Hi.
I am not a expert of automake and libtools then I am struggling in
fixing the problem, why does it try to use a path which contains a
system library and not a cross compiled library ? How can I modify
this behaviours ??!
The Makefile currently in SVN contains a PKG_FIXUP:=autoreconf
Hi!
I noticed that there is support for the AVM Fritzbox 3370 in openwrt trunk. I
just
compiled a image and got these files:
openwrt-lantiq-xway-FRITZ3370.eva
openwrt-lantiq-xway-FRITZ3370-jffs2-128k.rootfs
openwrt-lantiq-xway-rootfs.tar.gz
Does anybody have an idea how to flash it to this
I noticed that there is support for the AVM Fritzbox 3370 in openwrt trunk. I
just
compiled a image and got these files:
openwrt-lantiq-xway-FRITZ3370.eva
openwrt-lantiq-xway-FRITZ3370-jffs2-128k.rootfs
openwrt-lantiq-xway-rootfs.tar.gz
Does anybody have an idea how to flash it to this
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon
From: Karl Palsson ka...@remake.is
Backfire had working gpio buttons on atheros, but it's broken in AA,
presumably due to gpiolib changes With the following changes hotplug
button events are properly generated again in trunk. This patch should
also be applied to the AA branch, as it's a
I could *start* working on Broadcom 802.11ac devices, but noone so far
decided to donate any of them to the OpenWrt (or me), and they are
quite expensive so far.
I have some 802.11ac Broadcom based hardware that I will be sending your
way shortly.
On Apr 7, 2013, at 5:28 AM, Felix Fietkau wrote:
On 2013-04-04 4:56 AM, Jay Carlson wrote:
On Apr 3, 2013, at 4:30 PM, Jay Carlson wrote:
In addition, touching errno means touching a TLS model symbol, and
that's not supported in gcc 4.6.
OK, that's starting to look like a bug.
At the
Hi,
this patch add the swlib port-based attribute
led_polarity
to control led polarity on rt5350 based boards,
tr_bad
tr_good
to get transmit good/bad packet counter.
Also adds capability to change led blink frequency, maximal packet size
and configuring broadcast storm protection by adds
Interesting patches! Would you mind porting these to the 3.8 kernel and
enabling setting the LED Polarity from Device Tree Source (dts) files?
- Felix
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
Hi
This is a quick patch to enable HT for mesh mode
https://github.com/cozybit/open80211s/wiki/HOWTO#high-throughput
http://lists.open80211s.org/pipermail/devel/2012-March/002990.html
Signed-off-by: Etienne CHAMPETIER etienne.champet...@free.fr
Index: package/mac80211/files/lib/wifi/mac80211.sh
I'm ordering some of those Toplink RT5350 modules from Alibaba. I need
to get something initially loaded into the SPI flash.
Does the MIPS u-boot in the OpenWRT tree run on the RT5350? If so,
then I can load it into RAM via JTAG, jump to it and get flash
commands? That will let me initialize an
On Wed, 3 Apr 2013, Rafa? Mi?ecki wrote:
I wanted predefined 6-monthly release cycles for years now, while others
think a release should bring something new all the time.
I'm not going to reinvent the wheel analyzing how hard it is to say
how many features make it worth releasing new version.
If so,
then I can load it into RAM via JTAG, jump to it and get flash
commands? That will let me initialize an empty flash.
This scenario works fine with rt3352, just try...
Doesn't look like MIPS has the small SRAM region like ARM does. Is
there a write up around somewhere on how to get
Hi!
On 04/09/2013 12:38 AM, jonsm...@gmail.com wrote:
Does the MIPS u-boot in the OpenWRT tree run on the RT5350? If so,
U-Boot for Ralink chips is not (yet) part of OpenWrt, however, you can compile
it from the sources on
https://github.com/8devices/u-boot
Flashing the boards via JTAG will
Hi John,
You will have to know RAM controller config to prepare RAM before
writing into it. This usually goes to OpenOCD script and is executed
via MIPS EJTAG. But is often just a question of writing several
registers (sometimes in the right order)
You can look in U-Boot code from Carambola (8th
It will be a while for the boards to arrive from China. But they look
really good. 8MB flash, 32MB RAM for less than the $7.50 quotes on
Aliaba. Chip antenna or IPEX. JTAG on connector
The one with pins supports one Ethernet. The pseudo-miniPCIe one
supports two Ethernet.
On Mon, Apr 8, 2013 at
On Mon, Apr 8, 2013 at 6:20 PM, Drasko DRASKOVIC
drasko.drasko...@gmail.com wrote:
Hi John,
You will have to know RAM controller config to prepare RAM before
writing into it. This usually goes to OpenOCD script and is executed
via MIPS EJTAG. But is often just a question of writing several
Yes,
I have seen these boards and contacted suppliers. they seem really responsive.
I am missing some more flash though. 8MB is just enough, but it seems
like RT5350 chipset does not support more.
John,
do you know what would be the best way to augment flash on these? Some
cheap NAND? SD Card?
On Mon, Apr 8, 2013 at 6:24 PM, Drasko DRASKOVIC
drasko.drasko...@gmail.com wrote:
Yes,
I have seen these boards and contacted suppliers. they seem really responsive.
I am missing some more flash though. 8MB is just enough, but it seems
like RT5350 chipset does not support more.
John,
do
On Mon, Apr 8, 2013 at 6:27 PM, Drasko DRASKOVIC
drasko.drasko...@gmail.com wrote:
BTW, have you seen this one :
http://www.alibaba.com/product-gs/815002442/RT5350_wifi_module_oem.html
I think I found out those were 88Y ($14.19). That is twice the price of Toplink.
Looks even more
On Mon, Apr 8, 2013 at 6:28 PM, jonsm...@gmail.com jonsm...@gmail.com wrote:
On Mon, Apr 8, 2013 at 6:24 PM, Drasko DRASKOVIC
drasko.drasko...@gmail.com wrote:
Yes,
I have seen these boards and contacted suppliers. they seem really
responsive.
I am missing some more flash though. 8MB is
Great, thanks a lot John.
I has just a little trouble with their miniPCI card, as it has only
one hole in the middle, and will not fit into the standard miniPCI
connector, which demand two holes on the top.
How do you plan to fix this card?
BR,
Drasko
On Tue, Apr 9, 2013 at 12:59 AM,
On Mon, Apr 8, 2013 at 7:04 PM, Drasko DRASKOVIC
drasko.drasko...@gmail.com wrote:
Great, thanks a lot John.
I has just a little trouble with their miniPCI card, as it has only
one hole in the middle, and will not fit into the standard miniPCI
connector, which demand two holes on the top.
It
On Mon, Apr 8, 2013 at 7:09 PM, jonsm...@gmail.com jonsm...@gmail.com wrote:
On Mon, Apr 8, 2013 at 7:04 PM, Drasko DRASKOVIC
drasko.drasko...@gmail.com wrote:
Great, thanks a lot John.
I has just a little trouble with their miniPCI card, as it has only
one hole in the middle, and will not
This patch creates packages for the tcp_lp and tcp_htcp congestion algorithms.
tcp_lp is used for low priority traffic (like torrents) and can be integrated
with
transmission. tcp_htcp is used for high speed networks with high latency.
All kernel code is already mainstream and normally compiled
Hi
This is a quick patch to enable HT for mesh mode
https://github.com/cozybit/open80211s/wiki/HOWTO#high-throughput
http://lists.open80211s.org/pipermail/devel/2012-March/002990.html
For my test setup the speed increased from 1-2 Mbytes/sec to 8-10 Mbytes/sec
(iperf)
I'm resending the patch
On 04/09/2013 01:24 AM, Drasko DRASKOVIC wrote:
I am missing some more flash though. 8MB is just enough, but it seems
like RT5350 chipset does not support more.
NACK. We got Rt5350 boards with 32MB NOR (ALL5003, Art.Nr.92763).
___
openwrt-devel
27 matches
Mail list logo
