Hello Adrian,
On 5/20/20 3:41 PM, m...@adrianschmutzler.de wrote:
> Hi David,
>
>> +label-mac-device =
>
> this only works if you set mtd-mac-address in DTS.
>
> In your case, you need to add
>
> label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
>
> to the mac address section
Hi David,
> + label-mac-device =
this only works if you set mtd-mac-address in DTS.
In your case, you need to add
label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
to the mac address section of 02_network.
Despite, is there a need for the DT labels flash0, flash1 and ath9k? If
Hardware
SoC:Atheros AR9344
RAM:128M DDR2
FLASH: 2x Macronix MX25L12845EM
2x 16MiB SPI-NOR
WLAN2: Atheros AR9344 2x2 2T2R
WLAN5: Atheros AR9580 2x2 2T2R
SERIAL: Cisco-RJ45 on the back (115200 8n1)
Installation
The U-Boot CLI is password protected (using