On 2/17/14, 09:05 PM, Matti Laakso wrote:
/ The latest hostapd and some of the wireless drivers support DFS, which
// is required on the 5 GHz band in many countries. This patch adds the
// correct option to the hostapd configuration if dfs=1 is set (along with
// the country code) in the
ath: phy0: Failed to stop TX DMA, queues=0x004!
ath: phy0: unsupported hw bitrate detected 0x15 using 1 Mbit (- happens
with AR9132)
My experience with:
AA r39154
hostapd r39155
mac80211 r39150
And it seems to happen mostly with Atheros AR9130 rev 2 while with Atheros
AR9132 rev 2 and AR7240
this very useful for troubleshooting , thanks very much!
-邮件原件-
发件人: openwrt-devel-boun...@lists.openwrt.org
[mailto:openwrt-devel-boun...@lists.openwrt.org] 代表 Bastian Bittorf
发送时间: 2014年2月22日 4:23
收件人: OpenWrt Development List
主题: Re: [OpenWrt-Devel] how do I troubleshoot Kernel Panic
Hi!
Trying to compile buildroot to be able to fix the
problem with failsafe mode not responding
on my TL-WR1043ND v2 here (Think the problem
is that this device needs to use eth1, not eth0, as the
failsafe port..)
Anyway I ran into problems here and the most difficult one is the
following:
A workaround is necessary to enable C# (CXX) language
(CMakeLists.txt is DOS format and patching fails)
in CMake because a test fails
Error was:
Unknown extension .cxx for file
try_compile() works only for enabled languages. Currently these are:
C
DISCLAIMER: I cannot test this further
v2 : package/install slipped through the cracks, add it
A workaround is necessary to enable C# (CXX) language
(CMakeLists.txt is DOS format and patching fails)
in CMake because a test fails
Error was:
Unknown extension .cxx for file
try_compile() works only for enabled languages. Currently
On Mon, Feb 24, 2014 at 7:02 PM, Dirk Neukirchen dirkneukirc...@web.de wrote:
v2 : package/install slipped through the cracks, add it
A workaround is necessary to enable C# (CXX) language
(CMakeLists.txt is DOS format and patching fails)
in CMake because a test fails
Error was:
Unknown
On 02/24/2014 06:41 PM, Jonas Gorski wrote:
This package needs a maintainer before it can be considered for
inclusion. Will you be the maintainer?
If we're in maintainer update mode, I've been trying to be maintainer for a
package for a little while now... The package somehow was
On 2/24/14, 9:46 AM, Matti Laakso wrote:
On 2/17/14, 09:05 PM, Matti Laakso wrote:
/ The latest hostapd and some of the wireless drivers support DFS, which
// is required on the 5 GHz band in many countries. This patch adds the
// correct option to the hostapd configuration if dfs=1 is set
refresh patch (patch configure.ac instead of .in)
zabbix-agentd tested on wr1043nd
zabbix-* compile tested
zabbix-extra-wifi discovery still not working
(need an suid helper to make ubus calls)
don't forget this pending patch
http://patchwork.openwrt.org/patch/4847/
Signed-off-by: Etienne
Ping
- Mail original -
De: Etienne CHAMPETIER etienne.champet...@free.fr
À: openwrt-devel@lists.openwrt.org
Cc: Etienne CHAMPETIER etienne.champet...@free.fr
Envoyé: Lundi 10 Février 2014 00:07:54
Objet: [PATCH] Remove luci_fixtime, this as been replaced in openwrt by
sysfixtime
*bump*
-John
On Wed, Jul 3, 2013 at 3:29 PM, John Szakmeister j...@szakmeister.net wrote:
Signed-off-by: John Szakmeister j...@szakmeister.net
---
include/scan.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
I noticed that the progress output was stepping all over itself, which
udev Makefile.am has two different .pc files and put them
into two locations. Don't know if changing the udev Makefile
or changing the pkgconfig paths is the right way - someone
has to decide :)
udev and vala use an additional pkg-config dir
add it to the path
discovered because openobex did not
On 24.02.2014 19:41, Jonas Gorski wrote:
On Mon, Feb 24, 2014 at 7:02 PM, Dirk Neukirchen dirkneukirc...@web.de
wrote:
v2 : package/install slipped through the cracks, add it
A workaround is necessary to enable C# (CXX) language
(CMakeLists.txt is DOS format and patching fails)
in CMake
Hi
Can we disable anonymous bug report, it may prevent spam,
and help keep contact with the bug reporter.
Etienne
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
hi
in this case , you can check dropped packet transmission by perform
ifconfig on you ssh client , and on your pc side , you should looking for
packet retransmitting by wiredshark. so that to locate who caused
dropped packet on your network.
If you are seeing a substantial
* Felix Fietkau n...@openwrt.org [24.11.2013 09:08]:
thanks for feedback - i understand your argument and agree.
beside that: anything against patch 1-5?
No objections from me, except that I think 1 and 2 should be merged into
one patch.
ping - should i resend the (simple) patch?
17 matches
Mail list logo