On 09/12/2018 22:54, Michael Heimpold wrote:
This is a trial to make it more obvious what the historically
grown code is actually doing.
Signed-off-by: Michael Heimpold
---
V2: use Jo-Philipp Wich's proposal
inittab.c | 7 ++-
1 file changed, 2 insertions(+), 5 deletions(-)
diff
I'd like to review your patch but it hits the ML as an attachment making
it impossible. regardless, the subject is misleading, there are lots of
phy types and i fail to understand why this is required.
John
___
openwrt-devel mailing list
On 06/12/2018 16:25, Jonathan Thibault wrote:
This is a very simple patch that completes sysupgrade functionality on UBNT
ER8.
Default layout leaves about 128MB free on the kernel partition so there is
plenty of space for temporary config backups.
Hi Jonathan,
the content of the patches is
On 05/12/2018 07:05, robinson wrote:
When I tried to add a led timer tirgger in "target/linux/ramips/base-files/
etc/board.d/01_leds" like below
ucidef_set_led_timer "system" "system" "zhuotk:green:system" "1000" "1000"
it will be failed to add value to "delayon" and "delayoff". This commit fix
On Mon, 17 Dec 2018 at 12:59, Rafał Miłecki wrote:
>
> On Sat, 15 Dec 2018 at 08:05, Yousong Zhou wrote:
> >
> > On Sat, 15 Dec 2018 at 06:00, Rafał Miłecki wrote:
> > >
> > > I've noticed a problem with kmod-phy-bcm-ns-usb2 defined in the
> > > target/linux/bcm53xx/modules.mk
> > >
> > > Steps
On Sat, 15 Dec 2018 at 08:05, Yousong Zhou wrote:
>
> On Sat, 15 Dec 2018 at 06:00, Rafał Miłecki wrote:
> >
> > I've noticed a problem with kmod-phy-bcm-ns-usb2 defined in the
> > target/linux/bcm53xx/modules.mk
> >
> > Steps to reproduce:
> > 1) Setup .config with:
> > CONFIG_TARGET_bcm53xx
>
Hi!
On Mon, Dec 17, 2018 at 7:43 AM Roger Pueyo Centelles | Guifi.net
wrote:
>
> Hi Seb,
>
> You nailed it! :-)
>
> I was missing the ' "pinctrl-names = "default"; ' line. I must have
> removed it from the .dts file I used as the source for mine at some
> point. Then I just sorted the
On Sun, Dec 16, 2018 at 4:54 PM Dave Taht wrote:
>
>
> A pretty deep look at home MIPS and arm routers, and a surprising bug in
> Linux/MIPS - by mudge and co:
>
> https://cyber-itl.org/2018/12/07/a-look-at-home-routers-and-linux-mips.html
>
> I have no idea if current openwrt, or what prior
A pretty deep look at home MIPS and arm routers, and a surprising bug in
Linux/MIPS - by mudge and co:
https://cyber-itl.org/2018/12/07/a-look-at-home-routers-and-linux-mips.html
I have no idea if current openwrt, or what prior releases... are subject to
the problems they outline.
Hi Seb,
You nailed it! :-)
I was missing the ' "pinctrl-names = "default"; ' line. I must have
removed it from the .dts file I used as the source for mine at some
point. Then I just sorted the pinctrl-0/1 issue, which I had already
tried in any possible combination.
After fixing this, I have
On Sun, Dec 16, 2018 at 06:23:53PM +0100, Roger Pueyo Centelles | Guifi.net
wrote:
>
>
> Hi,
Hello Roger!
> [...]
>
> leds {
> compatible = "gpio-leds";
> pinctrl-1 = <_rssilow_pin _rssimediumhigh_pin
> _rssihigh_pin>;
>
> [...]
>
> {
>
Hi,
Some weeks ago I sent a PR adding ar71xx support for the Comfast
CF-E110N [1], an outdoor 2,4 GHz router. Everything was working fine. A
few days later I started working on adding ath79 support for the same
device [2]. Almost everything worked, except for three GPIOs which I was
not able to
Thanks.
The second version of the patch sets all three netdev trigger values properly.
(tested by hand-editing the change to R7800)
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
In the upstream netdev led trigger the one mode file was replaced by 3
files named rx, tx and link. Fix the netdev trigger configuration code
to use the modified API.
Fixes: aa3b6a08c56 ("kernel: Replace ledtrig-netdev with upstream backport")
Signed-off-by: Hauke Mehrtens
---
Based on editing the respective file manually in a live router, the patch
fixes it partially:
Now there is permanently lit wan led in R7800, but no blinking for wan activity.
R7800 has the mode as "link tx rx", but the patch only does action for
/sys/class/leds/r7800\:white\:wan/link
```
In the upstream netdev led trigger the one mode file was replaced by 3
files named rx, tx and link. Fix the netdev trigger configuration code
to use the modified API.
Fixes: aa3b6a08c56 ("kernel: Replace ledtrig-netdev with upstream backport")
Signed-off-by: Hauke Mehrtens
---
From the Documentation/devicetree/bindings/leds/common.txt:
- default-state : The initial state of the LED. Valid values are "on", "off",
and "keep". If the LED is already on or off and the default-state property is
set the to same value, then no glitch should be produced where the LED
Klaus Kudielka [2018-12-16 09:52:27]:
> Anyway, in the meantime I found a more recent discussion on linux-kernel
> [1]. It still seems to circle around the interface.
Thanks for the pointer. Well that discussion has happened in May, but that new
LED pattern trigger code was added in October, I
On 15.12.18 21:32, Petr Štetiar wrote:
I'm sorry, but I think, that this is not going to be that easy :-)
Thanks for pointing that out after getting me in :-) Anyway, in the
meantime I found a more recent discussion on linux-kernel [1]. It still
seems to circle around the interface. I
19 matches
Mail list logo
