commit ddcutil for openSUSE:Factory
Hello community, here is the log from the commit of package ddcutil for openSUSE:Factory checked in at 2020-08-17 12:08:06 Comparing /work/SRC/openSUSE:Factory/ddcutil (Old) and /work/SRC/openSUSE:Factory/.ddcutil.new.3399 (New) Package is "ddcutil" Mon Aug 17 12:08:06 2020 rev:8 rq:827209 version:0.9.9 Changes: --- /work/SRC/openSUSE:Factory/ddcutil/ddcutil.changes 2020-06-12 21:39:05.959919727 +0200 +++ /work/SRC/openSUSE:Factory/.ddcutil.new.3399/ddcutil.changes 2020-08-17 12:09:39.242837162 +0200 @@ -1,0 +2,8 @@ +Sun Aug 16 13:20:33 UTC 2020 - Dirk Mueller + +- update to 0.9.9: + * Additional per-thread statistics are shown when --verbose is specified along with --stats + * --dynamic-sleep-adjustment + * ddcutil no longer supports AMD's old proprietary display driver fglrx + +--- Old: ddcutil-0.9.8.tar.gz New: ddcutil-0.9.9.tar.gz Other differences: -- ++ ddcutil.spec ++ --- /var/tmp/diff_new_pack.z3bT6t/_old 2020-08-17 12:09:40.382837797 +0200 +++ /var/tmp/diff_new_pack.z3bT6t/_new 2020-08-17 12:09:40.386837799 +0200 @@ -17,7 +17,7 @@ Name: ddcutil -Version:0.9.8 +Version:0.9.9 Release:0 Summary:Utility to query and update monitor settings License:GPL-2.0-or-later @@ -50,11 +50,11 @@ the time a monitor is calibrated, and then restored when the calibration is applied. -%package -n libddcutil2 +%package -n libddcutil3 Summary:Shared library to query and update monitor settings Group: System/Libraries -%description -n libddcutil2 +%description -n libddcutil3 Shared library version of ddcutil, exposing a C API. ddcutil communicates with monitors implementing MCCS (Monitor Control Command @@ -64,7 +64,7 @@ %package -n libddcutil-devel Summary:Development files for libddcutil Group: Development/Libraries/C and C++ -Requires: libddcutil2 = %{version} +Requires: libddcutil3 = %{version} %description -n libddcutil-devel Header files and pkgconfig control file for libddcutil. @@ -83,12 +83,9 @@ %install %make_install -# Move cmake file to the right location -mkdir -p %{buildroot}%{_libdir}/cmake/%{name}/ -mv %{buildroot}%{_datadir}/cmake/Modules/FindDDCUtil.cmake %{buildroot}%{_libdir}/cmake/%{name}/ -%post -n libddcutil2 -p /sbin/ldconfig -%postun -n libddcutil2 -p /sbin/ldconfig +%post -n libddcutil3 -p /sbin/ldconfig +%postun -n libddcutil3 -p /sbin/ldconfig %files %doc AUTHORS NEWS.md README.md ChangeLog @@ -100,7 +97,7 @@ %{_mandir}/man1/ddcutil.1* %{_bindir}/ddcutil -%files -n libddcutil2 +%files -n libddcutil3 %doc AUTHORS NEWS.md README.md ChangeLog %license COPYING %{_libdir}/libddcutil.so.* ++ ddcutil-0.9.8.tar.gz -> ddcutil-0.9.9.tar.gz ++ 21528 lines of diff (skipped)
commit ddcutil for openSUSE:Factory
Hello community, here is the log from the commit of package ddcutil for openSUSE:Factory checked in at 2020-06-12 21:37:07 Comparing /work/SRC/openSUSE:Factory/ddcutil (Old) and /work/SRC/openSUSE:Factory/.ddcutil.new.3606 (New) Package is "ddcutil" Fri Jun 12 21:37:07 2020 rev:7 rq:808911 version:0.9.8 Changes: --- /work/SRC/openSUSE:Factory/ddcutil/ddcutil.changes 2019-02-27 17:29:13.775319043 +0100 +++ /work/SRC/openSUSE:Factory/.ddcutil.new.3606/ddcutil.changes 2020-06-12 21:39:05.959919727 +0200 @@ -1,0 +2,26 @@ +Mon May 25 07:26:37 UTC 2020 - Simon Lees + +- Update to ddcutil 0.9.8 + * A new command line option, --sleep-multiplier, adjusts the time ddcutil +pauses between sending a request to the monitor and reading from the +monitor. +Many monitors work successfully with shorter sleep durations than required +by the DDC/CI specification, in which case ddcutil execution time can be +considerably reduced. On the other hand, some monitors having communication +difficulty may work with longer sleep durations than required by the DDC/CI +specification. + * A bug fix for the situation where certain mice would lock up during +display detection. + * libddcutil api break and move to v2 + * The libddcutil shared library API has some minor extensions. +- cmake files installed to right location +- Update to ddcutil 0.9.7 + * Fixed the cause of a segfault during display detection if a monitor +appearing to support the USB Monitor Control Class Specification, i.e. one +that uses USB to communicate monitor settings, is connected to the system. + * The release also contains some minor code cleanup. +- Update to ddcutil 0.9.6 + * SONAME support is enabled for libddcutil. + * Other minor enhancements, bug fixes, and API changes. + +--- Old: ddcutil-0.9.5.tar.gz New: ddcutil-0.9.8.tar.gz Other differences: -- ++ ddcutil.spec ++ --- /var/tmp/diff_new_pack.vV6mmX/_old 2020-06-12 21:39:07.567920859 +0200 +++ /var/tmp/diff_new_pack.vV6mmX/_new 2020-06-12 21:39:07.571920862 +0200 @@ -1,7 +1,7 @@ # # spec file for package ddcutil # -# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany. +# Copyright (c) 2020 SUSE LLC # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,15 +17,17 @@ Name: ddcutil -Version:0.9.5 +Version:0.9.8 Release:0 Summary:Utility to query and update monitor settings License:GPL-2.0-or-later Group: System/GUI/Other -Url:http://github.com/rockowitz/ddctool +URL:http://github.com/rockowitz/ddctool Source: https://github.com/rockowitz/%{name}/archive/v%{version}.tar.gz#/%{name}-%{version}.tar.gz BuildRequires: autoconf BuildRequires: automake +# Directory not owned by package error +BuildRequires: cmake BuildRequires: gcc BuildRequires: i2c-tools BuildRequires: libtool @@ -48,11 +50,11 @@ the time a monitor is calibrated, and then restored when the calibration is applied. -%package -n libddcutil0 +%package -n libddcutil2 Summary:Shared library to query and update monitor settings Group: System/Libraries -%description -n libddcutil0 +%description -n libddcutil2 Shared library version of ddcutil, exposing a C API. ddcutil communicates with monitors implementing MCCS (Monitor Control Command @@ -62,7 +64,7 @@ %package -n libddcutil-devel Summary:Development files for libddcutil Group: Development/Libraries/C and C++ -Requires: libddcutil0 = %{version} +Requires: libddcutil2 = %{version} %description -n libddcutil-devel Header files and pkgconfig control file for libddcutil. @@ -81,9 +83,12 @@ %install %make_install +# Move cmake file to the right location +mkdir -p %{buildroot}%{_libdir}/cmake/%{name}/ +mv %{buildroot}%{_datadir}/cmake/Modules/FindDDCUtil.cmake %{buildroot}%{_libdir}/cmake/%{name}/ -%post -n libddcutil0 -p /sbin/ldconfig -%postun -n libddcutil0 -p /sbin/ldconfig +%post -n libddcutil2 -p /sbin/ldconfig +%postun -n libddcutil2 -p /sbin/ldconfig %files %doc AUTHORS NEWS.md README.md ChangeLog @@ -95,7 +100,7 @@ %{_mandir}/man1/ddcutil.1* %{_bindir}/ddcutil -%files -n libddcutil0 +%files -n libddcutil2 %doc AUTHORS NEWS.md README.md ChangeLog %license COPYING %{_libdir}/libddcutil.so.* @@ -106,9 +111,9 @@ %{_includedir}/ddcutil_macros.h %{_includedir}/ddcutil_status_codes.h %{_libdir}/pkgconfig/ddcutil.pc +%{_libdir}/cmake/%{name}/ %{_libdir}/libddcutil.so %dir %{_datadir}/%{name} %dir
commit ddcutil for openSUSE:Factory
Hello community, here is the log from the commit of package ddcutil for openSUSE:Factory checked in at 2019-02-27 17:29:11 Comparing /work/SRC/openSUSE:Factory/ddcutil (Old) and /work/SRC/openSUSE:Factory/.ddcutil.new.28833 (New) Package is "ddcutil" Wed Feb 27 17:29:11 2019 rev:6 rq:679235 version:0.9.5 Changes: --- /work/SRC/openSUSE:Factory/ddcutil/ddcutil.changes 2018-10-04 19:00:53.291241508 +0200 +++ /work/SRC/openSUSE:Factory/.ddcutil.new.28833/ddcutil.changes 2019-02-27 17:29:13.775319043 +0100 @@ -1,0 +2,94 @@ +Tue Feb 26 10:39:09 UTC 2019 - Antonio Larrosa + +- Update to ddcutil 0.9.5 + * Feature x72 (Gamma) +Added support for Virtual Control Panel feature x72 (Gamma). This is +an unusual complex non-continuous feature in that its value can be +changed by the user, and the parenthesized "values" in the +capabilities string require special interpretation. The following +commands have been modified: +- ddcutil getvcp 72: Interpret the output +- ddcutil capabilities: Interpret the parenthesized "values" substring +- ddcutil setvcp: See below. + + * Command setvcp +Can now take 2 byte values an an argument. Values can be specified as +hexadecimal (SH byte then SL) or as decimal (0..65535). + + * Configuration and Diagnostics +Contrary to existing documentation, kernel module i2c_dev is in fact +required when using the proprietary Nvidia driver. +Kernel module documentation has been corrected, and command ddcutil +environment has been updated. + + * Bug Fixes +Fix the cause of an assert failure when displaying the value of feature +x8F (Audio Treble) or x91 (Audio Bass). + + * Monitor Quirks +Instead of setting the "unsupported feature" bit in the getvcp reply +packet for an unsupported feature, the Dell AW3418DW causes I2C failure +with Linux errno EIO. ddcutil now interprets the EIO response as +indicating an unsupported feature instead of reporting an error. This +special handling currently applies only to the Dell AW3418DW. + + * Miscellaneous +Update file README.md and make it more usable as the github overview file. + + * API Changes (see https://www.ddcutil.com/c_api_95/) + +- Update to ddcutil 0.9.4 + * Fix the cause of failure to build from source for the x32 ABI. The file +output by the dumpvcp command no longer contains a TIMESTAMP_MILLIS field, +the number of seconds since start of the machine epoch, typically +January 1, 1970. This field, and its companion TIMESTAMP_TEXT, are ignored +on input, so this change can only affect an external program that relies +on the TIMESTAMP_MILLIS field, say for sorting. + + * Fix an execution failure that resulted from attempting to open an already +opened display. This occured on the capabilities command when the vcp +field in the string returned by the monitor was damaaged or missing, +causing ddcutil to attempt to read the VCP version from feature 0xDF. + + * Features 0x59..0x5E (6 axis separation values). Report these values as +normal continuous (C) values instead of just uninterpreted bytes. + +- Update to ddcutil 0.9.3 + * Display Detection +Display detection no longer performs initial probes of I2C slave addresses +on each possible /dev/i2c device. These initial probes do not return valid +information on a Dell P2715Q, and have been seen to cause screen corruption +on Dell XPS 13 laptops. In addition, /dev/i2c devices for Synopsys +DesignWare are automatically skipped. + +As a result of the changes to display detection, ddcutil detect --verbose +no longer reports the presence of slave addresses x30 (EDID block number) +or x37 (DDC), but does report whether a display is an Embedded Display +Port (eDP) device, which is the case for recent laptop displays. It also +reports the sysfs device name. + + * User Supplied Feature Definitions +ddcutil internals have been extensively restructured for future support of +user supplied feature definitions. This will allow users to supply feature +definitions for manufacturer reserved features, i.e. those in the range +xe0..xff. While not yet ready for public use, there are a couple changes +already visible in the user interface + + * Tracing +Added trace groups: UDF (user defined features), DDCIO (low level DDC +functions), VCP (feature metadata). + +Because of the volume of output, trace group "DDC" has been split into DDC +and DDCIO, with the latter containing low level DDC services. + + * API Changes +The C API has had a few changes to support user supplied feature +definitions and reflecting experience gained from work on the Qt C++ GUI +interface. See API Changes in Release 9.3 +
commit ddcutil for openSUSE:Factory
Hello community, here is the log from the commit of package ddcutil for openSUSE:Factory checked in at 2018-10-04 19:00:49 Comparing /work/SRC/openSUSE:Factory/ddcutil (Old) and /work/SRC/openSUSE:Factory/.ddcutil.new (New) Package is "ddcutil" Thu Oct 4 19:00:49 2018 rev:5 rq:639570 version:0.9.2 Changes: --- /work/SRC/openSUSE:Factory/ddcutil/ddcutil.changes 2018-07-31 15:59:28.891554782 +0200 +++ /work/SRC/openSUSE:Factory/.ddcutil.new/ddcutil.changes 2018-10-04 19:00:53.291241508 +0200 @@ -1,0 +2,50 @@ +Tue Oct 2 10:38:11 UTC 2018 - Antonio Larrosa - 0.9.2 + +- Update to ddcutil 0.9.2 + * Command ddcutil detect ++ Eliminate the Supports DDC: line. The output of this line reflects the result + of a simple test for slave address x37 at the I2C layer. This command can + fail on monitors that support DDC and succeed in monitors where DDC is + turned off. The result of the x37 test is still reported as part of the + --verbose output of detect. + ++ Eliminate duplicate displays for DisplayPort connected monitors. + + * Command ddcutil --help ++ Include command scs (Save Current Settings) in the output of ddcutil --help. + ddcutil scs executes a Save Current Settings operation, which is supported + by some but not all DDC capable displays. This command was implemented some + time ago, but was not described in the help output. + + * Command ddcutil environment ++ When checking for group i2c membership, issue a special message if running + as root instead of the generic message that the current user is not a + member of group i2c. + + * USB connected displays ++ Fix an invalid feature read of a USB connected display, observed when + getting the controller manufacturer but VCP feature code xC8 is unsupported. + ++ When reading a USB report, regard errno EINVAL as an expected indication + that no value is found rather than an unexpected status code. + + * Tracing ++ Fix the cause of a segfault when tracing a write-only DDC exchange + (i.e. setting a VCP value) ++ Disable debug messages regarding device id table initialization in the + environment command. ++ Eliminate double newlines in several error and trace messages + + * Building ddcutil ++ libusb function libusb_set_debug() is deprecated in recent libusb versions, + in favor of libusb_set_option(), resulting in a compiler warning when flag + -Wdeprecated-declarations is set. Calls to libusb_set_debug() in file + libusb_util.c are replaced by iftested code that uses the proper function. ++ Fix an unreachable assert() statement in file execution_stats.c that was + detected by compiling with option -Werror-switch-unreachable. ++ Add "__attribute__ ((deprecated))" statements to functions + ddca_report_active_displays() and ddca_get_feature_name_by_display(), in + header file ddcutil_c_api.h. The inline documentation for these function + already indicated their deprecated status. + +--- Old: ddcutil-0.9.1.tar.gz New: ddcutil-0.9.2.tar.gz Other differences: -- ++ ddcutil.spec ++ --- /var/tmp/diff_new_pack.NJ5cWM/_old 2018-10-04 19:00:54.027240737 +0200 +++ /var/tmp/diff_new_pack.NJ5cWM/_new 2018-10-04 19:00:54.027240737 +0200 @@ -12,12 +12,12 @@ # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. -# Please submit bugfixes or comments via http://bugs.opensuse.org/ +# Please submit bugfixes or comments via https://bugs.opensuse.org/ # Name: ddcutil -Version:0.9.1 +Version:0.9.2 Release:0 Summary:Utility to query and update monitor settings License:GPL-2.0-or-later ++ ddcutil-0.9.1.tar.gz -> ddcutil-0.9.2.tar.gz ++ 1858 lines of diff (skipped)
commit ddcutil for openSUSE:Factory
Hello community, here is the log from the commit of package ddcutil for openSUSE:Factory checked in at 2018-07-31 15:59:23 Comparing /work/SRC/openSUSE:Factory/ddcutil (Old) and /work/SRC/openSUSE:Factory/.ddcutil.new (New) Package is "ddcutil" Tue Jul 31 15:59:23 2018 rev:4 rq:626039 version:0.9.1 Changes: --- /work/SRC/openSUSE:Factory/ddcutil/ddcutil.changes 2018-06-29 22:30:03.186317353 +0200 +++ /work/SRC/openSUSE:Factory/.ddcutil.new/ddcutil.changes 2018-07-31 15:59:28.891554782 +0200 @@ -1,0 +2,5 @@ +Sun Jul 29 09:26:24 UTC 2018 - jeng...@inai.de + +- Use noun phrase in summary. Use preexisting macro for SUSE docdir. + +--- Other differences: -- ++ ddcutil.spec ++ --- /var/tmp/diff_new_pack.bkpsOf/_old 2018-07-31 15:59:30.16926 +0200 +++ /var/tmp/diff_new_pack.bkpsOf/_new 2018-07-31 15:59:30.159556934 +0200 @@ -19,7 +19,7 @@ Name: ddcutil Version:0.9.1 Release:0 -Summary:Query and update monitor settings +Summary:Utility to query and update monitor settings License:GPL-2.0-or-later Group: System/GUI/Other Url:http://github.com/rockowitz/ddctool @@ -73,7 +73,7 @@ %build ./autogen.sh %configure --enable-lib=yes --enable-drm=yes --enable-usb=yes \ - --docdir="%{_datadir}/doc/packages/%{name}" + --docdir="%{_defaultdocdir}/%{name}" make %{?_smp_mflags} V=1 %check
commit ddcutil for openSUSE:Factory
Hello community, here is the log from the commit of package ddcutil for openSUSE:Factory checked in at 2018-06-29 22:29:57 Comparing /work/SRC/openSUSE:Factory/ddcutil (Old) and /work/SRC/openSUSE:Factory/.ddcutil.new (New) Package is "ddcutil" Fri Jun 29 22:29:57 2018 rev:3 rq:617848 version:0.9.1 Changes: --- /work/SRC/openSUSE:Factory/ddcutil/ddcutil.changes 2018-01-13 21:44:29.414905418 +0100 +++ /work/SRC/openSUSE:Factory/.ddcutil.new/ddcutil.changes 2018-06-29 22:30:03.186317353 +0200 @@ -1,0 +2,71 @@ +Tue Jun 19 15:09:12 UTC 2018 - alarr...@suse.com + +- Update to ddcutil 0.9.1 + * Fix the cause of an abort that may occur on command environment --verbose +when examining an extremely large log file. + +- Update to ddcutil 0.9.0 + * Significant Command Line Changes + * The setvcp command now allows new values for Continuous type features to be +specified as relative values, e.g. the following commands increase or +decrease the value of the brightness feature by 5. +* ddcutil setvcp 10 + 5 +* ddcutil setvcp 10 - 5 + * Option --no-table is now the default. + * Table type features are by default not included in most feature groups +specified on getvcp, e.g. getvcp known. + * The interpretation of --show-unsupported has been tweaked. This option +applies to command getvcp. (The probe command always reports unsupported +features.) Command getvcp reports unsupported features if any of the +following hold: +- A specific feature was specified by its code, as opposed to a feature set. +- Verbose output is in effect +- Option --show-unsupported was specified. + * Options --rw and --ro apply to both the getvcp and vcpinfo commands. +Option --wo applies only to vcpinfo. + * Filters the information returned by vcpinfo to that for the specified +MCCS version. + * Additional feature sets have been defined for the getvcp and vcpinfo +commands. They surface internal ddcutil feature descriptions, and are +intended to facilitate exploring the MCCS specification and its +implementation on particular monitors. + * The VCP file created by dumpvcp now includes a PRODUCT_CODE field including +the manufacturer product code from the EDID. For some manufacturers, the +model name in the EDID does not in fact distinguish among models. Notably, +Samsung commonly uses just "Syncmaster" for the model name. Currently, +loadvcp recognizes this field name but does not make use of the value. + * The C API has been extensively revised reflecting experience gained from +work on a Qt C++ GUI interface. See API Changes in Release 9.0 +(http://www.ddcutil.com/c_api_90/) for details. + * See more detailed changes at http://www.ddcutil.com/release_notes/#090 + +- Update to ddcutil 0.8.6 + * The externally visible changes in this release include minor enhancements +and bug fixes. There are also changes in the C API. Internally, there have +been extensive changes in support of the C and (future) Python APIs. + * Because of the design of the DDC/CI protocol, there is no certain way to +distinguish a response indicating that a feature of type Table (T) is +unsupported from a DDC/CI protocol error. As a result, ddcutil getvcp +performs the maximum number of retries on a Table type feature before +giving up. However, Table type features are rarely implemented. The new +--notable option allows Table type features to be ignored, speeding up +execution of getvcp commmands for multiple features. + * Option --notable applies if the argument to getvcp is a feature set, e.g. +COLOR or KNOWN instead of a single feature id. In that case Table type +features are ignored. + * The use of longjmp() to handle exceptional error condiitions (typically +program logic errors) has been eliminated. + * API functions removed: ddca_register_jmp_buf(), +ddca_get_global_failure_information() + * Structs removed: DDCA_Global_Failure_Information + * Add trace class ENV for tracing environment related functions + * Internally, many functions in key portions of the code base now return +exception-like structs instead of status codes. Option --excp causes +ddcutil to report these exception-like structs when they are converted +to status codes (and the internal detail is discarded). + * Fix a segfault when probing DRM using the environment command on aarch64. + * Fix a typo in the recommendations section at the end of the environment +command. + * See more detailed changes at http://www.ddcutil.com/release_notes/#086 + +--- Old: ddcutil-0.8.5.tar.gz New: ddcutil-0.9.1.tar.gz
commit ddcutil for openSUSE:Factory
Hello community, here is the log from the commit of package ddcutil for openSUSE:Factory checked in at 2018-01-13 21:44:20 Comparing /work/SRC/openSUSE:Factory/ddcutil (Old) and /work/SRC/openSUSE:Factory/.ddcutil.new (New) Package is "ddcutil" Sat Jan 13 21:44:20 2018 rev:2 rq:557313 version:0.8.5 Changes: --- /work/SRC/openSUSE:Factory/ddcutil/ddcutil.changes 2017-09-09 20:25:30.362790283 +0200 +++ /work/SRC/openSUSE:Factory/.ddcutil.new/ddcutil.changes 2018-01-13 21:44:29.414905418 +0100 @@ -1,0 +2,42 @@ +Wed Dec 13 16:49:45 UTC 2017 - alarr...@suse.com + +- Update to ddcutil 0.8.5 + * This release contains a large number of minor enhancements and bug fixes + * The environment command is extensively revised. The increasingly large +collection of tests has been consolidated. + * The required glib-2.0 version has been increased from 2.16 to 2.32 +reflecting the use of glib thread functions. + * Fix a logic error in the VCP version comparison function vcp_version_le(). +This bug affected only audio related VCP feature codes x8f, x91, and x93. +It also affected experimental command watch which listens for monitor +changes not made by ddcutil, i.e. by pressing buttons on the monitor. + * Properly handle the failure case where a display is detected on an I2C bus +(EDID is read) but DDC communication fails, and the user specifies the +display on the command line using the I2C bus number (option --bus). + * Fix the cause of a segfault when the loadvcp command reads a user modified +VCP file. The command now fails gracefully if none of MFG_ID, MODEL, +and SN are present. + * Fix the cause of a segfault when displaying I2C functionality flags in the +--environment command. This segfault was seen only in 32 bit versions of +ddcutil. + * The --stats option showed incorrect time statistics on 32 bit versions of +ddcutil. + * Add "-lddcutil" to output of "pkgconfig ddcutil --libs". + * Improve reporting of the individual errors that result in command failure +due to maximum I2C retries exceeded. + * interrogate, environment and usbenvironment now redirect all stderr output +to stdout for easier capture + * Added command line options -trcfile and -trcfunc to enable tracing by +file name and function name. + * Added configuration option --enable-x11 controlling whether X11 related +diagnostics are included in the environment and interrogate commands, +allowing ddcutil to build in embedded environments that lack X11. +The default is yes. + * Verbose EDID decription, e.g. on command detect --verbose, now reports EDID +byte 24 (x14), the supported features bitmap. This is purely informational. + * Ongoing work to make functions thread safe. + * Code cleanup. + * The full list of changes can be read at +http://www.ddcutil.com/release_notes/ + +--- Old: ddcutil-0.8.4.tar.gz New: ddcutil-0.8.5.tar.gz Other differences: -- ++ ddcutil.spec ++ --- /var/tmp/diff_new_pack.zwfieN/_old 2018-01-13 21:44:31.314816860 +0100 +++ /var/tmp/diff_new_pack.zwfieN/_new 2018-01-13 21:44:31.318816674 +0100 @@ -14,26 +14,28 @@ # Please submit bugfixes or comments via http://bugs.opensuse.org/ # + + Name: ddcutil -Version:0.8.4 +Version:0.8.5 Release:0 Summary:Query and update monitor settings License:GPL-2.0+ Group: System/GUI/Other Url:http://github.com/rockowitz/ddctool Source: https://github.com/rockowitz/%{name}/archive/v%{version}.tar.gz#/%{name}-%{version}.tar.gz -BuildRequires: automake BuildRequires: autoconf +BuildRequires: automake BuildRequires: gcc BuildRequires: i2c-tools BuildRequires: libtool -BuildRequires: pkgconfig(xrandr) +BuildRequires: python-devel +BuildRequires: pkgconfig(glib-2.0) BuildRequires: pkgconfig(libdrm) BuildRequires: pkgconfig(libudev) BuildRequires: pkgconfig(libusb-1.0) -BuildRequires: python-devel +BuildRequires: pkgconfig(xrandr) BuildRequires: pkgconfig(zlib) -BuildRequires: pkgconfig(glib-2.0) %description ddcutil communicates with monitors implementing MCCS (Monitor Control Command @@ -86,7 +88,7 @@ %postun -n libddcutil0 -p /sbin/ldconfig %files -%doc AUTHORS COPYING NEWS README.md +%doc AUTHORS COPYING NEWS.md README.md ChangeLog %dir %{_datadir}/%{name} %dir %{_datadir}/%{name}/data %{_datadir}/%{name}/data/*rules @@ -95,7 +97,7 @@ %{_bindir}/ddcutil %files -n libddcutil0 -%doc AUTHORS COPYING NEWS README.md +%doc AUTHORS COPYING NEWS.md README.md ChangeLog %{_libdir}/libddcutil.so.* %files -n libddcutil-devel ++