Re: [opensuse-arm] Re: New Raspberry Pi image available

2013-09-06 Thread Freek de Kruijf
Will try later: xzcat [image].raw.xz | dd bs=4M of=/dev/sdX; sync -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Re: New Raspberry Pi image available

2013-09-11 Thread Freek de Kruijf
Op maandag 9 september 2013 13:46:34 schreef Guillaume Gardet: Le 09/09/2013 13:26, Freek de Kruijf a écrit : I found a problem after inserting a WiFi USB stick. It reported a non existing folder, /lib/modules/3.1.10-5-raspberrypi. There is an existing folder /lib/modules/3.11.0-rc4-5

[opensuse-arm] Package bluez is missing in repository for armv6hl

2013-09-11 Thread Freek de Kruijf
? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Starting network module of YaST in raspberrypi kernel stalls program

2013-09-11 Thread Freek de Kruijf
/YaST2/install.inf which does not exist in the raspberrypi kernel package. I could start the module using the initial kernel. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] zypper up raspberrypi-gfx gives error

2013-09-16 Thread Freek de Kruijf
On maandag 16 september 2013 08:47:48 wrote guillaume.gar...@free.fr: - Freek de Kruijf fr...@opensuse.org a écrit : I did a zypper up and found a few raspberry packages to be updated. One of them, raspberrypi-gfx, however refuses to be installed. Try a zypper rm and then a zypper

[opensuse-arm] clamav not available on openSUSE 13.1 repository for armv6hl

2014-02-04 Thread Freek de Kruijf
repository the package is build OK for the enabled architectures. How can I be of help to make it build for armv6hl and other architectures? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow

Re: [opensuse-arm] clamav not available on openSUSE 13.1 repository for armv6hl

2014-02-04 Thread Freek de Kruijf
Op dinsdag 4 februari 2014 12:58:31 schreef Andreas Schwab: Freek de Kruijf fr...@opensuse.org writes: Checking the openSUSE build service it appears that clamav is locked, All packages are locked in openSUSE:13.1. It has been released. How can I be of help to make it build for armv6hl

Re: [opensuse-arm] clamav not available on openSUSE 13.1 repository for armv6hl

2014-02-05 Thread Freek de Kruijf
Op dinsdag 4 februari 2014 14:35:06 schreef Freek de Kruijf: Op dinsdag 4 februari 2014 13:49:18 schreef Andreas Schwab: Freek de Kruijf fr...@opensuse.org writes: Please give me some hints, how to proceed and where and what to branch. Once you have branched it you can additional

Re: [opensuse-arm] clamav not available on openSUSE 13.1 repository for armv6hl

2014-02-06 Thread Freek de Kruijf
Op woensdag 5 februari 2014 12:23:40 schreef u: Freek de Kruijf fr...@opensuse.org writes: I played around on the OBS website branching security:clamav, but this one did not have a possibility to add the armv6l architecture. You'll need to add a new repository that points

Re: [opensuse-arm] OS 13.1 Raspberry Pi image, Build 38.1 has no apparent root filesystem

2014-06-25 Thread Freek de Kruijf
partitions permanently. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] OpenSuse-Version for the Raspberry Pi

2014-08-02 Thread Freek de Kruijf
Op zaterdag 2 augustus 2014 07:57:16 schreef Edgar Dombrowski: Am 01.08.2014 20:40, schrieb Freek de Kruijf: See https://en.opensuse.org/HCL:Raspberry_Pi Hi, Freek. Thanks for your information. I just downloaded the Instructions and the associated software. I hope it will works

Re: [opensuse-arm] Installed the build for raspberry 13.1

2014-10-07 Thread Freek de Kruijf
computer? I have the same problem in that case. My SD card interface can only be used for reading and not for writing, it is write protected. I have an USB device in which I can insert a SD card. In that case I can write the SD card. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe

[opensuse-arm] Using image 13.2 headless

2014-11-22 Thread Freek de Kruijf
openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Using image 13.2 headless

2014-11-22 Thread Freek de Kruijf
/YaST2/reconfig_system . However after booting the system headless, the network did not appear. I documented this on the wiki. Please help me to get it running. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e

Re: [opensuse-arm] Using image 13.2 for Raspberry Pi headless

2014-11-22 Thread Freek de Kruijf
/YaST2/reconfig_system . However after booting the system headless, the network did not appear. I documented this on the wiki. Please help me to get it running. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e

Re: [opensuse-arm] Using Raspberry Pi image 13.2 headless

2014-11-23 Thread Freek de Kruijf
the trick. Now I can log in using root and the published password. Will change it immediately, although it is only connected locally. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow

Re: [opensuse-arm] How to resize 13.2 Raspberry Pi image

2014-11-26 Thread Freek de Kruijf
Op dinsdag 25 november 2014 14:09:06 schreef u: On 25/11/14 09:32, Freek de Kruijf wrote: Op dinsdag 25 november 2014 04:00:44 schreef Sid Boyce: I use large sizes of SD cards. After burning the image, e.g to /dev/sdb, remove the SD card and insert it again. gparted /dev/sdb

[opensuse-arm] Problem with freshclam and clamd and ntp

2014-11-26 Thread Freek de Kruijf
after finishing the ntpd.service and also tried ntp-wait.service but that did not work. When asking for the systemctl status for these services I still see log entries with Jan 01 as date. Only the last log line has the than current date. Any suggestions? -- fr.gr. member openSUSE Freek de

Re: [opensuse-arm] How to resize 13.2 Raspberry Pi image

2014-11-26 Thread Freek de Kruijf
Op woensdag 26 november 2014 11:58:11 schreef Alexander Graf: On 26.11.14 11:49, Freek de Kruijf wrote: Op woensdag 26 november 2014 10:06:41 schreef Alexander Graf: The trick with the RPi image really is to synchronize GPT and MBR into a working hybrid GPT setup, just like on Apple Macs

Re: [opensuse-arm] How to resize 13.2 Raspberry Pi image

2014-11-26 Thread Freek de Kruijf
, booting that SD for the first time may give you a headless working system. I tried that without gptsync and that did not work. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Problem with freshclam and clamd and ntp

2014-11-28 Thread Freek de Kruijf
Op woensdag 26 november 2014 12:08:53 schreef Freek de Kruijf: I am trying to set up a mail server on my RPi and need freshclam and clamd. A problem seems to be that they start before ntp has properly set the date and time. I tried adding in the files /usr/lib/systemd/system

Re: [opensuse-arm] Problem with freshclam and clamd and ntp

2014-11-28 Thread Freek de Kruijf
Op vrijdag 28 november 2014 12:35:05 schreef Freek de Kruijf: Op woensdag 26 november 2014 12:08:53 schreef Freek de Kruijf: I am trying to set up a mail server on my RPi and need freshclam and clamd. A problem seems to be that they start before ntp has properly set the date and time

Re: [opensuse-arm] Kernel-default for 13.2

2014-12-05 Thread Freek de Kruijf
://download.opensuse.org/ports/armv6hl/distribution/13.2/repo/oss/ -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] New version clamav for Raspberry Pi

2014-12-05 Thread Freek de Kruijf
openSUSE 13.2 has an updated version for clamav. I don't see that version yet in the repositories for the Raspberry Pi. Is there anything I can do to fix that? Should this new version end up the oss repository or in update? -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm

Re: [opensuse-arm] New version clamav for Raspberry Pi

2014-12-08 Thread Freek de Kruijf
Op maandag 8 december 2014 13:01:07 schreef Andreas Schwab: Alexander Graf ag...@suse.de writes: On 05.12.14 23:34, Freek de Kruijf wrote: openSUSE 13.2 has an updated version for clamav. I don't see that version yet in the repositories for the Raspberry Pi. Is there anything I can do

Re: [opensuse-arm] New version clamav for Raspberry Pi

2014-12-09 Thread Freek de Kruijf
Op dinsdag 9 december 2014 09:55:43 schreef Adrian Schröter: On Dienstag, 9. Dezember 2014, 00:50:24 wrote Freek de Kruijf: Op maandag 8 december 2014 13:01:07 schreef Andreas Schwab: Alexander Graf ag...@suse.de writes: On 05.12.14 23:34, Freek de Kruijf wrote: openSUSE 13.2 has

Re: [opensuse-arm] Which repo for rasperry pi

2014-12-15 Thread Freek de Kruijf
there. Ciao, Michael. See http://lists.opensuse.org/opensuse-arm/2014-12/msg00027.html for an answer. I don't know how to change that policy or have an alternative. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e

Re: [opensuse-arm] WHICH IMAGE?

2014-12-18 Thread Freek de Kruijf
http://download.opensuse.org/ports/armv6hl/factory/images/? Andreas. Also see https://en.opensuse.org/HCL:Raspberry_Pi -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] WHICH IMAGE?

2014-12-18 Thread Freek de Kruijf
http://download.opensuse.org/ports/armv6hl/factory/images/? There is an E17 file with .raw.xz extension that I know how to put on an SD card, but how to handle the .tbz files? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact

Re: [opensuse-arm] raw.xy-File

2014-12-23 Thread Freek de Kruijf
://en.opensuse.org/HCL:Raspberry_Pi -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] raw.xy-File

2014-12-26 Thread Freek de Kruijf
Op vrijdag 26 december 2014 08:43:54 schreef Edgar Dombrowski: Am 23.12.2014 10:38, schrieb Freek de Kruijf: Op dinsdag 23 december 2014 08:13:07 schreef Edgar Dombrowski: OS for Raspbi-Pi Hi Raspi-Friends. Thanks first to Alex and others for telling me not to use the Build.tbz

[opensuse-arm] Why is packet e2fsprogs not present in Rasberry Pi image?

2015-02-17 Thread Freek de Kruijf
de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Wrong type of connection between Rasberry Pi and Zyxel P-2812HNU-F1?

2015-02-17 Thread Freek de Kruijf
Op dinsdag 17 februari 2015 13:39:56 schreef u: Le 17/02/2015 11:50, Freek de Kruijf a écrit : Is there another way to establish a proper connection? Is there a command to make the Ethernet interface in the RPi the slave and to start a new negotiation? Maybe just a matter of DHCP

Re: [opensuse-arm] Why is packet e2fsprogs not present in Rasberry Pi image?

2015-02-17 Thread Freek de Kruijf
Op dinsdag 17 februari 2015 13:38:01 schreef Guillaume Gardet: Le 17/02/2015 11:36, Freek de Kruijf a écrit : Hi all, Reading through the dmesg output on my Raspberry Pi I found an error message about missing programs fsck.ext3 and fsck.ext4, which I found in package e2fsprogs

[opensuse-arm] Trying to build the newest version of clamav in OBS for Raspberry Pi 1 B

2015-03-21 Thread Freek de Kruijf
project which shows a build for armv6l, however with an old tar file. However after that the armv6l architecture is no longer available. Any hints on how to proceeed? -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse

[opensuse-arm] How to use Rapsberry Pi Factory image headless

2015-03-14 Thread Freek de Kruijf
/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail

Re: [opensuse-arm] openSUSE ARM img compatible with Raspberry Pi 2

2015-03-30 Thread Freek de Kruijf
tried that image headless on my Raspberry Pi 2B, but it I do not get a working Ethernet connection. After the first boot and waiting about 15 minutes, there is nothing in /var/log/journal. Do I need to have a display and keyboard connected? -- fr.gr. member openSUSE Freek de Kruijf

Re: [opensuse-arm] openSUSE ARM img compatible with Raspberry Pi 2

2015-03-30 Thread Freek de Kruijf
the 1GB RAM, 4 CPUs and eth0 which is in dhcp wait, so it doesn't look too bad. I used the one without a build number, which did not work. However the 285 did work and I could ssh into that system and configure things. Will continue tomorrow. Thanks!!! -- fr.gr. member openSUSE Freek de Kruijf

Re: [opensuse-arm] openSUSE ARM img compatible with Raspberry Pi 2

2015-03-31 Thread Freek de Kruijf
Op dinsdag 31 maart 2015 01:09:48 schreef Freek de Kruijf: Op maandag 30 maart 2015 23:27:19 schreef Dirk Müller: Hi Freek, Please try again (Build 285 or newer). I've not been able to test ethernet yet as I don't have ethernet while having time for hacking the device, but it boots up

Re: [opensuse-arm] openSUSE ARM img compatible with Raspberry Pi 2

2015-04-01 Thread Freek de Kruijf
the file boot.script and found in the value for bootargs the parameter disk=/dev/disk/by-id/mmc-0_0x1537043d . I have the feeling there should be -part? appended, where ? should be 2 or 3. Both root= and resume= have -part3. respectively -part4 appended. -- fr.gr. member openSUSE Freek de Kruijf

Re: [opensuse-arm] openSUSE ARM img compatible with Raspberry Pi 2

2015-03-31 Thread Freek de Kruijf
Op dinsdag 31 maart 2015 15:12:53 schreef Freek de Kruijf: Op dinsdag 31 maart 2015 01:09:48 schreef Freek de Kruijf: Op maandag 30 maart 2015 23:27:19 schreef Dirk Müller: Hi Freek, Please try again (Build 285 or newer). I've not been able to test ethernet yet as I don't have ethernet

[opensuse-arm] armv6l is missing on repository openSUSE-13.2-repo-update

2015-03-29 Thread Freek de Kruijf
When running zypper up on my Raspberry Pi I get a warning about an obsolete repository openSUSE-13.2-repo-update. Looking at http://download.opensuse.org/ports/update/13.2/ I do not see anything about armv6l I wonder why? -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm

[opensuse-arm] Wi-Fi connections on Raspberry Pi 1 B

2015-02-25 Thread Freek de Kruijf
is supported in openSUSE 13.2 for the the Raspberry Pi. Any information? -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Error message after installation of kernel-firmware

2015-02-22 Thread Freek de Kruijf
Hi all, I got the following error message after the update of firmware-kernel in openSUSE 13.2 for Raspberry Pi. Warning: kernel-firmware-20141122git-5.1.noarch.rpm %posttrans script failed (returned 1) Bug report? -- fr.gr. Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm

Re: [opensuse-arm] Error message after installation of kernel-firmware

2015-02-22 Thread Freek de Kruijf
Op zondag 22 februari 2015 18:15:59 schreef Andreas Färber: Hi, Am 22.02.2015 um 18:05 schrieb Freek de Kruijf: I got the following error message after the update of firmware-kernel in openSUSE 13.2 for Raspberry Pi. Warning: kernel-firmware-20141122git-5.1.noarch.rpm %posttrans

Re: [opensuse-arm] Wi-Fi connections on Raspberry Pi 1 B

2015-02-26 Thread Freek de Kruijf
Op donderdag 26 februari 2015 10:44:17 schreef Andreas Färber: Am 26.02.2015 um 10:12 schrieb Freek de Kruijf: Op woensdag 25 februari 2015 23:33:31 schreef Andreas Färber: Am 25.02.2015 um 22:11 schrieb Freek de Kruijf: I have a strange problem with Wi-Fi connections to two somewhat

Re: [opensuse-arm] How to use Rapsberry Pi Factory image headless

2015-04-22 Thread Freek de Kruijf
Op zaterdag 14 maart 2015 14:13:56 schreef Alex Armstrong: Freek de Kruijf wrote: I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Ra spberryPi:/upstream/images/ on a headless

Re: [opensuse-arm] Some problems with Tumbleweed on Raspberry Pi B 1

2015-05-01 Thread Freek de Kruijf
. There is no error message in the logs. It was stable with openSUSE 13.1, but I lost that image, so I have to work with the newest software. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow

[opensuse-arm] Some problems with Tumbleweed on Raspberry Pi B 1

2015-05-01 Thread Freek de Kruijf
: line 1585: host_modules: bad array subscript -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Some problems with Tumbleweed on Raspberry Pi B 1

2015-05-01 Thread Freek de Kruijf
: add_drivers+=sdhci_bcm2835 bcm2835_dma to: add_drivers+= sdhci_bcm2835 bcm2835_dma (e.g. there is now an extra space betweeen += and sdhci..) Greetings, Dirk OK, thanks, will wait a little longer. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr

[opensuse-arm] Problem updating Tumbleweed on Raspberry Pi 1B

2015-05-13 Thread Freek de Kruijf
crash. I was able to download the rpm using curl. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Updating RPi 2B image to kernel 4.0.1 leaves non-bootable system

2015-05-17 Thread Freek de Kruijf
I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using zypper I updated the kernel, but after that the system was no longer bootable. The newest image still has a 3.19 kernel. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr

Re: [opensuse-arm] yast error when reading network device configuration

2015-05-17 Thread Freek de Kruijf
openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Fwd: raspberry PI 2

2015-05-19 Thread Freek de Kruijf
openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Problem updating Tumbleweed on Raspberry Pi 1B

2015-05-13 Thread Freek de Kruijf
Op woensdag 13 mei 2015 22:42:27 schreef Freek de Kruijf: I tried to update a Tumbleweed system on a Raspberry Pi 1B system using zypper up. During downloading the kernel-default rpm the system crashes and restarts. I was able to update zypper and curl to the latest versions. However

Re: [opensuse-arm] openSUSE ARM img compatible with Raspberry Pi 2

2015-04-03 Thread Freek de Kruijf
there would be some feature in kiwi to do that :-/ Indeed this works. I now have a bootable RPi2 system. Thanks very much!!! -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Updating RPi 2B image to kernel 4.0.1 leaves non-bootable system

2015-05-19 Thread Freek de Kruijf
Op dinsdag 19 mei 2015 16:51:03 schreef Andreas Färber: Am 18.05.2015 um 00:51 schrieb Freek de Kruijf: I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using zypper I updated the kernel, but after that the system was no longer bootable. The newest image still

Re: [opensuse-arm] RaspberryPi and openSuse 13.2

2015-05-20 Thread Freek de Kruijf
On the next boot the MAC will have that value. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Updating RPi 2B image to kernel 4.0.1 leaves non-bootable system

2015-05-19 Thread Freek de Kruijf
Op dinsdag 19 mei 2015 18:07:19 schreef Alexander Graf: On 05/19/2015 06:02 PM, Freek de Kruijf wrote: So maybe this kernel should not be available in the repo? It's part of the official Factory:ARM repository, because all upstream (non-contrib) boards use it. So this kernel conflicts

Re: [opensuse-arm] Updating RPi 2B image to kernel 4.0.1 leaves non-bootable system

2015-05-19 Thread Freek de Kruijf
Op dinsdag 19 mei 2015 17:02:24 schreef Alexander Graf: On 05/19/2015 04:58 PM, Freek de Kruijf wrote: Op dinsdag 19 mei 2015 16:51:03 schreef Andreas Färber: Am 18.05.2015 um 00:51 schrieb Freek de Kruijf: I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using

Re: [opensuse-arm] Raspberry Pi 1 and GPT partition really booting?

2015-06-08 Thread Freek de Kruijf
libstorage-ruby is for Ruby 2.1 where yast needs 2.2. I succeeded in generating this library for both systems. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Difference between Release supported platforms and Community supported platforms

2015-06-09 Thread Freek de Kruijf
Tumbleweed or also 13.2 and ...? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Problem using YaST because rebuild of ruby packet is blocked by boost library

2015-06-06 Thread Freek de Kruijf
it. This can only be done next week, sorry about that. :-/ I tried to find the project on build.opensuse.org that builds libstorage-ruby, but could not find it. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail

Re: [opensuse-arm] I am lost

2015-06-10 Thread Freek de Kruijf
YaST. The package libstorage-ruby needs an update, which is worked on. And for RPi2 at: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi2/images/ This one has the updated libstorage-ruby. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail

[opensuse-arm] RPi1 crashes during downloading phase of zypper up

2015-06-10 Thread Freek de Kruijf
and restarts. I did not experience such a problem in earlier updates using an Ethernet connection. How can I investigate such a problem? Retrying the whole process gives the crash at another point. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr

Re: [opensuse-arm] I am lost

2015-06-10 Thread Freek de Kruijf
systems installed, and are supposed to work using a display and keyboard connected I suppose. JeOS is a more basic system. I use it headless, without display and keyboard, as a server. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org

[opensuse-arm] Signing key for repository 'Factory-Contrib-RPi' expires

2015-06-10 Thread Freek de Kruijf
in 9 days) Rpm Name: gpg-pubkey-3f546f34-51655169 -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Problem using YaST because rebuild of ruby packet is blocked by boost library

2015-06-04 Thread Freek de Kruijf
. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Experiences with Build325.3 for RPi1 and Build315.2 for RPi2

2015-06-23 Thread Freek de Kruijf
in config.txt on the UEFI partition could solve this problem. I tried 16 and 24. It does not seem to have any effect, except when setting these values to 20, in which case the I get a distorted display. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr

Re: [opensuse-arm] Experience with Build315.3 for RPi2

2015-06-25 Thread Freek de Kruijf
Op dinsdag 23 juni 2015 18:40:50 schreef Freek de Kruijf: Both have the same problem starting slow. This was about Build325.3 for RPi1 and Build315.2 for RPi2. Today I found Build315.3 for RPi2. The slow start has gone. The RPi2 system does not work. On my TV screen I see that the kernel

[opensuse-arm] Newest images for RPi1 and RPi2 are not usable headless

2015-06-18 Thread Freek de Kruijf
I tried Tumbleweed Build325.1 for RPi1 and Build314.1 for RPi2 in a headless situation, but both do do not end with an active Ethernet connection. Is this to be expected? u-boot problem? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr

Re: [opensuse-arm] Factory RPi2 image - no console on HDMI after first reboot

2015-06-12 Thread Freek de Kruijf
. What do you mean by HDMI console. Did you connect a USB keyboard and a HDMI monitor? Are the characters you type on the keyboard displayed in the monitor? You can't expect more than that with JeOS. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr

Re: [opensuse-arm] R:R:I am Lost: No Boot

2015-06-17 Thread Freek de Kruijf
initially. So it may take longer if you have a larger SD card. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Experiences with Build326.2 for RPi1 and Build316.1 for RPi2

2015-07-01 Thread Freek de Kruijf
image crashes. Inspecting the micro-SD card after this process shows no changes in the partitioning of this card. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Experiences with Build325.4 for RPi1

2015-06-30 Thread Freek de Kruijf
. I build these modules, which went OK. I noticed gcc5 was used. I will continue with this build to configure the applications I use. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow

Re: [opensuse-arm] Experiences with Build325.4 for RPi1

2015-07-02 Thread Freek de Kruijf
Op woensdag 1 juli 2015 13:53:47 schreef Alexander Graf: On 30.06.15 17:43, Freek de Kruijf wrote: Op dinsdag 30 juni 2015 11:49:09 schreef u: On 06/30/15 11:24, Freek de Kruijf wrote: Op dinsdag 30 juni 2015 10:57:31 schreef Alexander Graf: On 06/30/15 10:55, Freek de Kruijf wrote

[opensuse-arm] Experiences with Build317.3 for RPi2

2015-07-05 Thread Freek de Kruijf
Still the same problem as before. The system boots the openSUSE kernel, which apparently crashes. After which it boots again. The partitioning of the SD card does not seem to changed. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org

[opensuse-arm] Build326.4 for RPi1 does not produce a proper ext4 partition

2015-07-03 Thread Freek de Kruijf
I copied this image to my SD card and tried to mount the ext4 partition. Using parted showed that it it was not a proper ext4 partition. Did not know how to make it right without destroying the content. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm

Re: [opensuse-arm] Strange problem with Wi-Fi connection

2015-08-12 Thread Freek de Kruijf
Op woensdag 12 augustus 2015 11:48:23 schreef Michael Ströder: Freek de Kruijf wrote: Op woensdag 12 augustus 2015 10:02:12 schreef u: I had a similar issue which was solved in the meantime after update package dtb-bcm2835-4.1.3-47.1 reached this system. Now kernel update to 4.1.4

[opensuse-arm] Tests with latest Raspberry Pi images

2015-08-22 Thread Freek de Kruijf
I tested a number of images from both Contrib:/RaspberryPi:/upstream as Contrib:/RaspberryPi/. From the last one I never got a working image, from upstream the last one that works is Build330.10 from Aug 6. All images for Raspberry Pi 2B are usable. -- fr.gr. member openSUSE Freek de Kruijf

Re: [opensuse-arm] Experiences with Build325.4 for RPi1

2015-06-30 Thread Freek de Kruijf
Op dinsdag 30 juni 2015 11:49:09 schreef u: On 06/30/15 11:24, Freek de Kruijf wrote: Op dinsdag 30 juni 2015 10:57:31 schreef Alexander Graf: On 06/30/15 10:55, Freek de Kruijf wrote: Earlier a second boot of a system generated with this build for Raspberry Pi 1B did not work. Now I

Re: [opensuse-arm] Experiences with Build325.4 for RPi1

2015-06-30 Thread Freek de Kruijf
Op dinsdag 30 juni 2015 11:49:09 schreef Alexander Graf: On 06/30/15 11:24, Freek de Kruijf wrote: Op dinsdag 30 juni 2015 10:57:31 schreef Alexander Graf: On 06/30/15 10:55, Freek de Kruijf wrote: Earlier a second boot of a system generated with this build for Raspberry Pi 1B did

Re: [opensuse-arm] Cubietruck 13.2 regression

2015-08-05 Thread Freek de Kruijf
either. You may find /dev/tty10 or /dev/xconsole in /etc/rsyslog.conf Changing /dev/tty10 in /dev/tty1 may get your kernel messages logged on your screen. It did for me on a Raspberry Pi 2B. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr

[opensuse-arm] Raspberry Pi 1 and 2 images from of Aug 6

2015-08-11 Thread Freek de Kruijf
not give me a clue why yast lan crashes on the RPi1 and is OK on the RPI2. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Some tests with RPi 1 images

2015-08-06 Thread Freek de Kruijf
appears usable. I tested Build330.8 in upstream /repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi:/ which boots, but shows an error about /home and finally reboots again after a wait time of 120 sec., so does not work. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail

Re: [opensuse-arm] Re: Raspberry Pi 1 and 2 images from of Aug 6

2015-08-14 Thread Freek de Kruijf
it is building. Will see what becomes of it. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Strange problem with Wi-Fi connection

2015-08-12 Thread Freek de Kruijf
Op woensdag 12 augustus 2015 10:02:12 schreef u: Freek de Kruijf wrote: I have a RPi 1B with a Wi-Fi USB interface using the latest image for this system. Which image exactly? Build331.1 I had a similar issue which was solved in the meantime after update package dtb-bcm2835-4.1.3-47.1

Re: [opensuse-arm] Re: Raspberry Pi 1 and 2 images from of Aug 6

2015-08-12 Thread Freek de Kruijf
Op dinsdag 11 augustus 2015 23:06:20 schreef Matwey V. Kornilov: 11.08.2015 22:02, Freek de Kruijf пишет: This does not give me a clue why yast lan crashes on the RPi1 and is OK on the RPI2. AFAIK, RPi1 is armv6 and RPi2 is armv7. So, there could be a number of reasons to crash on one

Re: [opensuse-arm] Some tests with RPi 1 images

2015-08-06 Thread Freek de Kruijf
Op donderdag 6 augustus 2015 14:43:35 schreef Freek de Kruijf: I tested Build319.9 in /repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi/ This image shows an error message about not finding the boot device and reboots again after 120 sec., etc. So there is something wrong

[opensuse-arm] Tests with RPi2 images

2015-08-06 Thread Freek de Kruijf
Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] What repository is recommended for images for Raspberry Pi's?

2015-07-20 Thread Freek de Kruijf
:/RaspberryPi/images/ for RPi2: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi2:/Staging/images/ http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi2/images/ -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail

Re: [opensuse-arm] What repository is recommended for images for Raspberry Pi's?

2015-07-20 Thread Freek de Kruijf
Op vrijdag 17 juli 2015 20:18:22 schreef Freek de Kruijf: I am a bit confused about which repositories should be used for Raspberry Pi Tumbleweed images. Currently I have: for RPi1: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp berryPi:/upstream/images/ None

Re: [opensuse-arm] Build327.8 for rpi1 broken

2015-07-15 Thread Freek de Kruijf
-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build327.6 seems to work. Could someone look at the difference(s)? Ciao, Michael. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Re: [opensuse-factory] Suse and Raspberry Pi Build

2015-10-28 Thread Freek de Kruijf
M > forum? There is a special ARM mailing list: opensuse-arm@opensuse.org Subscribe via: opensuse-arm+subscr...@opensuse.org -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Raspberry Pi 2

2015-10-14 Thread Freek de Kruijf
e wrong? Any other image I should try? You could try the JeOS. Previous versions did work, and install afterward XFCE. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] openSUSE on Raspberry B+/2 usable as a server?

2015-10-16 Thread Freek de Kruijf
anks in advance for your input! > > Johannes -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

[opensuse-arm] Tests of latest images for RPi1

2015-09-01 Thread Freek de Kruijf
the command "yast lan" is solved. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] How to upgrade kernel on Raspberry Pi

2015-09-04 Thread Freek de Kruijf
does not include the copy to /boot. The /boot on my RPi is on the second partition (ext3). -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Tests of latest images for RPi1

2015-09-03 Thread Freek de Kruijf
Op dinsdag 1 september 2015 22:31:43 schreef Freek de Kruijf: > Build336.2 from > repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi:/upstream/ boots, the > SD is partitioned and the resulting system boots. However the Ethernet > connection does not become active. The lights stay

Re: [opensuse-arm] How to upgrade kernel on Raspberry Pi

2015-09-06 Thread Freek de Kruijf
etooth device and/or Wi-Fi. When I have a few % packet loss, because of the distance on the Wi-Fi connection, curl does not deliver me a proper file. Curl is used by zypper and zypper shows wrong check sums. curl does not report an error, but the check sum is wrong. -- fr.gr. member openSUSE Fre

  1   2   3   4   >