https://dev.openwrt.org/ticket/20201
On BB I used 20dBm for both 2.4 and 5GHz on the same router.
Sent with AquaMail for Android
http://www.aqua-mail.com
On 29 юли 2015 г. 18:40:10 Ben West b...@gowasabi.net wrote:
This is what I observe running Barrier Breaker on UBNT M5 products, too. I
Well, it looks like the txpower of your wdnr3800 is limited to 17dBm because of
the hardware reg-domain settings.
Kind regards,
... sent from my iPhone
Am 29.07.2015 um 10:43 schrieb Nicola von Thadden n...@vthadden.de:
Hi,
I have this strange behaviour down below, for which I also
This is what I observe running Barrier Breaker on UBNT M5 products, too. I
believe the 17dBm limit is intentional, i.e. per regulation. The 30dBm tx
power limit applies to channels 149 and above, I believe.
Also (kind of off-topic): Do you know why 5Ghz channels 36-48 are forced
to be 17dBm
The pinctrl-rt2880 code doesn't support multiple functions with the same
name. This will result in incorrect pinmux configuration.
The MT7621 uses 2 bit wide configuration of the sdhci, spi, mdio, pcie,
wdt, uart2 and uart3. But the code only changed a single bit for uart3,
uart2 and mdio. Also
Bump to dnsmasq v2.74
Minor patch refresh also required.
Signed-off-by: Kevin Darbyshire-Bryant ke...@darbyshire-bryant.me.uk
---
package/network/services/dnsmasq/Makefile | 4 ++--
.../patches/210-dnssec-improve-timestamp-heuristic.patch | 14 ++
2 files
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi :-)
briefing:
the automatic flashing-process - holding down the WPS-button in order
to flash an image downloaded via TFTP - no longer works for certain
WDR3600-devices with hardware revision 1.5 that have only minor
(visible) differences to
Sven,
On Mon, 2015-07-20 at 19:10 +0200, Sven Eckelmann wrote:
Signed-off-by: Sven Eckelmann s...@open-mesh.com
---
v2: Rebased to fix conflict with r46207
...79-add-gpio-func-register-for-QCA955x-SoC.patch | 60
++
...79-add-gpio-func-register-for-QCA955x-SoC.patch
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
target/linux/sunxi/modules.mk | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/target/linux/sunxi/modules.mk b/target/linux/sunxi/modules.mk
index a4c71b9..0981fe5 100644
--- a/target/linux/sunxi/modules.mk
+++
Newer kernels make use of libahci in ahci-platform, ie. also on non-PCI
platforms.
As there is no single config symbol deciding whether libahci.ko is
being built or not it seems the most sensitive thing to package it in
kmod-ata-core.
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
target/linux/generic/config-4.1 | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/generic/config-4.1 b/target/linux/generic/config-4.1
index 1687487..51efabb 100644
--- a/target/linux/generic/config-4.1
+++
Similar to brcm2708 have framebuffer video support built-in so
fbconsole gets initialized during boot.
Plus more kernel config carefully sync'ed against upstream
sunxi_defconfig.
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
target/linux/sunxi/config-4.1 | 599
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
target/linux/oxnas/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/oxnas/Makefile b/target/linux/oxnas/Makefile
index 32bcab8..2d244db 100644
--- a/target/linux/oxnas/Makefile
+++
Add new brcmfmac-firmware package.
(Firmware blobs for BCM43362 were added upstream recently)
PKG_MIRROR_MD5SUM should be re-added once the newer file is available
on OpenWrt's mirror.
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
package/firmware/linux-firmware/Makefile | 26
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
target/linux/oxnas/config-4.1 | 374 +
.../oxnas/files/drivers/usb/host/ehci-oxnas.c | 2 +-
.../010-arm_introduce-dma-fiq-irq-broadcast.patch | 56 +++
.../250-add-plxtech-vendor-prefix.patch
This package contains the WiFi NVRAM distributed with Bananian [1].
It's currently needed to use the WiFi module (BCM43362 SDIO) on the
BananaPro with the brcmfmac cfg80211 driver which doesn't yet support
retrieving calibration data via device-tree or platform_data.
(DOS-style newlines in
Add kmod-ata-sunxi and kmod-brcmfmac to support all board features
by default.
Signed-off-by: Daniel Golle dan...@makrotopia.org
---
target/linux/sunxi/profiles/bananapro.mk | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/linux/sunxi/profiles/bananapro.mk
Hi,
I am working on openwrt-ar71xx. After upload the image file the GUI will be
access on some IP address. Now I want to change the GUI, Could anyone tell
how I can change the GUI, i means to say which file shall I modify.
Thanks Regards,
John
___
This patch fixes weak radio signal reported by nikola.georgiev
Signed-off-by: L. D. Pinney ldpin...@gmail.com
---
Patch applies to CC as well.
target/linux/ramips/dts/RE6500.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/target/linux/ramips/dts/RE6500.dts
Hi all,
This as been merged in trunk (thanks John) and in CC (thanks jow)
Just a quick note, LXC on both centos 6 and fedora 22 can have a dir chmod
770 and chown root:root
in the path to the rootfs and it still work with non root user,
so maybe my patches are just workarounds (or maybe not,
On Wed, 29 Jul 2015, John kerry wrote:
I am working on openwrt-ar71xx. After upload the image file the GUI will be
access on some IP address. Now I want to change the GUI, Could anyone tell
how I can change the GUI, i means to say which file shall I modify.
There are a lot of different files,
Subject: [PATCH] ramips: Fix Ticket #20153 swap radio calibration data pointers
on the RE6500
This patch fixes weak radio signal reported by nikola.georgiev
Signed-off-by: L. D. Pinney ldpin...@gmail.com
---
Patch applies to CC as well.
target/linux/ramips/dts/RE6500.dts | 4 ++--
1 file
The BT Home Hub 5A uses three PEF7071 with PHY ID 0xd565a401. Daniel's
PHY driver (for his u-boot sources) already supports that PHY because
it uses a PHY ID mask of 0xfff8.
Signed-off-by: Martin Blumenstingl martin.blumensti...@googlemail.com
---
22 matches
Mail list logo
