Op 2 feb. 2020, om 18:20 heeft m...@adrianschmutzler.de het volgende geschreven:
> ...
> We could also use KERNEL_DTB_LZMA of course, but I do not think this will
> really bring a benefit.
Preferable, as it is more clear what it is supposed to do, e.g. to those that
are not enjoying the OpenWrt
Hi Adrian,
On 02.02.2020 18:20, m...@adrianschmutzler.de wrote:
Hi Piotr,
-Original Message-
From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
On Behalf Of Piotr Dymacz
Sent: Sonntag, 2. Februar 2020 18:02
To: Adrian Schmutzler ; openwrt-
de...@lists.openwrt.org
Merged into buildbot.git, branch master at
http://git.lede-project.org/?p=buildbot.git.
Thank you!
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Hi Piotr,
> -Original Message-
> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
> On Behalf Of Piotr Dymacz
> Sent: Sonntag, 2. Februar 2020 18:02
> To: Adrian Schmutzler ; openwrt-
> de...@lists.openwrt.org
> Subject: Re: [OpenWrt-Devel] [PATCH] ath79: introduces
Hi Daniel,
several comments inline below.
> -Original Message-
> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
> On Behalf Of Daniel Golle
> Sent: Sonntag, 2. Februar 2020 17:42
> To: openwrt-devel@lists.openwrt.org
> Subject: [OpenWrt-Devel] [PATCH 3/3] ath79: add
Hi Adrian,
On 02.02.2020 13:48, Adrian Schmutzler wrote:
This introduce a variable KERNEL_LZMA to replace the frequently
used sequence "kernel-bin | append-dtb | lzma", similar to the
KERNEL_DTB variable in ramips target.
So in results we will have:
ramips: KERNEL_DTB = kernel-bin |
AR934x chips also got the 'old' qca,ar9330-uart in addition to the
'new' ns16550a compatible one.
Add device-tree bindings in ar934x.dtsi to make use of it.
Reported-by: Piotr Dymacz
Signed-off-by: Daniel Golle
---
Unfortunately this doesn't work yet, I suspect a clock output doesn't
get
The Teltonika RUT955 is an industrial 2G/3G/4G WiFi router with
various additional inputs and outputs.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344)
- built-in
For devices having LEDs or buttons connected via I2C or SPI connected
GPIO chips it is desireable to access these busses early during boot
in order to signal progress and failsafe-mode. Hence have support for
i2c-gpio and spi-gpio built-into the kernel on generic (ie. non-tiny)
systems.
Hi,
We would like to organize a public, free of charge OpenWrt developer
meeting at the Battlemesh this year. The Wireless Battle of the Mesh
(Battlemesh) is an event that aims at bringing together people from
across the world to test the performance of different routing protocols
for ad-hoc
This introduce a variable KERNEL_LZMA to replace the frequently
used sequence "kernel-bin | append-dtb | lzma", similar to the
KERNEL_DTB variable in ramips target.
Signed-off-by: Adrian Schmutzler
---
target/linux/ath79/image/Makefile | 5 +++--
Since commit b44417c instance: provide error feedback if ujail binary is
missing, worrying log spam of the form "unable to find /sbin/jail ..."
may be encountered.
On systems not configured with jail capabilities the lack of jail binary
is not an error, whilst on systems with jail capabilities
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Hi Roger,
On Sun, Feb 2, 2020 at
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Hello,
should
iw phy1 set
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Hi all,
I'm not sure if this is
15 matches
Mail list logo