Re: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg bcm43xx-firmware]
Il giorno ven 17 apr 2020 alle ore 17:49 Guillaume Gardet
ha scritto:
>
> Hi,
>
> > -Original Message-
> > From: Alessio Adamo
> > Sent: 17 April 2020 15:35
> > To: Guillaume Gardet
> > Cc: OS-arm
> > Subject: Re: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg
> > bcm43xx-
> > firmware]
> >
> > Hi Guillaume,
> >
> > indeed that worked and I filed a bug to suggest the fix.
> > https://bugzilla.opensuse.org/show_bug.cgi?id=1169771
>
> Thanks.
>
> >
> > Now, what do you suggest to get to the next step, that is having a fully
> > functional
> > Bluetooth stack?
> > I have managed to get Bluetooth working on my cubox-i, but that requires a
> > .hcd
> > file not provided by the bcm43xx-firmware package, the program
> > brcm_patchram_plus and possibly an udev rule and a systemd service.
>
> That's weird you need so much additional things.
> Please explain what does each additional components and why they are needed.
> Someone else could provide some guidance here as well.
Basically, I had to replicate this package:
https://repo.solid-build.xyz/debian/buster/bsp-imx6/cuboxi-firmware-wireless_14.tar.xz
I had to place the right .hcd file in /lib/firmware/brcm
(BCM4330B1.hcd for the chip of my cubox-i) and just for convenience I
created a symlink named bcm4330.hcd.
Then I had to compile brcm_patchram_plus.c and place the compiled
program in /usr/sbin.
To activate the Bluetooth then I have to run
/usr/sbin/brcm_patchram_plus --patchram /lib/firmware/brcm/4330.hcd
--baudrate 150 --use_baudrate_for_download /dev/ttymxc3
--enable_hci --no2bytes --tosleep=5
In that package there is also a udev rule that conveniently starts a
systemd service based on the chip model found.
Content of /lib/udev/rules.d/60-cuboxi-bt.rules :
# brcm4329 and 4330 bluetooth
SUBSYSTEMS=="sdio", ATTRS{vendor}=="0x02d0",
ATTRS{device}=="0x4329",
ENV{SYSTEMD_WANTS}="brcm_patchram_plus@bcm4329.service"
SUBSYSTEMS=="sdio", ATTRS{vendor}=="0x02d0",
ATTRS{device}=="0x4330",
ENV{SYSTEMD_WANTS}="brcm_patchram_plus@bcm4330.service"
Content of /usr/lib/systemd/system/brcm_patchram_plus@.service
[Unit]
Description=Broadcom bluetooth firmware loader
ConditionPathExists=/dev/ttymxc3
ConditionPathExists=!/proc/device-tree/soc/aips-bus@0210/serial@021f/bluetooth
After=local-fs.target remote-fs.target
[Service]
Type=simple
Restart=on-success
ExecStart=/usr/sbin/brcm_patchram_plus --patchram
/lib/firmware/brcm/%I.hcd --baudrate 150
--use_baudrate_for_download /dev/ttymxc3 --enable_hci --no2bytes
--tosleep=5
I hope this helps.
Alessio
>
> Cheers,
> Guillaume
>
>
> > Should I make a stand alone package and try to have it accepted, or should
> > I ask
> > the maintainer to integrate everything into the bcm43xx-firmware package?
> >
> > Thanks for guidance.
> >
> > Kind regards,
> >
> > Alessio
> >
> > Il giorno ven 17 apr 2020 alle ore 09:13 Guillaume Gardet
> > ha scritto:
> > >
> > > Hi Alessio,
> > >
> > > > -Original Message-
> > > > From: Alessio Adamo
> > > > Sent: 16 April 2020 21:40
> > > > To: OS-arm
> > > > Subject: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg
> > > > bcm43xx- firmware]
> > > >
> > > > Hi everybody,
> > > >
> > > > I was trying to achieve Bluetooth activation on my cubox-i, and
> > > > while tinkering I realized a putative bug in the script
> > > > 'install-brcmfmac.sh' used by the package 'bcm43xx-firmware'.
> > > > The script parses the file '/sys/firmware/devicetree/base/compatible'
> > > > looking for 'solidrun,cubox-i', however it is not successful,
> > > > because in my personal case it actually retrieves 'solidrun,cubox-i/q'.
> > > > Because of this, the symbolic link
> > > > '/lib/firmware/brcm/brcmfmac4330-sdio.txt' is not created and
> > > > brcmfmac fails with the following error messages:
> > > >
> > > > [ 21.774391] brcmfmac: brcmf_fw_alloc_request: using
> > > > brcm/brcmfmac4330-sdio for chip BCM4330/4
> > > > [ 21.833131] brcmfmac mmc0:0001:1: Direct firmware load for
> > > > brcm/brcmfmac4330-sdio.solidrun,cubox-i/q.txt failed with error -2
> > > > [ 21.833205] brcmfmac mmc0:0001:1: Direct firmware load for
> > > > brcm/brcmfmac4330-sdio.txt failed with error -2
> > > >
> > > > The content of '/sys/firmware/devicetree/base/compatible' is:
> > > > solidrun,cubox-i/q^@fsl,imx6q^@
> > > >
> > > > Probably because it is a Cubox-i Pro Quad Core.
> > > > Should the pattern for case statement be changed into
> > > >
> > > > solidrun,cubox-i|solidrun,cubox-i/q)
> > > >
> > > > ?
> > >
> > > Could you give it a try and also report this problem on
> > https://bugzilla.opensuse.org please?
> > >
> > > Thanks,
> > > Guillaume
> > >
> > > >
> > > > Ciao
> > > > Alessio
> > > > --
> > > > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
> > > > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
> > >
> > > IMPORTANT NOTICE: The contents of this email and any attachments are
> > confidential and may
RE: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg bcm43xx-firmware]
Hi,
> -Original Message-
> From: Alessio Adamo
> Sent: 17 April 2020 15:35
> To: Guillaume Gardet
> Cc: OS-arm
> Subject: Re: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg bcm43xx-
> firmware]
>
> Hi Guillaume,
>
> indeed that worked and I filed a bug to suggest the fix.
> https://bugzilla.opensuse.org/show_bug.cgi?id=1169771
Thanks.
>
> Now, what do you suggest to get to the next step, that is having a fully
> functional
> Bluetooth stack?
> I have managed to get Bluetooth working on my cubox-i, but that requires a
> .hcd
> file not provided by the bcm43xx-firmware package, the program
> brcm_patchram_plus and possibly an udev rule and a systemd service.
That's weird you need so much additional things.
Please explain what does each additional components and why they are needed.
Someone else could provide some guidance here as well.
Cheers,
Guillaume
> Should I make a stand alone package and try to have it accepted, or should I
> ask
> the maintainer to integrate everything into the bcm43xx-firmware package?
>
> Thanks for guidance.
>
> Kind regards,
>
> Alessio
>
> Il giorno ven 17 apr 2020 alle ore 09:13 Guillaume Gardet
> ha scritto:
> >
> > Hi Alessio,
> >
> > > -Original Message-
> > > From: Alessio Adamo
> > > Sent: 16 April 2020 21:40
> > > To: OS-arm
> > > Subject: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg
> > > bcm43xx- firmware]
> > >
> > > Hi everybody,
> > >
> > > I was trying to achieve Bluetooth activation on my cubox-i, and
> > > while tinkering I realized a putative bug in the script
> > > 'install-brcmfmac.sh' used by the package 'bcm43xx-firmware'.
> > > The script parses the file '/sys/firmware/devicetree/base/compatible'
> > > looking for 'solidrun,cubox-i', however it is not successful,
> > > because in my personal case it actually retrieves 'solidrun,cubox-i/q'.
> > > Because of this, the symbolic link
> > > '/lib/firmware/brcm/brcmfmac4330-sdio.txt' is not created and
> > > brcmfmac fails with the following error messages:
> > >
> > > [ 21.774391] brcmfmac: brcmf_fw_alloc_request: using
> > > brcm/brcmfmac4330-sdio for chip BCM4330/4
> > > [ 21.833131] brcmfmac mmc0:0001:1: Direct firmware load for
> > > brcm/brcmfmac4330-sdio.solidrun,cubox-i/q.txt failed with error -2
> > > [ 21.833205] brcmfmac mmc0:0001:1: Direct firmware load for
> > > brcm/brcmfmac4330-sdio.txt failed with error -2
> > >
> > > The content of '/sys/firmware/devicetree/base/compatible' is:
> > > solidrun,cubox-i/q^@fsl,imx6q^@
> > >
> > > Probably because it is a Cubox-i Pro Quad Core.
> > > Should the pattern for case statement be changed into
> > >
> > > solidrun,cubox-i|solidrun,cubox-i/q)
> > >
> > > ?
> >
> > Could you give it a try and also report this problem on
> https://bugzilla.opensuse.org please?
> >
> > Thanks,
> > Guillaume
> >
> > >
> > > Ciao
> > > Alessio
> > > --
> > > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
> > > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
> >
> > IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended
> recipient,
> please notify the sender immediately and do not disclose the contents to any
> other person, use it for any purpose, or store or copy the information in any
> medium. Thank you.
IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended recipient,
please notify the sender immediately and do not disclose the contents to any
other person, use it for any purpose, or store or copy the information in any
medium. Thank you.
N�r��y隊Z)z{.�櫛맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.�櫛�0�Ǩ�
RE: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg bcm43xx-firmware]
Hi Alessio, > -Original Message- > From: Alessio Adamo > Sent: 16 April 2020 21:40 > To: OS-arm > Subject: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg bcm43xx- > firmware] > > Hi everybody, > > I was trying to achieve Bluetooth activation on my cubox-i, and while > tinkering I > realized a putative bug in the script 'install-brcmfmac.sh' used by the > package > 'bcm43xx-firmware'. > The script parses the file '/sys/firmware/devicetree/base/compatible' > looking for 'solidrun,cubox-i', however it is not successful, because in my > personal > case it actually retrieves 'solidrun,cubox-i/q'. > Because of this, the symbolic link > '/lib/firmware/brcm/brcmfmac4330-sdio.txt' is not created and brcmfmac fails > with the following error messages: > > [ 21.774391] brcmfmac: brcmf_fw_alloc_request: using > brcm/brcmfmac4330-sdio for chip BCM4330/4 > [ 21.833131] brcmfmac mmc0:0001:1: Direct firmware load for > brcm/brcmfmac4330-sdio.solidrun,cubox-i/q.txt failed with error -2 > [ 21.833205] brcmfmac mmc0:0001:1: Direct firmware load for > brcm/brcmfmac4330-sdio.txt failed with error -2 > > The content of '/sys/firmware/devicetree/base/compatible' is: > solidrun,cubox-i/q^@fsl,imx6q^@ > > Probably because it is a Cubox-i Pro Quad Core. > Should the pattern for case statement be changed into > > solidrun,cubox-i|solidrun,cubox-i/q) > > ? Could you give it a try and also report this problem on https://bugzilla.opensuse.org please? Thanks, Guillaume > > Ciao > Alessio > -- > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Re: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg bcm43xx-firmware]
Hi Guillaume, indeed that worked and I filed a bug to suggest the fix. https://bugzilla.opensuse.org/show_bug.cgi?id=1169771 Now, what do you suggest to get to the next step, that is having a fully functional Bluetooth stack? I have managed to get Bluetooth working on my cubox-i, but that requires a .hcd file not provided by the bcm43xx-firmware package, the program brcm_patchram_plus and possibly an udev rule and a systemd service. Should I make a stand alone package and try to have it accepted, or should I ask the maintainer to integrate everything into the bcm43xx-firmware package? Thanks for guidance. Kind regards, Alessio Il giorno ven 17 apr 2020 alle ore 09:13 Guillaume Gardet ha scritto: > > Hi Alessio, > > > -Original Message- > > From: Alessio Adamo > > Sent: 16 April 2020 21:40 > > To: OS-arm > > Subject: [opensuse-arm] Possible bug in install-brcmfmac.sh [pkg bcm43xx- > > firmware] > > > > Hi everybody, > > > > I was trying to achieve Bluetooth activation on my cubox-i, and while > > tinkering I > > realized a putative bug in the script 'install-brcmfmac.sh' used by the > > package > > 'bcm43xx-firmware'. > > The script parses the file '/sys/firmware/devicetree/base/compatible' > > looking for 'solidrun,cubox-i', however it is not successful, because in my > > personal > > case it actually retrieves 'solidrun,cubox-i/q'. > > Because of this, the symbolic link > > '/lib/firmware/brcm/brcmfmac4330-sdio.txt' is not created and brcmfmac fails > > with the following error messages: > > > > [ 21.774391] brcmfmac: brcmf_fw_alloc_request: using > > brcm/brcmfmac4330-sdio for chip BCM4330/4 > > [ 21.833131] brcmfmac mmc0:0001:1: Direct firmware load for > > brcm/brcmfmac4330-sdio.solidrun,cubox-i/q.txt failed with error -2 > > [ 21.833205] brcmfmac mmc0:0001:1: Direct firmware load for > > brcm/brcmfmac4330-sdio.txt failed with error -2 > > > > The content of '/sys/firmware/devicetree/base/compatible' is: > > solidrun,cubox-i/q^@fsl,imx6q^@ > > > > Probably because it is a Cubox-i Pro Quad Core. > > Should the pattern for case statement be changed into > > > > solidrun,cubox-i|solidrun,cubox-i/q) > > > > ? > > Could you give it a try and also report this problem on > https://bugzilla.opensuse.org please? > > Thanks, > Guillaume > > > > > Ciao > > Alessio > > -- > > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org > > IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
