On 04/03/15 18:14, James Hilliard wrote:
We tried changing the chip-delay parameter in the openwrt dtsi file to
match the GPL source
https://github.com/jameshilliard/actiontec_opensrc_mi424wr-rev-i_fw-40-21-18/blob/34b1f338344ebd36543c9fbcb4870bb6f6914cb8/rg/vendor/marvell/feroceon/linux-2.6/arc
On 04/03/15 18:14, James Hilliard wrote:
I wrote the image to flash using tftp from uboot, I'm having trouble
isolating the cause of the ECC errors, what I'm not sure of is if
there's a quirk with the Hynix NAND that the Eon NAND doesn't have.
It would appear that the Hynix and Eon NAND chips ar
I wrote the image to flash using tftp from uboot, I'm having trouble
isolating the cause of the ECC errors, what I'm not sure of is if
there's a quirk with the Hynix NAND that the Eon NAND doesn't have.
It would appear that the Hynix and Eon NAND chips are used
interchangeably for this router mode
On 22/02/15 01:36, James Hilliard wrote:
I've been trying to install OpenWRT on an Actiontec MI424WR Rev I,
however some variants of this router use a Hynix NAND chip that OpenWRT
doesn't seem to be able to access. There are other versions of this
router that use a Eon NAND chip that works fine.
I've been trying to install OpenWRT on an Actiontec MI424WR Rev I, however
some variants of this router use a Hynix NAND chip that OpenWRT doesn't
seem to be able to access. There are other versions of this router that use
a Eon NAND chip that works fine. I've attached the full boot-log. The stock
