Add support for Netgear WPN824N.
Hardware specs:
* AR7240, 4 LAN ports, 1 WAN port
* AR9285 WLAN
* 32 MB RAM
* 4 MB Flash
* 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color
effect)
* 3 Buttons (not supported)
Signed-off-by: Hartmut Knaack <knaac...@gmx.de>
---
Development Thread: https://forum.openwrt.org/viewtopic.php?id=30388
Test result: https://forum.openwrt.org/viewtopic.php?pid=313815#p313815
Wiki Page: https://wiki.openwrt.org/toh/netgear/wpn824n
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
.../ar71xx/base-files/etc/uci-defaults/01_leds | 20 +++-
.../ar71xx/base-files/etc/uci-defaults/02_network | 3 +-
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../lib/preinit/05_set_preinit_iface_ar71xx | 1 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 3 +-
.../ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c | 124 ++++++++++++++++++++-
target/linux/ar71xx/generic/profiles/netgear.mk | 10 ++
target/linux/ar71xx/image/Makefile | 1 +
.../patches-3.18/907-MIPS-ath79-add-WPN824N.patch | 21 ++++
.../files/drivers/mtd/mtdsplit/mtdsplit_uimage.c | 2 +
11 files changed, 185 insertions(+), 6 deletions(-)
create mode 100644
target/linux/ar71xx/patches-3.18/907-MIPS-ath79-add-WPN824N.patch
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index 89fe53c..178825a 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -324,7 +324,8 @@ get_status_led() {
wnr2000 | \
wnr2200 |\
wnr612-v2 |\
- wnr1000-v2)
+ wnr1000-v2 |\
+ wpn824n)
status_led="netgear:green:power"
;;
wp543)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 5241db2..3b43011 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -563,7 +563,25 @@ wnr2000-v4)
ucidef_set_led_switch "lan3" "LAN3" "netgear:amber:lan3" "switch0"
"0x08"
ucidef_set_led_switch "lan4" "LAN4" "netgear:amber:lan4" "switch0"
"0x10"
ucidef_set_led_usbdev "usb" "USB" "netgear:amber:status" "1-1"
- ;;
+ ;;
+
+wpn824n)
+ ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan"
"eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1"
"switch0" "0x02"
+ ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2"
"switch0" "0x04"
+ ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3"
"switch0" "0x08"
+ ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4"
"switch0" "0x10"
+ ucidef_set_led_default "lan1green" "LAN1 (green)" "netgear:green:lan1"
"0"
+ ucidef_set_led_default "lan2green" "LAN2 (green)" "netgear:green:lan2"
"0"
+ ucidef_set_led_default "lan3green" "LAN3 (green)" "netgear:green:lan3"
"0"
+ ucidef_set_led_default "lan4green" "LAN4 (green)" "netgear:green:lan4"
"0"
+ ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
+ ucidef_set_led_default "wps1" "WPS1" "netgear:blue:wps1" "0"
+ ucidef_set_led_default "wps2" "WPS2" "netgear:blue:wps2" "0"
+ ucidef_set_led_default "status" "STATUS" "netgear:amber:status" "0"
+ ucidef_set_led_default "test" "TEST" "netgear:amber:test" "0"
+ ;;
wzr-hp-ag300h)
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 8143d2d..9a7e01e 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -230,7 +230,8 @@ wnr2000-v3 |\
wnr2000-v4 |\
wnr2200 |\
wnr612-v2 |\
-wnr1000-v2)
+wnr1000-v2 |\
+wpn824n)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 0b2857d..c8b9893 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -896,6 +896,9 @@ ar71xx_board_detect() {
*"WNR1000 V2")
name="wnr1000-v2"
;;
+ *WPN824N)
+ name="wpn824n"
+ ;;
*WRT160NL)
name="wrt160nl"
;;
diff --git
a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
index f11ea8c..113af58 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
@@ -39,6 +39,7 @@ set_preinit_iface() {
wnr2200 |\
wnr612-v2 |\
wnr1000-v2 |\
+ wpn824n |\
wpe72)
ifname=eth1
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 8dea48f..ea7ee27 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -401,7 +401,8 @@ platform_check_image() {
wndr3700 | \
wnr2000-v3 | \
wnr612-v2 | \
- wnr1000-v2)
+ wnr1000-v2 | \
+ wpn824n)
local hw_magic
hw_magic="$(ar71xx_get_mtd_part_magic firmware)"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
index 2e14782..205c2e7 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
@@ -1,7 +1,8 @@
/*
- * NETGEAR WNR2000v3/WNR612v2/WNR1000v2 board support
+ * NETGEAR WNR2000v3/WNR612v2/WNR1000v2/WPN824N board support
*
- * Copytight (C) 2013 Mathieu Olivari <mathieu.oliv...@gmail.com>
+ * Copyright (C) 2015 Hartmut Knaack <knaac...@gmx.de>
+ * Copyright (C) 2013 Mathieu Olivari <mathieu.oliv...@gmail.com>
* Copyright (C) 2008-2009 Gabor Juhos <juh...@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <ka...@openwrt.org>
* Copyright (C) 2008-2009 Andy Boyett <a...@openwrt.org>
@@ -15,6 +16,8 @@
#include <linux/mtd/partitions.h>
#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */
+#include "common.h" /* needed to disable switch LEDs */
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
@@ -34,6 +37,29 @@
#define WNR1000V2_GPIO_LED_PWR_AMBER 1
#define WNR1000V2_GPIO_LED_PWR_GREEN 11
+/* Connected through AR7240 */
+#define WPN824N_GPIO_LED_WAN_AMBER 0
+#define WPN824N_GPIO_LED_STATUS_AMBER 1
+#define WPN824N_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
+#define WPN824N_GPIO_LED_LAN2_AMBER 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
+#define WPN824N_GPIO_LED_LAN3_AMBER 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
+#define WPN824N_GPIO_LED_LAN4_AMBER 12
+#define WPN824N_GPIO_LED_LAN1_GREEN 13
+#define WPN824N_GPIO_LED_LAN2_GREEN 14
+#define WPN824N_GPIO_LED_LAN3_GREEN 15 /* AR724X_GPIO_FUNC_CLK_OBS3_EN */
+#define WPN824N_GPIO_LED_LAN4_GREEN 16
+#define WPN824N_GPIO_LED_WAN_GREEN 17
+
+/* Connected through AR9285 */
+#define WPN824N_WGPIO_LED_PWR_GREEN 0
+#define WPN824N_WGPIO_LED_WLAN_BLUE 1
+#define WPN824N_WGPIO_LED_WPS1_BLUE 5
+#define WPN824N_WGPIO_LED_WPS2_BLUE 9
+#define WPN824N_WGPIO_LED_TEST_AMBER 10
+#define WPN824N_WGPIO_BTN_PUSH 6 /* currently unused */
+#define WPN824N_WGPIO_BTN_RESET 7 /* currently unused */
+#define WPN824N_WGPIO_BTN_WLAN 8 /* currently unused */
+
#define WNR2000V3_KEYS_POLL_INTERVAL 20 /* msecs */
#define WNR2000V3_KEYS_DEBOUNCE_INTERVAL (3 *
WNR2000V3_KEYS_POLL_INTERVAL)
@@ -73,6 +99,78 @@ static struct gpio_led wnr1000v2_leds_gpio[] __initdata = {
}
};
+static struct gpio_led wpn824n_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:amber:wan",
+ .gpio = WPN824N_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:status",
+ .gpio = WPN824N_GPIO_LED_STATUS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan1",
+ .gpio = WPN824N_GPIO_LED_LAN1_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan2",
+ .gpio = WPN824N_GPIO_LED_LAN2_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan3",
+ .gpio = WPN824N_GPIO_LED_LAN3_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan4",
+ .gpio = WPN824N_GPIO_LED_LAN4_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan1",
+ .gpio = WPN824N_GPIO_LED_LAN1_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan2",
+ .gpio = WPN824N_GPIO_LED_LAN2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan3",
+ .gpio = WPN824N_GPIO_LED_LAN3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan4",
+ .gpio = WPN824N_GPIO_LED_LAN4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:wan",
+ .gpio = WPN824N_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led wpn824n_wmac_leds_gpio[] = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WPN824N_WGPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:blue:wlan",
+ .gpio = WPN824N_WGPIO_LED_WLAN_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "netgear:blue:wps1",
+ .gpio = WPN824N_WGPIO_LED_WPS1_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "netgear:blue:wps2",
+ .gpio = WPN824N_WGPIO_LED_WPS2_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:test",
+ .gpio = WPN824N_WGPIO_LED_TEST_AMBER,
+ .active_low = 1,
+ }
+};
+
static struct gpio_keys_button wnr2000v3_gpio_keys[] __initdata = {
{
.desc = "wps",
@@ -138,3 +236,25 @@ static void __init wnr1000v2_setup(void)
}
MIPS_MACHINE(ATH79_MACH_WNR1000_V2, "WNR1000V2", "NETGEAR WNR1000 V2",
wnr1000v2_setup);
+
+static void __init wpn824n_setup(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN |
+ AR724X_GPIO_FUNC_CLK_OBS3_EN);
+
+ wnr_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wpn824n_leds_gpio),
+ wpn824n_leds_gpio);
+
+ ap9x_pci_setup_wmac_led_pin(0, WPN824N_WGPIO_LED_WLAN_BLUE);
+ ap9x_pci_setup_wmac_leds(0, wpn824n_wmac_leds_gpio,
+ ARRAY_SIZE(wpn824n_wmac_leds_gpio));
+}
+
+MIPS_MACHINE(ATH79_MACH_WPN824N, "WPN824N", "NETGEAR WPN824N", wpn824n_setup);
diff --git a/target/linux/ar71xx/generic/profiles/netgear.mk
b/target/linux/ar71xx/generic/profiles/netgear.mk
index 16b1087..ca22a18 100644
--- a/target/linux/ar71xx/generic/profiles/netgear.mk
+++ b/target/linux/ar71xx/generic/profiles/netgear.mk
@@ -82,3 +82,13 @@ define Profile/WNR2200/Description
endef
$(eval $(call Profile,WNR2200))
+
+define Profile/WPN824N
+ NAME:=NETGEAR WPN824N
+endef
+
+define Profile/WPN824N/Description
+ Package set optimized for the NETGEAR WPN824N
+endef
+
+$(eval $(call Profile,WPN824N))
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
index 4336697..07ec8dc 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1958,6 +1958,7 @@ $(eval $(call
SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,
$(eval $(call
SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
$(eval $(call
SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
$(eval $(call
SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
+$(eval $(call
SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,""
NA,))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
diff --git a/target/linux/ar71xx/patches-3.18/907-MIPS-ath79-add-WPN824N.patch
b/target/linux/ar71xx/patches-3.18/907-MIPS-ath79-add-WPN824N.patch
new file mode 100644
index 0000000..2f0c964
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/907-MIPS-ath79-add-WPN824N.patch
@@ -0,0 +1,21 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -741,7 +741,7 @@ config ATH79_MACH_WNR2000
+ select ATH79_DEV_WMAC
+
+ config ATH79_MACH_WNR2000_V3
+- bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support"
++ bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -204,6 +204,7 @@ enum ath79_mach_type {
+ ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
+ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
+ ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */
++ ATH79_MACH_WPN824N, /* NETGEAR WPN824N */
+ ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPE72, /* Compex WPE72 */
+ ATH79_MACH_WPJ344, /* Compex WPJ344 */
diff --git a/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c
b/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c
index 2602f98..b815869 100644
--- a/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c
+++ b/target/linux/generic/files/drivers/mtd/mtdsplit/mtdsplit_uimage.c
@@ -252,6 +252,7 @@ static struct mtd_part_parser uimage_generic_parser = {
#define FW_MAGIC_WNR1000V2_VC 0x31303030
#define FW_MAGIC_WNDR3700 0x33373030
#define FW_MAGIC_WNDR3700V2 0x33373031
+#define FW_MAGIC_WPN824N 0x31313030
static ssize_t uimage_verify_wndr3700(u_char *buf, size_t len)
{
@@ -266,6 +267,7 @@ static ssize_t uimage_verify_wndr3700(u_char *buf, size_t
len)
case FW_MAGIC_WNR2200:
case FW_MAGIC_WNDR3700:
case FW_MAGIC_WNDR3700V2:
+ case FW_MAGIC_WPN824N:
break;
case FW_MAGIC_WNR2000V4:
expected_type = IH_TYPE_KERNEL;
--
2.7.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
