Re: [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M

> "Russell" == Russell Senior writes: > "Russell" == Russell Senior writes: > "John" == John Crispin writes: John> i'll try to test during the day. i had tested most socs but John> apparently 5350 still has

Re: [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M

Hi Russel, i'll have a look now. can you do me a favour and stop this utterly bizarre quotation style ? we prefer to have normally formatted mails. John On 02/01/2016 10:58, Russell Senior wrote: >> "Russell" == Russell Senior writes: > >> "Russell"

Re: [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M

On Sat, Jan 2, 2016 at 2:45 AM, John Crispin wrote: > Hi Russel, > > i'll have a look now. [...] Ethernet appears to be working (no more panics) in r48064, thanks! ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org

Re: [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M

> "Russell" == Russell Senior writes: > "John" == John Crispin writes: John> i'll try to test during the day. i had tested most socs but John> apparently 5350 still has an issue. Russell> Yes, I saw this too, and was about to report it.

Re: [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M

> "John" == John Crispin writes: John> i'll try to test during the day. i had tested most socs but John> apparently 5350 still has an issue. Yes, I saw this too, and was about to report it. I'm seeing it on an AsiaRF AWM002, which is also an RT5350. swconfig list

Re: [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M

i'll try to test during the day. i had tested most socs but apparently 5350 still has an issue. On 19/12/2015 23:57, Christian Lamparter wrote: > Hello, > > I'm looking into a issue with M2M [0] (It's a RT5350 device). > Currently, the sole ethernet - port on this device is not > working.

[OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M

Hello, I'm looking into a issue with M2M [0] (It's a RT5350 device). Currently, the sole ethernet - port on this device is not working. Instead during, I get the following messages on the serial: "Failed to connect to the switch. Use the "list" command to see which switches are available."