependency hell, i end up with this error:
grep: /opt/gnome/lib/libgtk-x11-2.0.la: No such file or
Philipp Thomas schreef:
On Thu, 02 Aug 2007 02:07:35 +0300, Munkii wrote:
after going through the installation instruction described at this link:
http://awn.wetpaint.com/page/SVN+Version+Installation multiple times
and with all the built-in dependency hell, i end up with this error:
1.
Am Mittwoch, den 01.08.2007, 18:33 +0200 schrieb [EMAIL PROTECTED]:
On Wed, 2007-08-01 at 17:38 +0200, Rainer Klier wrote:
and before, check if the good 6400s are still sold by dell in your
country
I still can buy it in Germany.
Look at this: (German I am afraid, but you can make
On Thu, 02 Aug 2007 02:07:35 +0300, Munkii wrote:
after going through the installation instruction described at this link:
http://awn.wetpaint.com/page/SVN+Version+Installation multiple times
and with all the built-in dependency hell, i end up with this error:
1. These instructions were
2007/8/1, Ciro Iriarte [EMAIL PROTECTED]:
Hi, I'm running Opensuse 10.2 on a Dell Inspiron 6400, just some notes:
- Intel 945GM Graphic Card: Works fine, but couldn't make the S-Video
output work.
- Ricoh Memory Card reader: It's detected but didn't use it yet.
- Intel Corporation
On 02/08/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
On Wed, 2007-08-01 at 17:38 +0200, Rainer Klier wrote:
but not as new computer any more.
current inspiron 6400s have a pentium processor, NOT a core duo!
but maybe you are lucky and dell is still selling the 6400s with core 2
duo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
All,
Has anyone else noticed that ReplyToList extension in Thunderbird is no
longer working since the last update. Option is greyed out. Does not
look as if there is much chance of an update from the author soon
however :-(
- --
G T Smith wrote:
All,
Has anyone else noticed that ReplyToList extension in Thunderbird is no
longer working since the last update. Option is greyed out. Does not
look as if there is much chance of an update from the author soon
however :-(
Hi,
I am using tbird 2.0 but I remember that
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Thursday 2007-08-02 at 12:13 +0200, Eberhard Roloff wrote:
Hi,
I am using tbird 2.0 but I remember that I never needed the replytolist
extension, even with Tbird 1.5 .
I just right click on a mail that I like to reply to and choose
Reply
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Eberhard Roloff wrote:
G T Smith wrote:
All,
Has anyone else noticed that ReplyToList extension in Thunderbird is no
longer working since the last update. Option is greyed out. Does not
look as if there is much chance of an update from the
On 08/02/2007 06:03 PM, G T Smith wrote:
Has anyone else noticed that ReplyToList extension in Thunderbird is no
longer working since the last update. Option is greyed out. Does not
look as if there is much chance of an update from the author soon
however :-(
Actually, though I use
On 08/02/2007 03:29 PM, jdd wrote:
Having to buy a new HP printer/scanner/copier I see an offer for an HP
2575 with HP wifi kit.
I have two questions:
* I have already an HP PSP 750. I _can't_ both print and scan
(openSUSE 10.1).
Are you using hplip? I had no problem doing both with my
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Thursday 2007-08-02 at 08:36 +0200, Theo Wollenleben wrote:
For retrieval of a single message number N in the
archive I have to send a message to
[EMAIL PROTECTED]
Is it possible to find out the number N without
downloading the compressed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
G T Smith wrote:
Eberhard Roloff wrote:
G T Smith wrote:
All,
Has anyone else noticed that ReplyToList extension in Thunderbird is no
longer working since the last update. Option is greyed out. Does not
look as if there is much chance of an
jdd wrote:
Hello,
Having to buy a new HP printer/scanner/copier I see an offer for an HP
2575 with HP wifi kit.
I have two questions:
* I have already an HP PSP 750. I _can't_ both print and scan
(openSUSE 10.1). When I try to configure the scanner with Yast, I have
a warning of
Thanks for your suggestion. I actually got it working so below is a summary of
what I did for the benefit of anyone else having the same problem:
1. Deleted any of the partitions created for/by linux (leaving the Windows
main partition, the recovery partition and the dell utility partition)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joe Morris (NTM) wrote:
On 08/02/2007 06:03 PM, G T Smith wrote:
Has anyone else noticed that ReplyToList extension in Thunderbird is no
longer working since the last update. Option is greyed out. Does not
look as if there is much chance of an
On Thu 2 August 2007 11:51:03 Joe Morris (NTM) wrote:
Are you using hplip? I had no problem doing both with my PSC 2175 with
10.1. I assume you meant PSC 750, which according to
http://hplip.sourceforge.net/supported_devices/combined.html is supported.
I can confirm this - I set a PSC 750 up
On 08/02/2007 07:16 PM, G T Smith wrote:
Joe Morris (NTM) wrote:
Actually, though I use Thunderbird 2, I think the extension is fine.
The problem is with Enigmail. It will work again if you install Mnenhy
extension. Enigmail evidently does not export the header info as it
used to.
G T Smith schreef:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
All,
Has anyone else noticed that ReplyToList extension in Thunderbird is no
longer working since the last update. Option is greyed out. Does not
look as if there is much chance of an update from the author soon
however
Hello,
On Aug 2 09:29 jdd wrote (shortened):
* I have already an HP PSP 750.
I never heard about such a model. Please ask HP via
http://hplip.sourceforge.net/mailing_lists.html
regarding support for PSP models.
I _can't_ both print and scan (openSUSE 10.1). When I try to
configure the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joe Morris (NTM) wrote:
On 08/02/2007 07:16 PM, G T Smith wrote:
Joe Morris (NTM) wrote:
Actually, though I use Thunderbird 2, I think the extension is fine.
The problem is with Enigmail. It will work again if you install Mnenhy
extension.
On Thu, August 2, 2007 12:39 am, Pigia wrote:
Kai Ponte ha scritto:
On Wed, August 1, 2007 2:04 am, Pigia wrote:
News:
still system is not mounting devices but now the error message has
changed to hal-storage-removable-mount refused uid 1.
What I have done is manually add the line:
On Thu, 02 Aug 2007 00:16:35 +0200
Fernando Costa [EMAIL PROTECTED] wrote:
I used Partition Magic to resize the partition
As has been mentioned previously, you need to resize the file system as
Partition Magic will not. The command line utility is: resize2fs.
I have found that QTParted tends
On Thu, 02 Aug 2007 12:39:05 +0200
Eberhard Roloff [EMAIL PROTECTED] wrote:
HP is the only vendor that really cares for Linux and they have an
excellent Linux Support.
For anything HP Printing and HP Multipurpose-Device related, refer to
http://hplip.sourceforge.net/
There you might be
On 8/2/07, Carlos E. R. [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Thursday 2007-08-02 at 08:36 +0200, Theo Wollenleben wrote:
For retrieval of a single message number N in the
archive I have to send a message to
[EMAIL PROTECTED]
Is it possible to
How do,
On Thu, 2007-08-02 at 09:59 -0400, Jerry Feldman wrote:
I agree that HP does a good job supporting Linux especially at the high
end since Linux based servers is a big business for them.
But, I think that Brother and Epson tend also to work well with Linux.
Canon and Lexmark can't
On Thu, 2007-08-02 at 09:31 +0200, Philipp Thomas wrote:
On Thu, 02 Aug 2007 02:07:35 +0300, Munkii wrote:
1. These instructions were obviously written for debian, as apt-get is
not necesarily the tool of choice for openSUSE.
worse, it's written for ubuntu, haven't you noticed that
On Thu, 2007-08-02 at 09:51 +0200, Jos van Kan wrote:
Philipp Thomas schreef...
..I'd suggest looking at Requires and BuildRequires entries in the .spec
file of the GURU .src.rpm to possibly get a hint what packages are
needed.
Better still: use the page:
On Thu, 2007-08-02 at 09:08 +0200, Jos van Kan wrote:
Munkii schreef:
after going through the installation instruction described at this link:
http://awn.wetpaint.com/page/SVN+Version+Installation multiple times
and with all the built-in dependency hell, i end up with thi
make[1]:
The window decorations disappear after closing the first window of a session.
you have to do a emerald --replace after each window operation to get the
borders back. Still get total crash on logout from kde. Not usable :-(
I tried with emerald and kde-window-decorator.
nvidia, no xgl on 10.2
Andy Harrison a écrit :
I accidentally chose eth3 as my default ethernet interface. How do I
change it to eth0?
Hello,
Edit the file /etc/udev/rules.d/30-net_persistent_names.rules
change eth3 to eth0 and restart the network. Take care not to have
another eth0 in this file !!
Michel.
I accidentally chose eth3 as my default ethernet interface. How do I
change it to eth0?
--
Andy Harrison
public key: 0x67518262
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
primm wrote:
The window decorations disappear after closing the first window of a
session.
you have to do a emerald --replace after each window operation to get
the
borders back. Still get total crash on logout from kde. Not usable :-(
I tried with emerald and kde-window-decorator.
On my Laptop which runs 10.0 I found that instead of name of my net
(constant.net) the word reached shows up.
Same in my Gkrellm header.
Looked all over the setup but do not seem to find the place to correct this
unimportant fact. Somebody could my point in the just direction?
--
To
I may just be having a brain fart, but I can't seem to get Ldap working
on
my system and for some even stranger problem it will not let me print any
of the config files out (help), as my normal user, file manager superuser
mode, and as root.
OpenSuse 10.2-x86-64 with the openldap
Constant Brouerius van Nidek wrote:
On my Laptop which runs 10.0 I found that instead of name of my net
(constant.net) the word reached shows up.
Same in my Gkrellm header.
Looked all over the setup but do not seem to find the place to correct this
unimportant fact. Somebody could my point
On Thursday 02 August 2007 18:48, Michael Letourneau wrote:
primm wrote:
The window decorations disappear after closing the first window of a
session.
you have to do a emerald --replace after each window operation to get
the
borders back. Still get total crash on logout from kde. Not
On Friday 03 August 2007, Pete Connolly wrote:
Constant Brouerius van Nidek wrote:
On my Laptop which runs 10.0 I found that instead of name of my net
(constant.net) the word reached shows up.
Same in my Gkrellm header.
Looked all over the setup but do not seem to find the place to
-Original Message-
From: Constant Brouerius van Nidek [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 02, 2007 1:43 PM
To: opensuse@opensuse.org
Subject: Re: [opensuse] only a very small nuisance
On Friday 03 August 2007, Pete Connolly wrote:
Constant Brouerius van Nidek
-Original Message-
From: ka1ifq [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 02, 2007 1:26 PM
To: opensuse@opensuse.org
Subject: [opensuse] openldap problem / question
I may just be having a brain fart, but I can't seem to
get Ldap working
on
my system and for
On 8/2/07, Catimimi [EMAIL PROTECTED] wrote:
Hello,
Edit the file /etc/udev/rules.d/30-net_persistent_names.rules
change eth3 to eth0 and restart the network. Take care not to have
another eth0 in this file !!
That seems like a pretty kludgy way to do it. I just don't want
KNetworkManager
Have you recently update your kernel?
On Thursday 02 August 2007 22:16, [EMAIL PROTECTED] wrote:
Hi there,
my network interface eth0 suddenly does not come up properly anymore
(I'm using openSUSE 10.2), even though it continues to work fine when
I use a Live CD or Windoze.
I am absolutely
Well, just the regular update to 2.6.18.8-0.5 but it worked after
that. Actually, I don't recall any tweaking on my side the day before
it stopped working..
On 8/2/07, Cristea Bogdan [EMAIL PROTECTED] wrote:
Have you recently update your kernel?
On Thursday 02 August 2007 22:16, [EMAIL
i think i found out what the problem is, after a small search on webpin,
it turned out that the current libtool package is not compatible with
gtk2-devel-2.10.11 in the GNOME:STABLE repo, because it stores the lib
files in /usr/lib/ instead of 10.2's default /opt/gnome/lib.
i was able to fix the
On Thursday 02 August 2007 10:43, Constant Brouerius van Nidek wrote:
Hi Pete,
Must be close to the solution.
No idea where to change the hostname using DHCP. Could not fine anything
useful.
Go to Yast/Network Devices/Network Card, and when the window opens edit the
configuration for your
Hi there,
my network interface eth0 suddenly does not come up properly anymore
(I'm using openSUSE 10.2), even though it continues to work fine when
I use a Live CD or Windoze.
I am absolutely not an expert on networking stuff. The only thing I
realize is that, both during boot time and
I'm trying to use a pcmcia serial port card in OpenSuse 10.2 x86-64. The card
is recognized, but not useable. The messages log shows this message when the
card is inserted and serial_cs is loaded:
Aug 2 14:28:52 bernie-laptop kernel: pccard: PCMCIA card inserted into slot 0
Aug 2 14:28:52
Constant Brouerius van Nidek wrote:
On Friday 03 August 2007, Pete Connolly wrote:
Constant Brouerius van Nidek wrote:
On my Laptop which runs 10.0 I found that instead of name of my net
(constant.net) the word reached shows up.
I had something like this a long time ago,
On 8/2/07, Pete Connolly [EMAIL PROTECTED] wrote:
box 'change hostname via DHCP' is ticked. If so, untick it and restart
your system.
There is no need to restart the system. It's going to restart the
network services, and everything will be OK.
--
Svetoslav Milenov (Sunny)
Even the most
Sunny wrote:
On 8/2/07, Pete Connolly [EMAIL PROTECTED] wrote:
box 'change hostname via DHCP' is ticked. If so, untick it and restart
your system.
There is no need to restart the system. It's going to restart the
network services, and everything will be OK.
You are correct
On Thu, 02 Aug 2007 18:12:10 +0300, Munkii wrote:
http://awn.wetpaint.com/page/SuSE+RPM+Specfile?t=anon
i don't know, it sounded like a mind job, i'm not familiar with building
rpm's, and i'm not going to start now, i have too much stuff going, i'm
sure there's an easier way.. no?
It *is*
Ok thaks for your advices. I'll check them out and see if I find other
problems...
2007/8/1, Curtis Grote [EMAIL PROTECTED]:
On Wednesday 01 August 2007 13:45, Daniel Antonio Peraza Cedrez wrote:
Hi, I need to learn some things about Samba, NIS, OpenLDAP, and all
that stuff. Could someone
On Fri, 2007-08-03 at 00:06 +0200, Philipp Thomas wrote:
On Thu, 02 Aug 2007 18:12:10 +0300, Munkii wrote:
http://awn.wetpaint.com/page/SuSE+RPM+Specfile?t=anon
i don't know, it sounded like a mind job, i'm not familiar with building
rpm's, and i'm not going to start now, i have too
Hi all,
I own a Sonic (Microdia) webcam that is not supported right now, but
surfing the net I found the drivers that make the webcam works in Ubuntu
Feisty. The driver is not opensource and it is just compiled for Ubuntu
(a .deb package). Is there any way to install debian packages in openSUSE?
Thanks for your reply, I used the GParted Live CD to repair the
filesystem and my OS recognizes all the partition size...
Jerry Feldman wrote:
On Thu, 02 Aug 2007 00:16:35 +0200
Fernando Costa [EMAIL PROTECTED] wrote:
I used Partition Magic to resize the partition
As has been
(BL) - Before Linux
Every one who has replied is quite correct in my
experience in that the suggestions lead towards very
new components. The best thought I have read was to
think about purchasing a Dell unit that can be shipped
in a Linux Distro.
This has not always been the case and If you
do i have to open specific port for rsync if i m running a firewall?
thx
hans
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
do i have to open specific port for rsync if i m running a firewall?
thx
hans
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Hans Linux wrote:
do i have to open specific port for rsync if i m running a firewall?
Yes, if you're doing rsync with another machine over the network.
Joe
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On Thursday 02 August 2007 14:01, Marlier, Ian wrote:
-Original Message-
From: ka1ifq [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 02, 2007 1:26 PM
To: opensuse@opensuse.org
Subject: [opensuse] openldap problem / question
I may just be having a brain fart, but I
88 matches
Mail list logo
