[RFC 1/2] ath79: add nvmem cell mac-address-ascii support

2022-04-08 Thread Yousong Zhou
This is needed for devices with mac address stored in ascii format, e.g. HiWiFi HC6361 to be ported in the following patch. Signed-off-by: Yousong Zhou --- ...of_net-add-mac-address-ascii-support.patch | 103 ++ .../408-mtd-redboot_partition_scan.patch | 4 +- ...of_net-ad

[RFC 0/2] Backport HiWiFi HC6361 support from ar71xx

2022-04-08 Thread Yousong Zhou
The device support was left out during the ath79 migration, mainly delayed by how to add device tree support for fetching ascii mac address In this series, patches were added for supporting "mac-address-ascii" nvmem cells. At the moment it will be able to read mac address in the form of 00:11:22:

[RFC 2/2] ath79: port HiWiFi HC6361 from ar71xx

2022-04-08 Thread Yousong Zhou
The device was added for ar71xx target and dropped during the ath79 transition, mainly because of the ascii mac address stored in bdinfo partition Device page, http://wiki.openwrt.org/toh/hiwifi/hc6361 The vendor u-boot image accepts sysupgrade.bin image with specific requirements, including havi

Re: [PATCH] firewall3: remove unnecessary fw3_has_table

2022-04-08 Thread Wenli Looi
On Mon, Feb 21, 2022 at 2:31 PM Rui Salvaterra wrote: > > Hi, Ansuel, > > On Mon, 21 Feb 2022 at 16:09, Ansuel Smith wrote: > > > > Hi, sorry for the delay... I reverted my patch and applied this > > and I can confirm that this works correctly on linux 5.15. > > No worries, thanks for confirming.

Re: [PATCH v2] ath79: add support for Ubiquiti NanoBeam M5

2022-04-08 Thread Matthias Schiffer
On 27/03/2022 21:25, g...@aiyionpri.me wrote: From: Jan-Niklas Burfeind Ubiquiti NanoBeam M5 devices are CPE equipment for customer locations with one Ethernet port and a 5 GHz 300Mbps wireless interface. Please provide the output of dmesg after boot - I'd like to check a few things. Also se

Patch: ath79: Move TPLink WPA8630Pv2 to tiny target

2022-04-08 Thread Joseph Mullally
https://github.com/openwrt/openwrt/pull/4500#issuecomment-1090822176 Old patch that may not be visible on the recent PRs. > These devices only have 6MiB available for firmware, > which is not enough for recent release images, so > move these to the tiny target. Tested by others and reviewed, sho

[PATCH 21.02] ramips: fix reboot for remaining 32 MB boards

2022-04-08 Thread Piotr Dymacz
From: Michael Pratt The following devices have a Winbond W25Q256FV flash chip, which does not have the RESET pin enabled by default, and otherwise would require setting a bit in a status register. Before moving to Linux 5.4, we had the patch: 0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch whi