Re: [opensuse-arm] Initrd.vmx too big

2018-02-07 Thread Guillaume Gardet 



Le 05/02/2018 à 13:37, Guillaume Gardet a écrit :



Le 05/02/2018 à 13:01, Alexander Graf a écrit :


On 05.02.18 11:49, Alexander Graf wrote:


On 02.02.18 18:21, Alexander Graf wrote:



Am 02.02.2018 um 14:08 schrieb Guillaume Gardet :




Le 23/01/2018 à 16:59, Alexander Graf a écrit :
Howdy,


On 01/23/2018 04:20 PM, Guillaume Gardet wrote:
Hi,

I just tested the latest Tumbleweed image for my Beagleboard xM and the boot 
fails because the initrd is too big (209M uncompressed) for the RAM.

I'm seeing that pattern slowly emerge across the board. I guess it's about time 
we start to drop the legacy kiwi initrd. Can you try and see if

#define USE_DRACUT_FIRSTBOOT

in Images.kiwi.in works for you? That should also drastically reduce the initrd 
size.

Build fails because jing was not preinstalled. Once preinstalled, I get an 
error about initrd_system and efipartsize attributes not allowed:
**
  EXEC [/usr/bin/jing /usr/share/kiwi/modules/KIWISchema.rng 
/usr/src/packages/SOURCES/config.converted.xml 2>/dev/null]
[  246s] Feb-02 11:02:02 <3> : /usr/src/packages/SOURCES/config.converted.xml:21:462: error: attribute "initrd_system" not allowed here; expected attribute "bootfilesystem", "bootloader", "bootpartition", "bootpartsize", "bootprofile", "boottimeout", "btrfs_root_is_snapshot", "checkprebuilt", "compressed", "container", "devicepersistency", "editbootconfig", "editbootinstall", 
"filesystem", "firmware", "flags", "format", "formatoptions", "fsmountoptions", "fsnocheck", "fsreadonly", "fsreadwrite", "gcelicense", "hybrid", "hybridpersistent", "hybridpersistent_filesystem", "installboot", "installiso", "installprovidefailsafe", "installpxe", "installstick", "kernelcmdline", "luks", "luksOS", 
"mdraid", "primary", "ramonly", "target_blocksize", "vga", "vhdfixedtag", "volid", "wwid_wait_timeout", "zfsoptions" or "zipl_targettype"
[  246s] /usr/src/packages/SOURCES/config.converted.xml:21:462: error: attribute "efipartsize" not allowed here; expected attribute "bootfilesystem", "bootpartition", "bootpartsize", "bootprofile", "boottimeout", "btrfs_root_is_snapshot", "checkprebuilt", "compressed", "container", "devicepersistency", "editbootconfig", "editbootinstall", "flags", 
"format", "formatoptions", "fsnocheck", "fsreadonly", "fsreadwrite", "gcelicense", "hybrid", "hybridpersistent", "hybridpersistent_filesystem", "installboot", "installiso", "installprovidefailsafe", "installpxe", "installstick", "kernelcmdline", "luks", "luksOS", "mdraid", "primary", 
"ramonly", "target_blocksize", "vga", "vhdfixedtag", "volid", "wwid_wait_timeout", "zfsoptions" or "zipl_targettype"
[  246s]
[  246s] Feb-02 11:02:02 <3> : KIWI exited with error(s)
**

Am I missing something?

Let‘s ask Marcus :)

I had a quick chat with him and he showed me a few other points where
our xml description is doing useless things.

However, during that discussion I realized we're not using kiwi-ng, but
instead rely on the old code. That's also why you don't get the dracut
initrd pieces to work.

To build with kiwi-ng, you'll have to modify your prjconf to pull in the
right package. Check out the o:F:A one and just do the reverse in your
project's :)

I've created a small test repo where I've enabled the dracut initrd for
rpi3: https://build.opensuse.org/project/show/home:algraf:arm-kiwi-ng


You need to add this line in your Project config:
    Preinstall: jing
Because kiwi does not install this dep automatically.


Alex, your Project config has a typo:
    Prefer: kiwi-boot-require
should be:
    Prefer: kiwi-boot-requires
with a 's' at the end. ;)

Guillaume






Let's see how that works out ...

Once that's ok, I guess we can switch to kiwi8 in o:F:A and then start
moving beagle to the dracut initrd.

Sounds good.

Guillaume



--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Initrd.vmx too big

2018-02-05 Thread Alexander Graf 


On 05.02.18 11:49, Alexander Graf wrote:
> 
> 
> On 02.02.18 18:21, Alexander Graf wrote:
>>
>>
>>> Am 02.02.2018 um 14:08 schrieb Guillaume Gardet :
>>>
>>>
>>>
 Le 23/01/2018 à 16:59, Alexander Graf a écrit :
 Howdy,

> On 01/23/2018 04:20 PM, Guillaume Gardet wrote:
> Hi,
>
> I just tested the latest Tumbleweed image for my Beagleboard xM and the 
> boot fails because the initrd is too big (209M uncompressed) for the RAM.

 I'm seeing that pattern slowly emerge across the board. I guess it's about 
 time we start to drop the legacy kiwi initrd. Can you try and see if

 #define USE_DRACUT_FIRSTBOOT

 in Images.kiwi.in works for you? That should also drastically reduce the 
 initrd size.
>>>
>>> Build fails because jing was not preinstalled. Once preinstalled, I get an 
>>> error about initrd_system and efipartsize attributes not allowed:
>>> **
>>>  EXEC [/usr/bin/jing /usr/share/kiwi/modules/KIWISchema.rng 
>>> /usr/src/packages/SOURCES/config.converted.xml 2>/dev/null]
>>> [  246s] Feb-02 11:02:02 <3> : 
>>> /usr/src/packages/SOURCES/config.converted.xml:21:462: error: attribute 
>>> "initrd_system" not allowed here; expected attribute "bootfilesystem", 
>>> "bootloader", "bootpartition", "bootpartsize", "bootprofile", 
>>> "boottimeout", "btrfs_root_is_snapshot", "checkprebuilt", "compressed", 
>>> "container", "devicepersistency", "editbootconfig", "editbootinstall", 
>>> "filesystem", "firmware", "flags", "format", "formatoptions", 
>>> "fsmountoptions", "fsnocheck", "fsreadonly", "fsreadwrite", "gcelicense", 
>>> "hybrid", "hybridpersistent", "hybridpersistent_filesystem", "installboot", 
>>> "installiso", "installprovidefailsafe", "installpxe", "installstick", 
>>> "kernelcmdline", "luks", "luksOS", "mdraid", "primary", "ramonly", 
>>> "target_blocksize", "vga", "vhdfixedtag", "volid", "wwid_wait_timeout", 
>>> "zfsoptions" or "zipl_targettype"
>>> [  246s] /usr/src/packages/SOURCES/config.converted.xml:21:462: error: 
>>> attribute "efipartsize" not allowed here; expected attribute 
>>> "bootfilesystem", "bootpartition", "bootpartsize", "bootprofile", 
>>> "boottimeout", "btrfs_root_is_snapshot", "checkprebuilt", "compressed", 
>>> "container", "devicepersistency", "editbootconfig", "editbootinstall", 
>>> "flags", "format", "formatoptions", "fsnocheck", "fsreadonly", 
>>> "fsreadwrite", "gcelicense", "hybrid", "hybridpersistent", 
>>> "hybridpersistent_filesystem", "installboot", "installiso", 
>>> "installprovidefailsafe", "installpxe", "installstick", "kernelcmdline", 
>>> "luks", "luksOS", "mdraid", "primary", "ramonly", "target_blocksize", 
>>> "vga", "vhdfixedtag", "volid", "wwid_wait_timeout", "zfsoptions" or 
>>> "zipl_targettype"
>>> [  246s]
>>> [  246s] Feb-02 11:02:02 <3> : KIWI exited with error(s)
>>> **
>>>
>>> Am I missing something?
>>
>> Let‘s ask Marcus :)
> 
> I had a quick chat with him and he showed me a few other points where
> our xml description is doing useless things.
> 
> However, during that discussion I realized we're not using kiwi-ng, but
> instead rely on the old code. That's also why you don't get the dracut
> initrd pieces to work.
> 
> To build with kiwi-ng, you'll have to modify your prjconf to pull in the
> right package. Check out the o:F:A one and just do the reverse in your
> project's :)

I've created a small test repo where I've enabled the dracut initrd for
rpi3: https://build.opensuse.org/project/show/home:algraf:arm-kiwi-ng

Let's see how that works out ...

Once that's ok, I guess we can switch to kiwi8 in o:F:A and then start
moving beagle to the dracut initrd.


Alex
-- 
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Initrd.vmx too big

2018-02-02 Thread Alexander Graf 


> Am 02.02.2018 um 14:08 schrieb Guillaume Gardet :
> 
> 
> 
>> Le 23/01/2018 à 16:59, Alexander Graf a écrit :
>> Howdy,
>> 
>>> On 01/23/2018 04:20 PM, Guillaume Gardet wrote:
>>> Hi,
>>> 
>>> I just tested the latest Tumbleweed image for my Beagleboard xM and the 
>>> boot fails because the initrd is too big (209M uncompressed) for the RAM.
>> 
>> I'm seeing that pattern slowly emerge across the board. I guess it's about 
>> time we start to drop the legacy kiwi initrd. Can you try and see if
>> 
>> #define USE_DRACUT_FIRSTBOOT
>> 
>> in Images.kiwi.in works for you? That should also drastically reduce the 
>> initrd size.
> 
> Build fails because jing was not preinstalled. Once preinstalled, I get an 
> error about initrd_system and efipartsize attributes not allowed:
> **
>  EXEC [/usr/bin/jing /usr/share/kiwi/modules/KIWISchema.rng 
> /usr/src/packages/SOURCES/config.converted.xml 2>/dev/null]
> [  246s] Feb-02 11:02:02 <3> : 
> /usr/src/packages/SOURCES/config.converted.xml:21:462: error: attribute 
> "initrd_system" not allowed here; expected attribute "bootfilesystem", 
> "bootloader", "bootpartition", "bootpartsize", "bootprofile", "boottimeout", 
> "btrfs_root_is_snapshot", "checkprebuilt", "compressed", "container", 
> "devicepersistency", "editbootconfig", "editbootinstall", "filesystem", 
> "firmware", "flags", "format", "formatoptions", "fsmountoptions", 
> "fsnocheck", "fsreadonly", "fsreadwrite", "gcelicense", "hybrid", 
> "hybridpersistent", "hybridpersistent_filesystem", "installboot", 
> "installiso", "installprovidefailsafe", "installpxe", "installstick", 
> "kernelcmdline", "luks", "luksOS", "mdraid", "primary", "ramonly", 
> "target_blocksize", "vga", "vhdfixedtag", "volid", "wwid_wait_timeout", 
> "zfsoptions" or "zipl_targettype"
> [  246s] /usr/src/packages/SOURCES/config.converted.xml:21:462: error: 
> attribute "efipartsize" not allowed here; expected attribute 
> "bootfilesystem", "bootpartition", "bootpartsize", "bootprofile", 
> "boottimeout", "btrfs_root_is_snapshot", "checkprebuilt", "compressed", 
> "container", "devicepersistency", "editbootconfig", "editbootinstall", 
> "flags", "format", "formatoptions", "fsnocheck", "fsreadonly", "fsreadwrite", 
> "gcelicense", "hybrid", "hybridpersistent", "hybridpersistent_filesystem", 
> "installboot", "installiso", "installprovidefailsafe", "installpxe", 
> "installstick", "kernelcmdline", "luks", "luksOS", "mdraid", "primary", 
> "ramonly", "target_blocksize", "vga", "vhdfixedtag", "volid", 
> "wwid_wait_timeout", "zfsoptions" or "zipl_targettype"
> [  246s]
> [  246s] Feb-02 11:02:02 <3> : KIWI exited with error(s)
> **
> 
> Am I missing something?

Let‘s ask Marcus :)

Alex

> 
> Guillaume
> 

--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Initrd.vmx too big

2018-02-02 Thread Guillaume Gardet 



Le 23/01/2018 à 16:59, Alexander Graf a écrit :

Howdy,

On 01/23/2018 04:20 PM, Guillaume Gardet wrote:

Hi,

I just tested the latest Tumbleweed image for my Beagleboard xM and the boot 
fails because the initrd is too big (209M uncompressed) for the RAM.


I'm seeing that pattern slowly emerge across the board. I guess it's about time 
we start to drop the legacy kiwi initrd. Can you try and see if

#define USE_DRACUT_FIRSTBOOT

in Images.kiwi.in works for you? That should also drastically reduce the initrd 
size.


Build fails because jing was not preinstalled. Once preinstalled, I get an 
error about initrd_system and efipartsize attributes not allowed:
**
 EXEC [/usr/bin/jing /usr/share/kiwi/modules/KIWISchema.rng 
/usr/src/packages/SOURCES/config.converted.xml 2>/dev/null]
[  246s] Feb-02 11:02:02 <3> : /usr/src/packages/SOURCES/config.converted.xml:21:462: error: attribute "initrd_system" not allowed here; expected attribute "bootfilesystem", "bootloader", "bootpartition", "bootpartsize", "bootprofile", "boottimeout", "btrfs_root_is_snapshot", "checkprebuilt", "compressed", "container", "devicepersistency", "editbootconfig", "editbootinstall", 
"filesystem", "firmware", "flags", "format", "formatoptions", "fsmountoptions", "fsnocheck", "fsreadonly", "fsreadwrite", "gcelicense", "hybrid", "hybridpersistent", "hybridpersistent_filesystem", "installboot", "installiso", "installprovidefailsafe", "installpxe", "installstick", "kernelcmdline", "luks", "luksOS", 
"mdraid", "primary", "ramonly", "target_blocksize", "vga", "vhdfixedtag", "volid", "wwid_wait_timeout", "zfsoptions" or "zipl_targettype"
[  246s] /usr/src/packages/SOURCES/config.converted.xml:21:462: error: attribute "efipartsize" not allowed here; expected attribute "bootfilesystem", "bootpartition", "bootpartsize", "bootprofile", "boottimeout", "btrfs_root_is_snapshot", "checkprebuilt", "compressed", "container", "devicepersistency", "editbootconfig", "editbootinstall", "flags", 
"format", "formatoptions", "fsnocheck", "fsreadonly", "fsreadwrite", "gcelicense", "hybrid", "hybridpersistent", "hybridpersistent_filesystem", "installboot", "installiso", "installprovidefailsafe", "installpxe", "installstick", "kernelcmdline", "luks", "luksOS", "mdraid", "primary", 
"ramonly", "target_blocksize", "vga", "vhdfixedtag", "volid", "wwid_wait_timeout", "zfsoptions" or "zipl_targettype"
[  246s]
[  246s] Feb-02 11:02:02 <3> : KIWI exited with error(s)
**

Am I missing something?

Guillaume

--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Initrd.vmx too big

2018-01-24 Thread Guillaume Gardet 



Le 23/01/2018 à 16:59, Alexander Graf a écrit :

Howdy,

On 01/23/2018 04:20 PM, Guillaume Gardet wrote:

Hi,

I just tested the latest Tumbleweed image for my Beagleboard xM and the boot 
fails because the initrd is too big (209M uncompressed) for the RAM.


I'm seeing that pattern slowly emerge across the board. I guess it's about time 
we start to drop the legacy kiwi initrd. Can you try and see if

#define USE_DRACUT_FIRSTBOOT

in Images.kiwi.in works for you? That should also drastically reduce the initrd 
size.


I will give it a try but JeOS* images are currently unresolvable.

Guillaume




Alex



--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] Initrd.vmx too big

2018-01-23 Thread Alexander Graf 

Howdy,

On 01/23/2018 04:20 PM, Guillaume Gardet wrote:

Hi,

I just tested the latest Tumbleweed image for my Beagleboard xM and 
the boot fails because the initrd is too big (209M uncompressed) for 
the RAM.


I'm seeing that pattern slowly emerge across the board. I guess it's 
about time we start to drop the legacy kiwi initrd. Can you try and see if


#define USE_DRACUT_FIRSTBOOT

in Images.kiwi.in works for you? That should also drastically reduce the 
initrd size.



Alex

--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org