Hi,
Andrew McDonnell b...@andrewmcdonnell.net writes:
7. MAC addresses - I am not sure what the policy should be - the factory sets
them all to the stickered MAC address, but DD-WRT reads a different MAC
address from the ART partition. Currently I set the stickered MAC as the
default for the
In follow up, in further testing it seems the problem with the switch and the
LEDS have resolved themselves -
I have confirmed in my latest image that USB LED works, WLAN LED works, WAN
LED works, and devices on the switch can ping each other.
So only the minor issue of changing the colour of
Was about to build a new version of trunk when I decided to check on one of
my needs (asterisk). It's still in 11.2.1.
Can we get this pushed into trunk?
On Thu, Mar 28, 2013 at 10:57 PM, Jiri Slachta slac...@cesnet.cz wrote:
The changelog for the latest version of asterisk mostly brings
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol
for UART communication, but due to the lack of GPL sources we couldn't get it
to work. For this reason the network is configured only for LAN.
Add support of D-link DIR-620D1 for current trunk.
Signed-off-by: Serge Vasilugin vasilu...@yandex.ru
Index: target/linux/ramips/image/Makefile
===
--- target/linux/ramips/image/Makefile (revision 36367)
+++
Version bump Privoxy to 3.0.21. Addresses bug #13350.
Signed-off-by: Ian Leonard antonla...@gmail.com
---
Index: packages/net/privoxy/Makefile
===
--- packages/net/privoxy/Makefile (revision 36354)
+++
